// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;

import { Predeploys } from "src/libraries/Predeploys.sol";
import { StandardBridge } from "src/universal/StandardBridge.sol";
import { ISemver } from "src/universal/ISemver.sol";
import { CrossDomainMessenger } from "src/universal/CrossDomainMessenger.sol";
import { SuperchainConfig } from "src/L1/SuperchainConfig.sol";
import { Constants } from "src/libraries/Constants.sol";

/// @custom:proxied
/// @title L1StandardBridge
/// @notice The L1StandardBridge is responsible for transfering ETH and ERC20 tokens between L1 and
///         L2. In the case that an ERC20 token is native to L1, it will be escrowed within this
///         contract. If the ERC20 token is native to L2, it will be burnt. Before Bedrock, ETH was
///         stored within this contract. After Bedrock, ETH is instead stored inside the
///         OptimismPortal contract.
///         NOTE: this contract is not intended to support all variations of ERC20 tokens. Examples
///         of some token types that may not be properly supported by this contract include, but are
///         not limited to: tokens with transfer fees, rebasing tokens, and tokens with blocklists.
contract L1StandardBridge is StandardBridge, ISemver {
    /// @custom:legacy
    /// @notice Emitted whenever a deposit of ETH from L1 into L2 is initiated.
    /// @param from      Address of the depositor.
    /// @param to        Address of the recipient on L2.
    /// @param amount    Amount of ETH deposited.
    /// @param extraData Extra data attached to the deposit.
    event ETHDepositInitiated(address indexed from, address indexed to, uint256 amount, bytes extraData);

    /// @custom:legacy
    /// @notice Emitted whenever a withdrawal of ETH from L2 to L1 is finalized.
    /// @param from      Address of the withdrawer.
    /// @param to        Address of the recipient on L1.
    /// @param amount    Amount of ETH withdrawn.
    /// @param extraData Extra data attached to the withdrawal.
    event ETHWithdrawalFinalized(address indexed from, address indexed to, uint256 amount, bytes extraData);

    /// @custom:legacy
    /// @notice Emitted whenever an ERC20 deposit is initiated.
    /// @param l1Token   Address of the token on L1.
    /// @param l2Token   Address of the corresponding token on L2.
    /// @param from      Address of the depositor.
    /// @param to        Address of the recipient on L2.
    /// @param amount    Amount of the ERC20 deposited.
    /// @param extraData Extra data attached to the deposit.
    event ERC20DepositInitiated(
        address indexed l1Token,
        address indexed l2Token,
        address indexed from,
        address to,
        uint256 amount,
        bytes extraData
    );

    /// @custom:legacy
    /// @notice Emitted whenever an ERC20 withdrawal is finalized.
    /// @param l1Token   Address of the token on L1.
    /// @param l2Token   Address of the corresponding token on L2.
    /// @param from      Address of the withdrawer.
    /// @param to        Address of the recipient on L1.
    /// @param amount    Amount of the ERC20 withdrawn.
    /// @param extraData Extra data attached to the withdrawal.
    event ERC20WithdrawalFinalized(
        address indexed l1Token,
        address indexed l2Token,
        address indexed from,
        address to,
        uint256 amount,
        bytes extraData
    );

    /// @notice Semantic version.
    /// @custom:semver 2.0.0
    string public constant version = "2.0.0";

    /// @notice Address of the SuperchainConfig contract.
    SuperchainConfig public superchainConfig;

    /// @notice Constructs the L1StandardBridge contract.
    /// @param _messenger Address of the L1CrossDomainMessenger.
    constructor(address payable _messenger) StandardBridge(_messenger, payable(Predeploys.L2_STANDARD_BRIDGE)) {
        initialize({ _superchainConfig: SuperchainConfig(address(0)) });
    }

    /// @notice Initializes the contract.
    /// @param _superchainConfig Address of the SuperchainConfig contract on this network.
    function initialize(SuperchainConfig _superchainConfig) public initializer {
        superchainConfig = _superchainConfig;
    }

    /// @inheritdoc StandardBridge
    function paused() public view override returns (bool) {
        return superchainConfig.paused();
    }

    /// @notice Allows EOAs to bridge ETH by sending directly to the bridge.
    receive() external payable override onlyEOA {
        _initiateETHDeposit(msg.sender, msg.sender, RECEIVE_DEFAULT_GAS_LIMIT, bytes(""));
    }

    /// @custom:legacy
    /// @notice Deposits some amount of ETH into the sender's account on L2.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    ///                     Data supplied here will not be used to execute any code on L2 and is
    ///                     only emitted as extra data for the convenience of off-chain tooling.
    function depositETH(uint32 _minGasLimit, bytes calldata _extraData) external payable onlyEOA {
        _initiateETHDeposit(msg.sender, msg.sender, _minGasLimit, _extraData);
    }

    /// @custom:legacy
    /// @notice Deposits some amount of ETH into a target account on L2.
    ///         Note that if ETH is sent to a contract on L2 and the call fails, then that ETH will
    ///         be locked in the L2StandardBridge. ETH may be recoverable if the call can be
    ///         successfully replayed by increasing the amount of gas supplied to the call. If the
    ///         call will fail for any amount of gas, then the ETH will be locked permanently.
    /// @param _to          Address of the recipient on L2.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    ///                     Data supplied here will not be used to execute any code on L2 and is
    ///                     only emitted as extra data for the convenience of off-chain tooling.
    function depositETHTo(address _to, uint32 _minGasLimit, bytes calldata _extraData) external payable {
        _initiateETHDeposit(msg.sender, _to, _minGasLimit, _extraData);
    }

    /// @custom:legacy
    /// @notice Deposits some amount of ERC20 tokens into the sender's account on L2.
    /// @param _l1Token     Address of the L1 token being deposited.
    /// @param _l2Token     Address of the corresponding token on L2.
    /// @param _amount      Amount of the ERC20 to deposit.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    ///                     Data supplied here will not be used to execute any code on L2 and is
    ///                     only emitted as extra data for the convenience of off-chain tooling.
    function depositERC20(
        address _l1Token,
        address _l2Token,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    )
        external
        virtual
        onlyEOA
    {
        _initiateERC20Deposit(_l1Token, _l2Token, msg.sender, msg.sender, _amount, _minGasLimit, _extraData);
    }

    /// @custom:legacy
    /// @notice Deposits some amount of ERC20 tokens into a target account on L2.
    /// @param _l1Token     Address of the L1 token being deposited.
    /// @param _l2Token     Address of the corresponding token on L2.
    /// @param _to          Address of the recipient on L2.
    /// @param _amount      Amount of the ERC20 to deposit.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    ///                     Data supplied here will not be used to execute any code on L2 and is
    ///                     only emitted as extra data for the convenience of off-chain tooling.
    function depositERC20To(
        address _l1Token,
        address _l2Token,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    )
        external
        virtual
    {
        _initiateERC20Deposit(_l1Token, _l2Token, msg.sender, _to, _amount, _minGasLimit, _extraData);
    }

    /// @custom:legacy
    /// @notice Finalizes a withdrawal of ETH from L2.
    /// @param _from      Address of the withdrawer on L2.
    /// @param _to        Address of the recipient on L1.
    /// @param _amount    Amount of ETH to withdraw.
    /// @param _extraData Optional data forwarded from L2.
    function finalizeETHWithdrawal(
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    )
        external
        payable
    {
        finalizeBridgeETH(_from, _to, _amount, _extraData);
    }

    /// @custom:legacy
    /// @notice Finalizes a withdrawal of ERC20 tokens from L2.
    /// @param _l1Token   Address of the token on L1.
    /// @param _l2Token   Address of the corresponding token on L2.
    /// @param _from      Address of the withdrawer on L2.
    /// @param _to        Address of the recipient on L1.
    /// @param _amount    Amount of the ERC20 to withdraw.
    /// @param _extraData Optional data forwarded from L2.
    function finalizeERC20Withdrawal(
        address _l1Token,
        address _l2Token,
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    )
        external
    {
        finalizeBridgeERC20(_l1Token, _l2Token, _from, _to, _amount, _extraData);
    }

    /// @custom:legacy
    /// @notice Retrieves the access of the corresponding L2 bridge contract.
    /// @return Address of the corresponding L2 bridge contract.
    function l2TokenBridge() external view returns (address) {
        return address(OTHER_BRIDGE);
    }

    /// @notice Internal function for initiating an ETH deposit.
    /// @param _from        Address of the sender on L1.
    /// @param _to          Address of the recipient on L2.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    function _initiateETHDeposit(address _from, address _to, uint32 _minGasLimit, bytes memory _extraData) internal {
        _initiateBridgeETH(_from, _to, msg.value, _minGasLimit, _extraData);
    }

    /// @notice Internal function for initiating an ERC20 deposit.
    /// @param _l1Token     Address of the L1 token being deposited.
    /// @param _l2Token     Address of the corresponding token on L2.
    /// @param _from        Address of the sender on L1.
    /// @param _to          Address of the recipient on L2.
    /// @param _amount      Amount of the ERC20 to deposit.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    function _initiateERC20Deposit(
        address _l1Token,
        address _l2Token,
        address _from,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes memory _extraData
    )
        internal
    {
        _initiateBridgeERC20(_l1Token, _l2Token, _from, _to, _amount, _minGasLimit, _extraData);
    }

    /// @inheritdoc StandardBridge
    /// @notice Emits the legacy ETHDepositInitiated event followed by the ETHBridgeInitiated event.
    ///         This is necessary for backwards compatibility with the legacy bridge.
    function _emitETHBridgeInitiated(
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        override
    {
        emit ETHDepositInitiated(_from, _to, _amount, _extraData);
        super._emitETHBridgeInitiated(_from, _to, _amount, _extraData);
    }

    /// @inheritdoc StandardBridge
    /// @notice Emits the legacy ERC20DepositInitiated event followed by the ERC20BridgeInitiated
    ///         event. This is necessary for backwards compatibility with the legacy bridge.
    function _emitETHBridgeFinalized(
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        override
    {
        emit ETHWithdrawalFinalized(_from, _to, _amount, _extraData);
        super._emitETHBridgeFinalized(_from, _to, _amount, _extraData);
    }

    /// @inheritdoc StandardBridge
    /// @notice Emits the legacy ERC20WithdrawalFinalized event followed by the ERC20BridgeFinalized
    ///         event. This is necessary for backwards compatibility with the legacy bridge.
    function _emitERC20BridgeInitiated(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        override
    {
        emit ERC20DepositInitiated(_localToken, _remoteToken, _from, _to, _amount, _extraData);
        super._emitERC20BridgeInitiated(_localToken, _remoteToken, _from, _to, _amount, _extraData);
    }

    /// @inheritdoc StandardBridge
    /// @notice Emits the legacy ERC20WithdrawalFinalized event followed by the ERC20BridgeFinalized
    ///         event. This is necessary for backwards compatibility with the legacy bridge.
    function _emitERC20BridgeFinalized(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        override
    {
        emit ERC20WithdrawalFinalized(_localToken, _remoteToken, _from, _to, _amount, _extraData);
        super._emitERC20BridgeFinalized(_localToken, _remoteToken, _from, _to, _amount, _extraData);
    }
}
