op-batcher: rework channel & compressor config, fix overhead bug (#9887)

op-batcher/batcher/channel_builder.go

@@ -7,7 +7,6 @@ import (
 	"io"
 	"math"
 
-	"github.com/ethereum-optimism/optimism/op-batcher/compressor"
 	"github.com/ethereum-optimism/optimism/op-node/rollup"
 	"github.com/ethereum-optimism/optimism/op-node/rollup/derive"
 	"github.com/ethereum-optimism/optimism/op-service/eth"
@@ -35,81 +34,6 @@ func (e *ChannelFullError) Unwrap() error {
 	return e.Err
 }
 
-type ChannelConfig struct {
-	// Number of epochs (L1 blocks) per sequencing window, including the epoch
-	// L1 origin block itself
-	SeqWindowSize uint64
-	// The maximum number of L1 blocks that the inclusion transactions of a
-	// channel's frames can span.
-	ChannelTimeout uint64
-
-	// Builder Config
-
-	// MaxChannelDuration is the maximum duration (in #L1-blocks) to keep the
-	// channel open. This allows control over how long a channel is kept open
-	// during times of low transaction volume.
-	//
-	// If 0, duration checks are disabled.
-	MaxChannelDuration uint64
-	// The batcher tx submission safety margin (in #L1-blocks) to subtract from
-	// a channel's timeout and sequencing window, to guarantee safe inclusion of
-	// a channel on L1.
-	SubSafetyMargin uint64
-	// The maximum byte-size a frame can have.
-	MaxFrameSize uint64
-
-	// CompressorConfig contains the configuration for creating new compressors.
-	CompressorConfig compressor.Config
-
-	// BatchType indicates whether the channel uses SingularBatch or SpanBatch.
-	BatchType uint
-
-	// Whether to put all frames of a channel inside a single tx.
-	// Should only be used for blob transactions.
-	MultiFrameTxs bool
-}
-
-func (cc *ChannelConfig) MaxFramesPerTx() int {
-	if !cc.MultiFrameTxs {
-		return 1
-	}
-	return cc.CompressorConfig.TargetNumFrames
-}
-
-// Check validates the [ChannelConfig] parameters.
-func (cc *ChannelConfig) Check() error {
-	// The [ChannelTimeout] must be larger than the [SubSafetyMargin].
-	// Otherwise, new blocks would always be considered timed out.
-	if cc.ChannelTimeout < cc.SubSafetyMargin {
-		return ErrInvalidChannelTimeout
-	}
-
-	// If the [MaxFrameSize] is set to 0, the channel builder
-	// will infinitely loop when trying to create frames in the
-	// [ChannelBuilder.OutputFrames] function.
-	if cc.MaxFrameSize == 0 {
-		return errors.New("max frame size cannot be zero")
-	}
-
-	// If the [MaxFrameSize] is less than [FrameV0OverHeadSize], the channel
-	// out will underflow the maxSize variable in the [derive.ChannelOut].
-	// Since it is of type uint64, it will wrap around to a very large
-	// number, making the frame size extremely large.
-	if cc.MaxFrameSize < derive.FrameV0OverHeadSize {
-		return fmt.Errorf("max frame size %d is less than the minimum 23", cc.MaxFrameSize)
-	}
-
-	if cc.BatchType > derive.SpanBatchType {
-		return fmt.Errorf("unrecognized batch type: %d", cc.BatchType)
-	}
-
-	if nf := cc.CompressorConfig.TargetNumFrames; nf < 1 {
-		return fmt.Errorf("invalid number of frames %d", nf)
-	}
-
-	return nil
-}
-
 type frameID struct {
 	chID        derive.ChannelID
 	frameNumber uint16
@@ -371,9 +295,9 @@ func (c *ChannelBuilder) OutputFrames() error {
 // This is part of an optimization to already generate frames and send them off
 // as txs while still collecting blocks in the channel builder.
 func (c *ChannelBuilder) outputReadyFrames() error {
-	// TODO: Decide whether we want to fill frames to max size and use target
-	// only for estimation, or use target size.
-	for c.co.ReadyBytes() >= int(c.cfg.MaxFrameSize) {
+	// When creating a frame from the ready compression data, the frame overhead
+	// will be added to the total output size, so we can add it in the condition.
+	for c.co.ReadyBytes()+derive.FrameV0OverHeadSize >= int(c.cfg.MaxFrameSize) {
 		if err := c.outputFrame(); err == io.EOF {
 			return nil
 		} else if err != nil {

op-batcher/batcher/channel_builder_test.go

@@ -3,13 +3,11 @@ package batcher
 import (
 	"bytes"
 	"errors"
-	"fmt"
 	"math"
 	"math/big"
 	"math/rand"
 	"testing"
 
-	"github.com/ethereum-optimism/optimism/op-batcher/compressor"
 	"github.com/ethereum-optimism/optimism/op-node/rollup"
 	"github.com/ethereum-optimism/optimism/op-node/rollup/derive"
 	dtest "github.com/ethereum-optimism/optimism/op-node/rollup/derive/test"
@@ -23,100 +21,11 @@ import (
 
 const latestL1BlockOrigin = 10
 
-var defaultTestChannelConfig = ChannelConfig{
-	SeqWindowSize:      15,
-	ChannelTimeout:     40,
-	MaxChannelDuration: 1,
-	SubSafetyMargin:    4,
-	MaxFrameSize:       120000,
-	CompressorConfig: compressor.Config{
-		TargetFrameSize:  100000,
-		TargetNumFrames:  1,
-		ApproxComprRatio: 0.4,
-	},
-	BatchType: derive.SingularBatchType,
-}
-
 var defaultTestRollupConfig = rollup.Config{
 	Genesis:   rollup.Genesis{L2: eth.BlockID{Number: 0}},
 	L2ChainID: big.NewInt(1234),
 }
 
-// TestChannelConfig_Check tests the [ChannelConfig] [Check] function.
-func TestChannelConfig_Check(t *testing.T) {
-	type test struct {
-		input     ChannelConfig
-		assertion func(error)
-	}
-
-	// Construct test cases that test the boundary conditions
-	zeroChannelConfig := defaultTestChannelConfig
-	zeroChannelConfig.MaxFrameSize = 0
-	timeoutChannelConfig := defaultTestChannelConfig
-	timeoutChannelConfig.ChannelTimeout = 0
-	timeoutChannelConfig.SubSafetyMargin = 1
-	tests := []test{
-		{
-			input: defaultTestChannelConfig,
-			assertion: func(output error) {
-				require.NoError(t, output)
-			},
-		},
-		{
-			input: timeoutChannelConfig,
-			assertion: func(output error) {
-				require.ErrorIs(t, output, ErrInvalidChannelTimeout)
-			},
-		},
-		{
-			input: zeroChannelConfig,
-			assertion: func(output error) {
-				require.EqualError(t, output, "max frame size cannot be zero")
-			},
-		},
-	}
-	for i := 1; i < derive.FrameV0OverHeadSize; i++ {
-		smallChannelConfig := defaultTestChannelConfig
-		smallChannelConfig.MaxFrameSize = uint64(i)
-		expectedErr := fmt.Sprintf("max frame size %d is less than the minimum 23", i)
-		tests = append(tests, test{
-			input: smallChannelConfig,
-			assertion: func(output error) {
-				require.EqualError(t, output, expectedErr)
-			},
-		})
-	}
-
-	// Run the table tests
-	for _, test := range tests {
-		test.assertion(test.input.Check())
-	}
-}
-
-// FuzzChannelConfig_CheckTimeout tests the [ChannelConfig] [Check] function
-// with fuzzing to make sure that a [ErrInvalidChannelTimeout] is thrown when
-// the [ChannelTimeout] is less than the [SubSafetyMargin].
-func FuzzChannelConfig_CheckTimeout(f *testing.F) {
-	for i := range [10]int{} {
-		f.Add(uint64(i+1), uint64(i))
-	}
-	f.Fuzz(func(t *testing.T, channelTimeout uint64, subSafetyMargin uint64) {
-		// We only test where [ChannelTimeout] is less than the [SubSafetyMargin]
-		// So we cannot have [ChannelTimeout] be [math.MaxUint64]
-		if channelTimeout == math.MaxUint64 {
-			channelTimeout = math.MaxUint64 - 1
-		}
-		if subSafetyMargin <= channelTimeout {
-			subSafetyMargin = channelTimeout + 1
-		}
-
-		channelConfig := defaultTestChannelConfig
-		channelConfig.ChannelTimeout = channelTimeout
-		channelConfig.SubSafetyMargin = subSafetyMargin
-		require.ErrorIs(t, channelConfig.Check(), ErrInvalidChannelTimeout)
-	})
-}
-
 // addMiniBlock adds a minimal valid L2 block to the channel builder using the
 // ChannelBuilder.AddBlock method.
 func addMiniBlock(cb *ChannelBuilder) error {
@@ -192,7 +101,7 @@ func FuzzDurationTimeoutZeroMaxChannelDuration(f *testing.F) {
 		f.Add(uint64(i))
 	}
 	f.Fuzz(func(t *testing.T, l1BlockNum uint64) {
-		channelConfig := defaultTestChannelConfig
+		channelConfig := defaultTestChannelConfig()
 		channelConfig.MaxChannelDuration = 0
 		cb, err := NewChannelBuilder(channelConfig, defaultTestRollupConfig, latestL1BlockOrigin)
 		require.NoError(t, err)
@@ -215,7 +124,7 @@ func FuzzChannelBuilder_DurationZero(f *testing.F) {
 		}
 
 		// Create the channel builder
-		channelConfig := defaultTestChannelConfig
+		channelConfig := defaultTestChannelConfig()
 		channelConfig.MaxChannelDuration = maxChannelDuration
 		cb, err := NewChannelBuilder(channelConfig, defaultTestRollupConfig, latestL1BlockOrigin)
 		require.NoError(t, err)
@@ -242,7 +151,7 @@ func FuzzDurationTimeoutMaxChannelDuration(f *testing.F) {
 		}
 
 		// Create the channel builder
-		channelConfig := defaultTestChannelConfig
+		channelConfig := defaultTestChannelConfig()
 		channelConfig.MaxChannelDuration = maxChannelDuration
 		cb, err := NewChannelBuilder(channelConfig, defaultTestRollupConfig, latestL1BlockOrigin)
 		require.NoError(t, err)
@@ -275,7 +184,7 @@ func FuzzChannelCloseTimeout(f *testing.F) {
 	}
 	f.Fuzz(func(t *testing.T, l1BlockNum uint64, channelTimeout uint64, subSafetyMargin uint64, timeout uint64) {
 		// Create the channel builder
-		channelConfig := defaultTestChannelConfig
+		channelConfig := defaultTestChannelConfig()
 		channelConfig.ChannelTimeout = channelTimeout
 		channelConfig.SubSafetyMargin = subSafetyMargin
 		cb, err := NewChannelBuilder(channelConfig, defaultTestRollupConfig, latestL1BlockOrigin)
@@ -303,7 +212,7 @@ func FuzzChannelZeroCloseTimeout(f *testing.F) {
 	}
 	f.Fuzz(func(t *testing.T, l1BlockNum uint64, channelTimeout uint64, subSafetyMargin uint64) {
 		// Create the channel builder
-		channelConfig := defaultTestChannelConfig
+		channelConfig := defaultTestChannelConfig()
 		channelConfig.ChannelTimeout = channelTimeout
 		channelConfig.SubSafetyMargin = subSafetyMargin
 		cb, err := NewChannelBuilder(channelConfig, defaultTestRollupConfig, latestL1BlockOrigin)
@@ -330,7 +239,7 @@ func FuzzSeqWindowClose(f *testing.F) {
 	}
 	f.Fuzz(func(t *testing.T, epochNum uint64, seqWindowSize uint64, subSafetyMargin uint64, timeout uint64) {
 		// Create the channel builder
-		channelConfig := defaultTestChannelConfig
+		channelConfig := defaultTestChannelConfig()
 		channelConfig.SeqWindowSize = seqWindowSize
 		channelConfig.SubSafetyMargin = subSafetyMargin
 		cb, err := NewChannelBuilder(channelConfig, defaultTestRollupConfig, latestL1BlockOrigin)
@@ -358,7 +267,7 @@ func FuzzSeqWindowZeroTimeoutClose(f *testing.F) {
 	}
 	f.Fuzz(func(t *testing.T, epochNum uint64, seqWindowSize uint64, subSafetyMargin uint64) {
 		// Create the channel builder
-		channelConfig := defaultTestChannelConfig
+		channelConfig := defaultTestChannelConfig()
 		channelConfig.SeqWindowSize = seqWindowSize
 		channelConfig.SubSafetyMargin = subSafetyMargin
 		cb, err := NewChannelBuilder(channelConfig, defaultTestRollupConfig, latestL1BlockOrigin)
@@ -404,7 +313,7 @@ func TestChannelBuilderBatchType(t *testing.T) {
 
 // TestChannelBuilder_NextFrame tests calling NextFrame on a ChannelBuilder with only one frame
 func TestChannelBuilder_NextFrame(t *testing.T) {
-	channelConfig := defaultTestChannelConfig
+	channelConfig := defaultTestChannelConfig()
 
 	// Create a new channel builder
 	cb, err := NewChannelBuilder(channelConfig, defaultTestRollupConfig, latestL1BlockOrigin)
@@ -444,7 +353,7 @@ func TestChannelBuilder_NextFrame(t *testing.T) {
 
 // TestChannelBuilder_OutputWrongFramePanic tests that a panic is thrown when a frame is pushed with an invalid frame id
 func TestChannelBuilder_OutputWrongFramePanic(t *testing.T) {
-	channelConfig := defaultTestChannelConfig
+	channelConfig := defaultTestChannelConfig()
 
 	// Construct a channel builder
 	cb, err := NewChannelBuilder(channelConfig, defaultTestRollupConfig, latestL1BlockOrigin)
@@ -474,10 +383,12 @@ func TestChannelBuilder_OutputWrongFramePanic(t *testing.T) {
 	})
 }
 
-// TestChannelBuilder_OutputFramesWorks tests the [ChannelBuilder] OutputFrames is successful.
-func TestChannelBuilder_OutputFramesWorks(t *testing.T) {
-	channelConfig := defaultTestChannelConfig
-	channelConfig.MaxFrameSize = 24
+// TestChannelBuilder_OutputFrames tests [ChannelBuilder.OutputFrames] for singular batches.
+func TestChannelBuilder_OutputFrames(t *testing.T) {
+	channelConfig := defaultTestChannelConfig()
+	channelConfig.MaxFrameSize = derive.FrameV0OverHeadSize + 1
+	channelConfig.TargetNumFrames = 1000
+	channelConfig.InitNoneCompressor()
 
 	// Construct the channel builder
 	cb, err := NewChannelBuilder(channelConfig, defaultTestRollupConfig, latestL1BlockOrigin)
@@ -494,11 +405,9 @@ func TestChannelBuilder_OutputFramesWorks(t *testing.T) {
 
 	// Let's add a block
 	require.NoError(t, addMiniBlock(cb))
-	require.NoError(t, cb.co.Flush())
 
 	// Check how many ready bytes
-	// There should be more than the max frame size ready
-	require.Greater(t, uint64(cb.co.ReadyBytes()), channelConfig.MaxFrameSize)
+	require.Greater(t, uint64(cb.co.ReadyBytes()+derive.FrameV0OverHeadSize), channelConfig.MaxFrameSize)
 	require.Equal(t, 0, cb.PendingFrames())
 
 	// The channel should not be full
@@ -515,12 +424,12 @@ func TestChannelBuilder_OutputFramesWorks(t *testing.T) {
 	}
 }
 
-// TestChannelBuilder_OutputFramesWorks tests the [ChannelBuilder] OutputFrames is successful.
-func TestChannelBuilder_OutputFramesWorks_SpanBatch(t *testing.T) {
-	channelConfig := defaultTestChannelConfig
-	channelConfig.MaxFrameSize = 24
-	channelConfig.CompressorConfig.TargetFrameSize = 50
+func TestChannelBuilder_OutputFrames_SpanBatch(t *testing.T) {
+	channelConfig := defaultTestChannelConfig()
+	channelConfig.MaxFrameSize = 20 + derive.FrameV0OverHeadSize
+	channelConfig.TargetNumFrames = 5
 	channelConfig.BatchType = derive.SpanBatchType
+	channelConfig.InitRatioCompressor(1)
 
 	// Construct the channel builder
 	cb, err := NewChannelBuilder(channelConfig, defaultTestRollupConfig, latestL1BlockOrigin)
@@ -550,14 +459,15 @@ func TestChannelBuilder_OutputFramesWorks_SpanBatch(t *testing.T) {
 
 	require.True(t, cb.IsFull())
 	// Check how many ready bytes
-	// There should be more than the max frame size ready
-	require.Greater(t, uint64(cb.co.ReadyBytes()), channelConfig.MaxFrameSize)
+	require.GreaterOrEqual(t,
+		cb.co.ReadyBytes()+derive.FrameV0OverHeadSize,
+		int(channelConfig.MaxFrameSize))
 	require.Equal(t, 0, cb.PendingFrames())
 
 	// We should be able to output the frames
 	require.NoError(t, cb.OutputFrames())
 
-	// There should be many frames in the channel builder now
+	// There should be several frames in the channel builder now
 	require.Greater(t, cb.PendingFrames(), 1)
 	for i := 0; i < cb.numFrames-1; i++ {
 		require.Len(t, cb.frames[i].data, int(channelConfig.MaxFrameSize))
@@ -569,10 +479,9 @@ func TestChannelBuilder_OutputFramesWorks_SpanBatch(t *testing.T) {
 // function errors when the max RLP bytes per channel is reached.
 func ChannelBuilder_MaxRLPBytesPerChannel(t *testing.T, batchType uint) {
 	t.Parallel()
-	channelConfig := defaultTestChannelConfig
+	channelConfig := defaultTestChannelConfig()
 	channelConfig.MaxFrameSize = derive.MaxRLPBytesPerChannel * 2
-	channelConfig.CompressorConfig.TargetFrameSize = derive.MaxRLPBytesPerChannel * 2
-	channelConfig.CompressorConfig.ApproxComprRatio = 1
+	channelConfig.InitNoneCompressor()
 	channelConfig.BatchType = batchType
 
 	// Construct the channel builder
@@ -587,11 +496,10 @@ func ChannelBuilder_MaxRLPBytesPerChannel(t *testing.T, batchType uint) {
 // ChannelBuilder_OutputFramesMaxFrameIndex tests the [ChannelBuilder.OutputFrames]
 // function errors when the max frame index is reached.
 func ChannelBuilder_OutputFramesMaxFrameIndex(t *testing.T, batchType uint) {
-	channelConfig := defaultTestChannelConfig
-	channelConfig.MaxFrameSize = 24
-	channelConfig.CompressorConfig.TargetNumFrames = 6000
-	channelConfig.CompressorConfig.TargetFrameSize = 24
-	channelConfig.CompressorConfig.ApproxComprRatio = 1
+	channelConfig := defaultTestChannelConfig()
+	channelConfig.MaxFrameSize = derive.FrameV0OverHeadSize + 1
+	channelConfig.TargetNumFrames = math.MaxUint16 + 1
+	channelConfig.InitRatioCompressor(.1)
 	channelConfig.BatchType = batchType
 
 	rng := rand.New(rand.NewSource(123))
@@ -604,7 +512,7 @@ func ChannelBuilder_OutputFramesMaxFrameIndex(t *testing.T, batchType uint) {
 	require.False(t, cb.IsFull())
 	require.Equal(t, 0, cb.PendingFrames())
 	for {
-		a := dtest.RandomL2BlockWithChainId(rng, 1, defaultTestRollupConfig.L2ChainID)
+		a := dtest.RandomL2BlockWithChainId(rng, 1000, defaultTestRollupConfig.L2ChainID)
 		_, err = cb.AddBlock(a)
 		if cb.IsFull() {
 			fullErr := cb.FullErr()
@@ -618,18 +526,52 @@ func ChannelBuilder_OutputFramesMaxFrameIndex(t *testing.T, batchType uint) {
 	require.ErrorIs(t, cb.FullErr(), ErrMaxFrameIndex)
 }
 
-// ChannelBuilder_AddBlock tests the AddBlock function
+// TestChannelBuilder_FullShadowCompressor is a regression test testing that
+// the shadow compressor is correctly marked as full if adding another block
+// would produce a leftover frame.
+//
+// This test fails in multiple places if the subtraction of
+// [derive.FrameV0OverHeadSize] in [MaxDataSize] is omitted, which has been the
+// case before it got fixed it #9887.
+func TestChannelBuilder_FullShadowCompressor(t *testing.T) {
+	require := require.New(t)
+	cfg := ChannelConfig{
+		MaxFrameSize:    752,
+		TargetNumFrames: 1,
+		BatchType:       derive.SpanBatchType,
+	}
+	cfg.InitShadowCompressor()
+
+	cb, err := NewChannelBuilder(cfg, defaultTestRollupConfig, latestL1BlockOrigin)
+	require.NoError(err)
+
+	rng := rand.New(rand.NewSource(420))
+	a := dtest.RandomL2BlockWithChainId(rng, 1, defaultTestRollupConfig.L2ChainID)
+	_, err = cb.AddBlock(a)
+	require.NoError(err)
+	_, err = cb.AddBlock(a)
+	require.ErrorIs(err, derive.CompressorFullErr)
+	// without fix, adding the second block would succeed and then adding a
+	// third block would fail with full error and the compressor would be full.
+
+	require.NoError(cb.OutputFrames())
+
+	require.True(cb.HasFrame())
+	f := cb.NextFrame()
+	require.Less(len(f.data), int(cfg.MaxFrameSize)) // would fail without fix, full frame
+
+	require.False(cb.HasFrame(), "no leftover frame expected") // would fail without fix
+}
+
 func ChannelBuilder_AddBlock(t *testing.T, batchType uint) {
-	channelConfig := defaultTestChannelConfig
+	channelConfig := defaultTestChannelConfig()
 	channelConfig.BatchType = batchType
 
 	// Lower the max frame size so that we can batch
-	channelConfig.MaxFrameSize = 20
-
+	channelConfig.MaxFrameSize = 20 + derive.FrameV0OverHeadSize
+	channelConfig.TargetNumFrames = 2
 	// Configure the Input Threshold params so we observe a full channel
-	channelConfig.CompressorConfig.TargetFrameSize = 20
-	channelConfig.CompressorConfig.TargetNumFrames = 2
-	channelConfig.CompressorConfig.ApproxComprRatio = 1
+	channelConfig.InitRatioCompressor(1)
 
 	// Construct the channel builder
 	cb, err := NewChannelBuilder(channelConfig, defaultTestRollupConfig, latestL1BlockOrigin)
@@ -654,9 +596,8 @@ func ChannelBuilder_AddBlock(t *testing.T, batchType uint) {
 	require.ErrorIs(t, addMiniBlock(cb), derive.CompressorFullErr)
 }
 
-// TestBuilderRegisterL1Block tests the CheckTimeout function
-func TestBuilder_CheckTimeout(t *testing.T) {
-	channelConfig := defaultTestChannelConfig
+func TestChannelBuilder_CheckTimeout(t *testing.T) {
+	channelConfig := defaultTestChannelConfig()
 
 	// Construct the channel builder
 	cb, err := NewChannelBuilder(channelConfig, defaultTestRollupConfig, latestL1BlockOrigin)
@@ -677,9 +618,8 @@ func TestBuilder_CheckTimeout(t *testing.T) {
 	require.ErrorIs(t, cb.FullErr(), ErrMaxDurationReached)
 }
 
-// TestBuilder_CheckTimeoutZeroMaxChannelDuration tests the CheckTimeout function
-func TestBuilder_CheckTimeoutZeroMaxChannelDuration(t *testing.T) {
-	channelConfig := defaultTestChannelConfig
+func TestChannelBuilder_CheckTimeoutZeroMaxChannelDuration(t *testing.T) {
+	channelConfig := defaultTestChannelConfig()
 
 	// Set the max channel duration to 0
 	channelConfig.MaxChannelDuration = 0
@@ -701,11 +641,8 @@ func TestBuilder_CheckTimeoutZeroMaxChannelDuration(t *testing.T) {
 	require.Equal(t, uint64(0), cb.timeout)
 }
 
-// TestFramePublished tests the FramePublished function
-func TestFramePublished(t *testing.T) {
-	channelConfig := defaultTestChannelConfig
-
-	cfg := channelConfig
+func TestChannelBuilder_FramePublished(t *testing.T) {
+	cfg := defaultTestChannelConfig()
 	cfg.MaxChannelDuration = 10_000
 	cfg.ChannelTimeout = 1000
 	cfg.SubSafetyMargin = 100
@@ -728,7 +665,7 @@ func TestFramePublished(t *testing.T) {
 }
 
 func TestChannelBuilder_LatestL1Origin(t *testing.T) {
-	cb, err := NewChannelBuilder(defaultTestChannelConfig, defaultTestRollupConfig, latestL1BlockOrigin)
+	cb, err := NewChannelBuilder(defaultTestChannelConfig(), defaultTestRollupConfig, latestL1BlockOrigin)
 	require.NoError(t, err)
 	require.Equal(t, eth.BlockID{}, cb.LatestL1Origin())
 
@@ -753,12 +690,11 @@ func ChannelBuilder_PendingFrames_TotalFrames(t *testing.T, batchType uint) {
 	const tnf = 9
 	rng := rand.New(rand.NewSource(94572314))
 	require := require.New(t)
-	cfg := defaultTestChannelConfig
-	cfg.CompressorConfig.TargetFrameSize = 1000
+	cfg := defaultTestChannelConfig()
 	cfg.MaxFrameSize = 1000
-	cfg.CompressorConfig.TargetNumFrames = tnf
-	cfg.CompressorConfig.Kind = "shadow"
+	cfg.TargetNumFrames = tnf
 	cfg.BatchType = batchType
+	cfg.InitShadowCompressor()
 	cb, err := NewChannelBuilder(cfg, defaultTestRollupConfig, latestL1BlockOrigin)
 	require.NoError(err)
 
@@ -796,7 +732,7 @@ func ChannelBuilder_PendingFrames_TotalFrames(t *testing.T, batchType uint) {
 func ChannelBuilder_InputBytes(t *testing.T, batchType uint) {
 	require := require.New(t)
 	rng := rand.New(rand.NewSource(4982432))
-	cfg := defaultTestChannelConfig
+	cfg := defaultTestChannelConfig()
 	cfg.BatchType = batchType
 	var spanBatchBuilder *derive.SpanBatchBuilder
 	if batchType == derive.SpanBatchType {
@@ -833,12 +769,11 @@ func ChannelBuilder_InputBytes(t *testing.T, batchType uint) {
 func ChannelBuilder_OutputBytes(t *testing.T, batchType uint) {
 	require := require.New(t)
 	rng := rand.New(rand.NewSource(9860372))
-	cfg := defaultTestChannelConfig
-	cfg.CompressorConfig.TargetFrameSize = 1000
+	cfg := defaultTestChannelConfig()
 	cfg.MaxFrameSize = 1000
-	cfg.CompressorConfig.TargetNumFrames = 16
-	cfg.CompressorConfig.ApproxComprRatio = 1.0
+	cfg.TargetNumFrames = 16
 	cfg.BatchType = batchType
+	cfg.InitRatioCompressor(1.0)
 	cb, err := NewChannelBuilder(cfg, defaultTestRollupConfig, latestL1BlockOrigin)
 	require.NoError(err, "NewChannelBuilder")
 

op-batcher/batcher/channel_config.go

+package batcher
+
+import (
+	"fmt"
+
+	"github.com/ethereum-optimism/optimism/op-batcher/compressor"
+	"github.com/ethereum-optimism/optimism/op-node/rollup/derive"
+)
+
+type ChannelConfig struct {
+	// Number of epochs (L1 blocks) per sequencing window, including the epoch
+	// L1 origin block itself
+	SeqWindowSize uint64
+	// The maximum number of L1 blocks that the inclusion transactions of a
+	// channel's frames can span.
+	ChannelTimeout uint64
+
+	// Builder Config
+
+	// MaxChannelDuration is the maximum duration (in #L1-blocks) to keep the
+	// channel open. This allows control over how long a channel is kept open
+	// during times of low transaction volume.
+	//
+	// If 0, duration checks are disabled.
+	MaxChannelDuration uint64
+	// The batcher tx submission safety margin (in #L1-blocks) to subtract from
+	// a channel's timeout and sequencing window, to guarantee safe inclusion of
+	// a channel on L1.
+	SubSafetyMargin uint64
+	// The maximum byte-size a frame can have.
+	MaxFrameSize uint64
+
+	// Target number of frames to create per channel.
+	// For blob transactions, this controls the number of blobs to target adding
+	// to each blob tx.
+	TargetNumFrames int
+
+	// CompressorConfig contains the configuration for creating new compressors.
+	// It should not be set directly, but via the Init*Compressor methods after
+	// creating the ChannelConfig to guarantee a consistent configuration.
+	CompressorConfig compressor.Config
+
+	// BatchType indicates whether the channel uses SingularBatch or SpanBatch.
+	BatchType uint
+
+	// Whether to put all frames of a channel inside a single tx.
+	// Should only be used for blob transactions.
+	MultiFrameTxs bool
+}
+
+// InitCompressorConfig (re)initializes the channel configuration's compressor
+// configuration using the given values. The TargetOutputSize will be set to a
+// value consistent with cc.TargetNumFrames and cc.MaxFrameSize.
+// comprKind can be the empty string, in which case the default compressor will
+// be used.
+func (cc *ChannelConfig) InitCompressorConfig(approxComprRatio float64, comprKind string) {
+	cc.CompressorConfig = compressor.Config{
+		// Compressor output size needs to account for frame encoding overhead
+		TargetOutputSize: MaxDataSize(cc.TargetNumFrames, cc.MaxFrameSize),
+		ApproxComprRatio: approxComprRatio,
+		Kind:             comprKind,
+	}
+}
+
+func (cc *ChannelConfig) InitRatioCompressor(approxComprRatio float64) {
+	cc.InitCompressorConfig(approxComprRatio, compressor.RatioKind)
+}
+
+func (cc *ChannelConfig) InitShadowCompressor() {
+	cc.InitCompressorConfig(0, compressor.ShadowKind)
+}
+
+func (cc *ChannelConfig) InitNoneCompressor() {
+	cc.InitCompressorConfig(0, compressor.NoneKind)
+}
+
+func (cc *ChannelConfig) MaxFramesPerTx() int {
+	if !cc.MultiFrameTxs {
+		return 1
+	}
+	return cc.TargetNumFrames
+}
+
+// Check validates the [ChannelConfig] parameters.
+func (cc *ChannelConfig) Check() error {
+	// The [ChannelTimeout] must be larger than the [SubSafetyMargin].
+	// Otherwise, new blocks would always be considered timed out.
+	if cc.ChannelTimeout < cc.SubSafetyMargin {
+		return ErrInvalidChannelTimeout
+	}
+
+	// The max frame size must at least be able to accommodate the constant
+	// frame overhead.
+	if cc.MaxFrameSize < derive.FrameV0OverHeadSize {
+		return fmt.Errorf("max frame size %d is less than the minimum %d",
+			cc.MaxFrameSize, derive.FrameV0OverHeadSize)
+	}
+
+	if cc.BatchType > derive.SpanBatchType {
+		return fmt.Errorf("unrecognized batch type: %d", cc.BatchType)
+	}
+
+	if nf := cc.TargetNumFrames; nf < 1 {
+		return fmt.Errorf("invalid number of frames %d", nf)
+	}
+
+	return nil
+}
+
+// MaxDataSize returns the maximum byte size of output data that can be packed
+// into a channel with numFrames frames and frames of max size maxFrameSize.
+// It accounts for the constant frame overhead. It panics if the maxFrameSize
+// is smaller than [derive.FrameV0OverHeadSize].
+func MaxDataSize(numFrames int, maxFrameSize uint64) uint64 {
+	if maxFrameSize < derive.FrameV0OverHeadSize {
+		panic("max frame size smaller than frame overhead")
+	}
+	return uint64(numFrames) * (maxFrameSize - derive.FrameV0OverHeadSize)
+}

op-batcher/batcher/channel_config_test.go

+package batcher
+
+import (
+	"fmt"
+	"math"
+	"testing"
+
+	"github.com/ethereum-optimism/optimism/op-node/rollup/derive"
+
+	"github.com/stretchr/testify/require"
+)
+
+func defaultTestChannelConfig() ChannelConfig {
+	c := ChannelConfig{
+		SeqWindowSize:      15,
+		ChannelTimeout:     40,
+		MaxChannelDuration: 1,
+		SubSafetyMargin:    4,
+		MaxFrameSize:       120_000,
+		TargetNumFrames:    1,
+		BatchType:          derive.SingularBatchType,
+	}
+	c.InitRatioCompressor(0.4)
+	return c
+}
+
+func TestChannelConfig_Check(t *testing.T) {
+	type test struct {
+		input     func() ChannelConfig
+		assertion func(error)
+	}
+
+	tests := []test{
+		{
+			input: defaultTestChannelConfig,
+			assertion: func(output error) {
+				require.NoError(t, output)
+			},
+		},
+		{
+			input: func() ChannelConfig {
+				cfg := defaultTestChannelConfig()
+				cfg.ChannelTimeout = 0
+				cfg.SubSafetyMargin = 1
+				return cfg
+			},
+			assertion: func(output error) {
+				require.ErrorIs(t, output, ErrInvalidChannelTimeout)
+			},
+		},
+	}
+	for i := 0; i < derive.FrameV0OverHeadSize; i++ {
+		expectedErr := fmt.Sprintf("max frame size %d is less than the minimum 23", i)
+		i := i // need to udpate Go version...
+		tests = append(tests, test{
+			input: func() ChannelConfig {
+				cfg := defaultTestChannelConfig()
+				cfg.MaxFrameSize = uint64(i)
+				return cfg
+			},
+			assertion: func(output error) {
+				require.EqualError(t, output, expectedErr)
+			},
+		})
+	}
+
+	// Run the table tests
+	for _, test := range tests {
+		cfg := test.input()
+		test.assertion(cfg.Check())
+	}
+}
+
+// FuzzChannelConfig_CheckTimeout tests the [ChannelConfig.Check] function
+// with fuzzing to make sure that a [ErrInvalidChannelTimeout] is thrown when
+// the ChannelTimeout is less than the SubSafetyMargin.
+func FuzzChannelConfig_CheckTimeout(f *testing.F) {
+	for i := range [10]int{} {
+		f.Add(uint64(i+1), uint64(i))
+	}
+	f.Fuzz(func(t *testing.T, channelTimeout uint64, subSafetyMargin uint64) {
+		// We only test where [ChannelTimeout] is less than the [SubSafetyMargin]
+		// So we cannot have [ChannelTimeout] be [math.MaxUint64]
+		if channelTimeout == math.MaxUint64 {
+			channelTimeout = math.MaxUint64 - 1
+		}
+		if subSafetyMargin <= channelTimeout {
+			subSafetyMargin = channelTimeout + 1
+		}
+
+		channelConfig := defaultTestChannelConfig()
+		channelConfig.ChannelTimeout = channelTimeout
+		channelConfig.SubSafetyMargin = subSafetyMargin
+		require.ErrorIs(t, channelConfig.Check(), ErrInvalidChannelTimeout)
+	})
+}

op-batcher/batcher/channel_manager_test.go

@@ -7,7 +7,6 @@ import (
 	"testing"
 	"time"
 
-	"github.com/ethereum-optimism/optimism/op-batcher/compressor"
 	"github.com/ethereum-optimism/optimism/op-batcher/metrics"
 	"github.com/ethereum-optimism/optimism/op-node/rollup"
 	"github.com/ethereum-optimism/optimism/op-node/rollup/derive"
@@ -20,6 +19,16 @@ import (
 	"github.com/stretchr/testify/require"
 )
 
+func channelManagerTestConfig(maxFrameSize uint64, batchType uint) ChannelConfig {
+	cfg := ChannelConfig{
+		MaxFrameSize:    maxFrameSize,
+		TargetNumFrames: 1,
+		BatchType:       batchType,
+	}
+	cfg.InitRatioCompressor(1)
+	return cfg
+}
+
 func TestChannelManagerBatchType(t *testing.T) {
 	tests := []struct {
 		name string
@@ -84,18 +93,9 @@ func ChannelManagerReturnsErrReorg(t *testing.T, batchType uint) {
 // detects a reorg even if it does not have any blocks inside it.
 func ChannelManagerReturnsErrReorgWhenDrained(t *testing.T, batchType uint) {
 	log := testlog.Logger(t, log.LevelCrit)
-	m := NewChannelManager(log, metrics.NoopMetrics,
-		ChannelConfig{
-			MaxFrameSize: 120_000,
-			CompressorConfig: compressor.Config{
-				TargetFrameSize:  1,
-				TargetNumFrames:  1,
-				ApproxComprRatio: 1.0,
-			},
-			BatchType: batchType,
-		},
-		&rollup.Config{},
-	)
+	cfg := channelManagerTestConfig(120_000, batchType)
+	cfg.CompressorConfig.TargetOutputSize = 1 // full on first block
+	m := NewChannelManager(log, metrics.NoopMetrics, cfg, &rollup.Config{})
 	m.Clear(eth.BlockID{})
 
 	a := newMiniL2Block(0)
@@ -118,23 +118,13 @@ func ChannelManager_Clear(t *testing.T, batchType uint) {
 	// Create a channel manager
 	log := testlog.Logger(t, log.LevelCrit)
 	rng := rand.New(rand.NewSource(time.Now().UnixNano()))
-	m := NewChannelManager(log, metrics.NoopMetrics, ChannelConfig{
+	cfg := channelManagerTestConfig(derive.FrameV0OverHeadSize+1, batchType)
 	// Need to set the channel timeout here so we don't clear pending
 	// channels on confirmation. This would result in [TxConfirmed]
 	// clearing confirmed transactions, and resetting the pendingChannels map
-		ChannelTimeout: 10,
-		// Have to set the max frame size here otherwise the channel builder would not
-		// be able to output any frames
-		MaxFrameSize: 24,
-		CompressorConfig: compressor.Config{
-			TargetFrameSize:  24,
-			TargetNumFrames:  1,
-			ApproxComprRatio: 1.0,
-		},
-		BatchType: batchType,
-	},
-		&defaultTestRollupConfig,
-	)
+	cfg.ChannelTimeout = 10
+	cfg.InitRatioCompressor(1)
+	m := NewChannelManager(log, metrics.NoopMetrics, cfg, &defaultTestRollupConfig)
 
 	// Channel Manager state should be empty by default
 	require.Empty(m.blocks)
@@ -203,18 +193,9 @@ func ChannelManager_TxResend(t *testing.T, batchType uint) {
 	require := require.New(t)
 	rng := rand.New(rand.NewSource(time.Now().UnixNano()))
 	log := testlog.Logger(t, log.LevelError)
-	m := NewChannelManager(log, metrics.NoopMetrics,
-		ChannelConfig{
-			MaxFrameSize: 120_000,
-			CompressorConfig: compressor.Config{
-				TargetFrameSize:  1,
-				TargetNumFrames:  1,
-				ApproxComprRatio: 1.0,
-			},
-			BatchType: batchType,
-		},
-		&defaultTestRollupConfig,
-	)
+	cfg := channelManagerTestConfig(120_000, batchType)
+	cfg.CompressorConfig.TargetOutputSize = 1 // full on first block
+	m := NewChannelManager(log, metrics.NoopMetrics, cfg, &defaultTestRollupConfig)
 	m.Clear(eth.BlockID{})
 
 	a := derivetest.RandomL2BlockWithChainId(rng, 4, defaultTestRollupConfig.L2ChainID)
@@ -252,15 +233,7 @@ func ChannelManagerCloseBeforeFirstUse(t *testing.T, batchType uint) {
 	rng := rand.New(rand.NewSource(time.Now().UnixNano()))
 	log := testlog.Logger(t, log.LevelCrit)
 	m := NewChannelManager(log, metrics.NoopMetrics,
-		ChannelConfig{
-			MaxFrameSize:   100,
-			ChannelTimeout: 1000,
-			CompressorConfig: compressor.Config{
-				TargetFrameSize:  0,
-				ApproxComprRatio: 1.0,
-			},
-			BatchType: batchType,
-		},
+		channelManagerTestConfig(10000, batchType),
 		&defaultTestRollupConfig,
 	)
 	m.Clear(eth.BlockID{})
@@ -282,19 +255,10 @@ func ChannelManagerCloseBeforeFirstUse(t *testing.T, batchType uint) {
 func ChannelManagerCloseNoPendingChannel(t *testing.T, batchType uint) {
 	require := require.New(t)
 	log := testlog.Logger(t, log.LevelCrit)
-	m := NewChannelManager(log, metrics.NoopMetrics,
-		ChannelConfig{
-			MaxFrameSize:   100,
-			ChannelTimeout: 1000,
-			CompressorConfig: compressor.Config{
-				TargetFrameSize:  1,
-				TargetNumFrames:  1,
-				ApproxComprRatio: 1.0,
-			},
-			BatchType: batchType,
-		},
-		&defaultTestRollupConfig,
-	)
+	cfg := channelManagerTestConfig(10000, batchType)
+	cfg.CompressorConfig.TargetOutputSize = 1 // full on first block
+	cfg.ChannelTimeout = 1000
+	m := NewChannelManager(log, metrics.NoopMetrics, cfg, &defaultTestRollupConfig)
 	m.Clear(eth.BlockID{})
 	a := newMiniL2Block(0)
 	b := newMiniL2BlockWithNumberParent(0, big.NewInt(1), a.Hash())
@@ -328,19 +292,9 @@ func ChannelManagerClosePendingChannel(t *testing.T, batchType uint) {
 	// Example of different RNG seed that creates less than 2 frames: 1698700588902821588
 	rng := rand.New(rand.NewSource(123))
 	log := testlog.Logger(t, log.LevelError)
-	m := NewChannelManager(log, metrics.NoopMetrics,
-		ChannelConfig{
-			MaxFrameSize:   10_000,
-			ChannelTimeout: 1_000,
-			CompressorConfig: compressor.Config{
-				TargetNumFrames:  1,
-				TargetFrameSize:  10_000,
-				ApproxComprRatio: 1.0,
-			},
-			BatchType: batchType,
-		},
-		&defaultTestRollupConfig,
-	)
+	cfg := channelManagerTestConfig(10_000, batchType)
+	cfg.ChannelTimeout = 1000
+	m := NewChannelManager(log, metrics.NoopMetrics, cfg, &defaultTestRollupConfig)
 	m.Clear(eth.BlockID{})
 
 	numTx := 20 // Adjust number of txs to make 2 frames
@@ -386,20 +340,13 @@ func TestChannelManager_Close_PartiallyPendingChannel(t *testing.T) {
 	// Example of different RNG seed that creates less than 2 frames: 1698700588902821588
 	rng := rand.New(rand.NewSource(123))
 	log := testlog.Logger(t, log.LevelError)
-	const framesize = 2200
-	m := NewChannelManager(log, metrics.NoopMetrics,
-		ChannelConfig{
-			MaxFrameSize:   framesize,
+	cfg := ChannelConfig{
+		MaxFrameSize:    2200,
 		ChannelTimeout:  1000,
-			CompressorConfig: compressor.Config{
 		TargetNumFrames: 100,
-				TargetFrameSize:  framesize,
-				ApproxComprRatio: 1.0,
-				Kind:             "none",
-			},
-		},
-		&defaultTestRollupConfig,
-	)
+	}
+	cfg.InitNoneCompressor()
+	m := NewChannelManager(log, metrics.NoopMetrics, cfg, &defaultTestRollupConfig)
 	m.Clear(eth.BlockID{})
 
 	numTx := 3 // Adjust number of txs to make 2 frames
@@ -446,38 +393,46 @@ func TestChannelManager_Close_PartiallyPendingChannel(t *testing.T) {
 // have successfully landed on chain.
 func ChannelManagerCloseAllTxsFailed(t *testing.T, batchType uint) {
 	require := require.New(t)
-	rng := rand.New(rand.NewSource(time.Now().UnixNano()))
+	rng := rand.New(rand.NewSource(1357))
 	log := testlog.Logger(t, log.LevelCrit)
-	m := NewChannelManager(log, metrics.NoopMetrics,
-		ChannelConfig{
-			MaxFrameSize:   1000,
-			ChannelTimeout: 1000,
-			CompressorConfig: compressor.Config{
-				TargetNumFrames:  100,
-				TargetFrameSize:  1000,
-				ApproxComprRatio: 1.0,
-			},
-			BatchType: batchType,
-		}, &defaultTestRollupConfig,
-	)
+	cfg := channelManagerTestConfig(100, batchType)
+	cfg.TargetNumFrames = 1000
+	cfg.InitNoneCompressor()
+	m := NewChannelManager(log, metrics.NoopMetrics, cfg, &defaultTestRollupConfig)
 	m.Clear(eth.BlockID{})
 
-	a := derivetest.RandomL2BlockWithChainId(rng, 50000, defaultTestRollupConfig.L2ChainID)
+	a := derivetest.RandomL2BlockWithChainId(rng, 1000, defaultTestRollupConfig.L2ChainID)
 
 	err := m.AddL2Block(a)
 	require.NoError(err, "Failed to add L2 block")
 
+	drainTxData := func() (txdatas []txData) {
+		for {
 			txdata, err := m.TxData(eth.BlockID{})
+			if err == io.EOF {
+				return
+			}
 			require.NoError(err, "Expected channel manager to produce valid tx data")
+			txdatas = append(txdatas, txdata)
+		}
+	}
 
+	txdatas := drainTxData()
+	require.NotEmpty(txdatas)
+
+	for _, txdata := range txdatas {
 		m.TxFailed(txdata.ID())
+	}
 
 	// Show that this data will continue to be emitted as long as the transaction
 	// fails and the channel manager is not closed
-	txdata, err = m.TxData(eth.BlockID{})
-	require.NoError(err, "Expected channel manager to re-attempt the failed transaction")
+	txdatas1 := drainTxData()
+	require.NotEmpty(txdatas)
+	require.ElementsMatch(txdatas, txdatas1, "expected same txdatas on re-attempt")
 
+	for _, txdata := range txdatas1 {
 		m.TxFailed(txdata.ID())
+	}
 
 	require.NoError(m.Close(), "Expected to close channel manager gracefully")
 
@@ -487,16 +442,10 @@ func ChannelManagerCloseAllTxsFailed(t *testing.T, batchType uint) {
 
 func TestChannelManager_ChannelCreation(t *testing.T) {
 	l := testlog.Logger(t, log.LevelCrit)
-	maxChannelDuration := uint64(15)
-	cfg := ChannelConfig{
-		MaxChannelDuration: maxChannelDuration,
-		MaxFrameSize:       1000,
-		CompressorConfig: compressor.Config{
-			TargetNumFrames:  100,
-			TargetFrameSize:  1000,
-			ApproxComprRatio: 1.0,
-		},
-	}
+	const maxChannelDuration = 15
+	cfg := channelManagerTestConfig(1000, derive.SpanBatchType)
+	cfg.MaxChannelDuration = maxChannelDuration
+	cfg.InitNoneCompressor()
 
 	for _, tt := range []struct {
 		name                   string

op-batcher/batcher/channel_test.go

@@ -4,7 +4,6 @@ import (
 	"io"
 	"testing"
 
-	"github.com/ethereum-optimism/optimism/op-batcher/compressor"
 	"github.com/ethereum-optimism/optimism/op-batcher/metrics"
 	"github.com/ethereum-optimism/optimism/op-node/rollup"
 	"github.com/ethereum-optimism/optimism/op-node/rollup/derive"
@@ -118,9 +117,7 @@ func TestChannel_NextTxData_singleFrameTx(t *testing.T) {
 	lgr := testlog.Logger(t, log.LevelWarn)
 	ch, err := newChannel(lgr, metrics.NoopMetrics, ChannelConfig{
 		MultiFrameTxs:   false,
-		CompressorConfig: compressor.Config{
 		TargetNumFrames: n,
-		},
 	}, &rollup.Config{}, latestL1BlockOrigin)
 	require.NoError(err)
 	chID := ch.ID()
@@ -158,9 +155,7 @@ func TestChannel_NextTxData_multiFrameTx(t *testing.T) {
 	lgr := testlog.Logger(t, log.LevelWarn)
 	ch, err := newChannel(lgr, metrics.NoopMetrics, ChannelConfig{
 		MultiFrameTxs:   true,
-		CompressorConfig: compressor.Config{
 		TargetNumFrames: n,
-		},
 	}, &rollup.Config{}, latestL1BlockOrigin)
 	require.NoError(err)
 	chID := ch.ID()

op-batcher/batcher/config.go

@@ -55,6 +55,18 @@ type CLIConfig struct {
 	// If using blobs, this setting is ignored and the max blob size is used.
 	MaxL1TxSize uint64
 
+	// The target number of frames to create per channel. Controls number of blobs
+	// per blob tx, if using Blob DA.
+	TargetNumFrames int
+
+	// ApproxComprRatio to assume (only [compressor.RatioCompressor]).
+	// Should be slightly smaller than average from experiments to avoid the
+	// chances of creating a small additional leftover frame.
+	ApproxComprRatio float64
+
+	// Type of compressor to use. Must be one of [compressor.KindKeys].
+	Compressor string
+
 	Stopped bool
 
 	BatchType uint
@@ -74,7 +86,6 @@ type CLIConfig struct {
 	LogConfig     oplog.CLIConfig
 	MetricsConfig opmetrics.CLIConfig
 	PprofConfig   oppprof.CLIConfig
-	CompressorConfig compressor.CLIConfig
 	RPC           oprpc.CLIConfig
 	PlasmaDA      plasma.CLIConfig
 }
@@ -98,13 +109,16 @@ func (c *CLIConfig) Check() error {
 	if c.MaxL1TxSize <= 1 {
 		return errors.New("MaxL1TxSize must be greater than 1")
 	}
-	if target, max := c.CompressorConfig.TargetL1TxSizeBytes, c.MaxL1TxSize; target > max {
-		return fmt.Errorf("target tx size > max, %d > %d", target, max)
+	if c.TargetNumFrames < 1 {
+		return errors.New("TargetNumFrames must be at least 1")
+	}
+	if c.Compressor == compressor.RatioKind && (c.ApproxComprRatio <= 0 || c.ApproxComprRatio > 1) {
+		return fmt.Errorf("invalid ApproxComprRatio %v for ratio compressor", c.ApproxComprRatio)
 	}
 	if c.BatchType > 1 {
 		return fmt.Errorf("unknown batch type: %v", c.BatchType)
 	}
-	if c.DataAvailabilityType == flags.BlobsType && c.CompressorConfig.TargetNumFrames > 6 {
+	if c.DataAvailabilityType == flags.BlobsType && c.TargetNumFrames > 6 {
 		return errors.New("too many frames for blob transactions, max 6")
 	}
 	if !flags.ValidDataAvailabilityType(c.DataAvailabilityType) {
@@ -139,6 +153,9 @@ func NewConfig(ctx *cli.Context) *CLIConfig {
 		MaxPendingTransactions:       ctx.Uint64(flags.MaxPendingTransactionsFlag.Name),
 		MaxChannelDuration:           ctx.Uint64(flags.MaxChannelDurationFlag.Name),
 		MaxL1TxSize:                  ctx.Uint64(flags.MaxL1TxSizeBytesFlag.Name),
+		TargetNumFrames:              ctx.Int(flags.TargetNumFramesFlag.Name),
+		ApproxComprRatio:             ctx.Float64(flags.ApproxComprRatioFlag.Name),
+		Compressor:                   ctx.String(flags.CompressorFlag.Name),
 		Stopped:                      ctx.Bool(flags.StoppedFlag.Name),
 		BatchType:                    ctx.Uint(flags.BatchTypeFlag.Name),
 		DataAvailabilityType:         flags.DataAvailabilityType(ctx.String(flags.DataAvailabilityTypeFlag.Name)),
@@ -147,7 +164,6 @@ func NewConfig(ctx *cli.Context) *CLIConfig {
 		LogConfig:                    oplog.ReadCLIConfig(ctx),
 		MetricsConfig:                opmetrics.ReadCLIConfig(ctx),
 		PprofConfig:                  oppprof.ReadCLIConfig(ctx),
-		CompressorConfig:             compressor.ReadCLIConfig(ctx),
 		RPC:                          oprpc.ReadCLIConfig(ctx),
 		PlasmaDA:                     plasma.ReadCLIConfig(ctx),
 	}

op-batcher/batcher/config_test.go

@@ -5,6 +5,7 @@ import (
 	"time"
 
 	"github.com/ethereum-optimism/optimism/op-batcher/batcher"
+	"github.com/ethereum-optimism/optimism/op-batcher/compressor"
 	"github.com/ethereum-optimism/optimism/op-batcher/flags"
 	"github.com/ethereum-optimism/optimism/op-service/log"
 	"github.com/ethereum-optimism/optimism/op-service/metrics"
@@ -24,6 +25,8 @@ func validBatcherConfig() batcher.CLIConfig {
 		PollInterval:           time.Second,
 		MaxPendingTransactions: 0,
 		MaxL1TxSize:            10,
+		TargetNumFrames:        1,
+		Compressor:             "shadow",
 		Stopped:                false,
 		BatchType:              0,
 		DataAvailabilityType:   flags.CalldataType,
@@ -87,6 +90,27 @@ func TestBatcherConfig(t *testing.T) {
 			override:  func(c *batcher.CLIConfig) { c.DataAvailabilityType = "foo" },
 			errString: "unknown data availability type: \"foo\"",
 		},
+		{
+			name:      "zero TargetNumFrames",
+			override:  func(c *batcher.CLIConfig) { c.TargetNumFrames = 0 },
+			errString: "TargetNumFrames must be at least 1",
+		},
+		{
+			name: "larger 6 TargetNumFrames for blobs",
+			override: func(c *batcher.CLIConfig) {
+				c.TargetNumFrames = 7
+				c.DataAvailabilityType = flags.BlobsType
+			},
+			errString: "too many frames for blob transactions, max 6",
+		},
+		{
+			name: "invalid compr ratio for ratio compressor",
+			override: func(c *batcher.CLIConfig) {
+				c.ApproxComprRatio = 4.2
+				c.Compressor = compressor.RatioKind
+			},
+			errString: "invalid ApproxComprRatio 4.2 for ratio compressor",
+		},
 	}
 
 	for _, test := range tests {

op-batcher/batcher/service.go

@@ -13,7 +13,6 @@ import (
 	"github.com/ethereum/go-ethereum/ethclient"
 	"github.com/ethereum/go-ethereum/log"
 
-	"github.com/ethereum-optimism/optimism/op-batcher/compressor"
 	"github.com/ethereum-optimism/optimism/op-batcher/flags"
 	"github.com/ethereum-optimism/optimism/op-batcher/metrics"
 	"github.com/ethereum-optimism/optimism/op-batcher/rpc"
@@ -187,22 +186,23 @@ func (bs *BatcherService) initRollupConfig(ctx context.Context) error {
 }
 
 func (bs *BatcherService) initChannelConfig(cfg *CLIConfig) error {
-	bs.ChannelConfig = ChannelConfig{
+	cc := ChannelConfig{
 		SeqWindowSize:      bs.RollupConfig.SeqWindowSize,
 		ChannelTimeout:     bs.RollupConfig.ChannelTimeout,
 		MaxChannelDuration: cfg.MaxChannelDuration,
-		MaxFrameSize:       cfg.MaxL1TxSize, // reset for blobs
+		MaxFrameSize:       cfg.MaxL1TxSize - 1, // account for version byte prefix; reset for blobs
+		TargetNumFrames:    cfg.TargetNumFrames,
 		SubSafetyMargin:    cfg.SubSafetyMargin,
-		CompressorConfig:   cfg.CompressorConfig.Config(),
 		BatchType:          cfg.BatchType,
 	}
 
 	switch cfg.DataAvailabilityType {
 	case flags.BlobsType:
 		if !cfg.TestUseMaxTxSizeForBlobs {
-			bs.ChannelConfig.MaxFrameSize = eth.MaxBlobDataSize
+			// account for version byte prefix
+			cc.MaxFrameSize = eth.MaxBlobDataSize - 1
 		}
-		bs.ChannelConfig.MultiFrameTxs = true
+		cc.MultiFrameTxs = true
 		bs.UseBlobs = true
 	case flags.CalldataType:
 		bs.UseBlobs = false
@@ -210,16 +210,11 @@ func (bs *BatcherService) initChannelConfig(cfg *CLIConfig) error {
 		return fmt.Errorf("unknown data availability type: %v", cfg.DataAvailabilityType)
 	}
 
-	if bs.UsePlasma && bs.ChannelConfig.MaxFrameSize > plasma.MaxInputSize {
-		return fmt.Errorf("max frame size %d exceeds plasma max input size %d", bs.ChannelConfig.MaxFrameSize, plasma.MaxInputSize)
+	if bs.UsePlasma && cc.MaxFrameSize > plasma.MaxInputSize {
+		return fmt.Errorf("max frame size %d exceeds plasma max input size %d", cc.MaxFrameSize, plasma.MaxInputSize)
 	}
 
-	bs.ChannelConfig.MaxFrameSize-- // subtract 1 byte for version
-
-	if bs.ChannelConfig.CompressorConfig.Kind == compressor.ShadowKind {
-		// shadow compressor guarantees to not go over target size, so can use max size
-		bs.ChannelConfig.CompressorConfig.TargetFrameSize = bs.ChannelConfig.MaxFrameSize
-	}
+	cc.InitCompressorConfig(cfg.ApproxComprRatio, cfg.Compressor)
 
 	if bs.UseBlobs && !bs.RollupConfig.IsEcotone(uint64(time.Now().Unix())) {
 		bs.Log.Error("Cannot use Blob data before Ecotone!") // log only, the batcher may not be actively running.
@@ -228,16 +223,20 @@ func (bs *BatcherService) initChannelConfig(cfg *CLIConfig) error {
 		bs.Log.Warn("Ecotone upgrade is active, but batcher is not configured to use Blobs!")
 	}
 
-	if err := bs.ChannelConfig.Check(); err != nil {
+	if err := cc.Check(); err != nil {
 		return fmt.Errorf("invalid channel configuration: %w", err)
 	}
 	bs.Log.Info("Initialized channel-config",
 		"use_blobs", bs.UseBlobs,
-		"max_frame_size", bs.ChannelConfig.MaxFrameSize,
-		"max_channel_duration", bs.ChannelConfig.MaxChannelDuration,
-		"channel_timeout", bs.ChannelConfig.ChannelTimeout,
-		"batch_type", bs.ChannelConfig.BatchType,
-		"sub_safety_margin", bs.ChannelConfig.SubSafetyMargin)
+		"use_plasma", bs.UsePlasma,
+		"max_frame_size", cc.MaxFrameSize,
+		"target_num_frames", cc.TargetNumFrames,
+		"compressor", cc.CompressorConfig.Kind,
+		"max_channel_duration", cc.MaxChannelDuration,
+		"channel_timeout", cc.ChannelTimeout,
+		"batch_type", cc.BatchType,
+		"sub_safety_margin", cc.SubSafetyMargin)
+	bs.ChannelConfig = cc
 	return nil
 }
 

op-batcher/compressor/cli.go

-package compressor
-
-import (
-	"strings"
-
-	opservice "github.com/ethereum-optimism/optimism/op-service"
-	"github.com/urfave/cli/v2"
-)
-
-const (
-	TargetL1TxSizeBytesFlagName = "target-l1-tx-size-bytes"
-	TargetNumFramesFlagName     = "target-num-frames"
-	ApproxComprRatioFlagName    = "approx-compr-ratio"
-	KindFlagName                = "compressor"
-)
-
-func CLIFlags(envPrefix string) []cli.Flag {
-	return []cli.Flag{
-		&cli.Uint64Flag{
-			Name:    TargetL1TxSizeBytesFlagName,
-			Usage:   "The target size of a batch tx submitted to L1.",
-			Value:   100_000,
-			EnvVars: opservice.PrefixEnvVar(envPrefix, "TARGET_L1_TX_SIZE_BYTES"),
-		},
-		&cli.IntFlag{
-			Name:    TargetNumFramesFlagName,
-			Usage:   "The target number of frames to create per channel",
-			Value:   1,
-			EnvVars: opservice.PrefixEnvVar(envPrefix, "TARGET_NUM_FRAMES"),
-		},
-		&cli.Float64Flag{
-			Name:    ApproxComprRatioFlagName,
-			Usage:   "The approximate compression ratio (<= 1.0)",
-			Value:   0.4,
-			EnvVars: opservice.PrefixEnvVar(envPrefix, "APPROX_COMPR_RATIO"),
-		},
-		&cli.StringFlag{
-			Name:    KindFlagName,
-			Usage:   "The type of compressor. Valid options: " + strings.Join(KindKeys, ", "),
-			EnvVars: opservice.PrefixEnvVar(envPrefix, "COMPRESSOR"),
-			Value:   ShadowKind,
-		},
-	}
-}
-
-type CLIConfig struct {
-	// TargetL1TxSizeBytes to target when creating channel frames. Note that if the
-	// realized compression ratio is worse than the approximate, more frames may
-	// actually be created. This also depends on how close the target is to the
-	// max frame size.
-	TargetL1TxSizeBytes uint64
-	// TargetNumFrames to create in this channel. If the realized compression ratio
-	// is worse than approxComprRatio, additional leftover frame(s) might get created.
-	TargetNumFrames int
-	// ApproxComprRatio to assume. Should be slightly smaller than average from
-	// experiments to avoid the chances of creating a small additional leftover frame.
-	ApproxComprRatio float64
-	// Type of compressor to use. Must be one of KindKeys.
-	Kind string
-}
-
-func (c *CLIConfig) Config() Config {
-	return Config{
-		TargetFrameSize:  c.TargetL1TxSizeBytes - 1, // subtract 1 byte for version
-		TargetNumFrames:  c.TargetNumFrames,
-		ApproxComprRatio: c.ApproxComprRatio,
-		Kind:             c.Kind,
-	}
-}
-
-func ReadCLIConfig(ctx *cli.Context) CLIConfig {
-	return CLIConfig{
-		Kind:                ctx.String(KindFlagName),
-		TargetL1TxSizeBytes: ctx.Uint64(TargetL1TxSizeBytesFlagName),
-		TargetNumFrames:     ctx.Int(TargetNumFramesFlagName),
-		ApproxComprRatio:    ctx.Float64(ApproxComprRatioFlagName),
-	}
-}

op-batcher/compressor/compressors.go

@@ -10,6 +10,10 @@ const (
 	RatioKind  = "ratio"
 	ShadowKind = "shadow"
 	NoneKind   = "none"
+
+	// CloseOverheadZlib is the number of final bytes a [zlib.Writer] call writes
+	// to the output buffer.
+	CloseOverheadZlib = 9
 )
 
 var Kinds = map[string]FactoryFunc{

op-batcher/compressor/compressors_test.go

+package compressor
+
+import (
+	"bytes"
+	"compress/zlib"
+	"io"
+	"math/rand"
+	"testing"
+
+	"github.com/stretchr/testify/require"
+)
+
+func TestCloseOverheadZlib(t *testing.T) {
+	var buf bytes.Buffer
+	z := zlib.NewWriter(&buf)
+	rng := rand.New(rand.NewSource(420))
+	_, err := io.CopyN(z, rng, 0xff)
+	require.NoError(t, err)
+
+	require.NoError(t, z.Flush())
+	fsize := buf.Len()
+	require.NoError(t, z.Close())
+	csize := buf.Len()
+	require.Equal(t, CloseOverheadZlib, csize-fsize)
+}

op-batcher/compressor/config.go

@@ -5,14 +5,13 @@ import (
 )
 
 type Config struct {
-	// TargetFrameSize to target when creating channel frames.
-	// It is guaranteed that a frame will never be larger.
-	TargetFrameSize uint64
-	// TargetNumFrames to create in this channel. If the first block that is added
-	// doesn't fit within a single frame, more frames might be created.
-	TargetNumFrames int
-	// ApproxComprRatio to assume. Should be slightly smaller than average from
-	// experiments to avoid the chances of creating a small additional leftover frame.
+	// TargetOutputSize is the target size that the compressed data should reach.
+	// The shadow compressor guarantees that the compressed data stays below
+	// this bound. The ratio compressor might go over.
+	TargetOutputSize uint64
+	// ApproxComprRatio to assume (only ratio compressor). Should be slightly smaller
+	// than average from experiments to avoid the chances of creating a small
+	// additional leftover frame.
 	ApproxComprRatio float64
 	// Kind of compressor to use. Must be one of KindKeys. If unset, NewCompressor
 	// will default to RatioKind.

op-batcher/compressor/non_compressor.go

@@ -44,7 +44,7 @@ func (t *NonCompressor) Write(p []byte) (int, error) {
 	if err != nil {
 		return 0, err
 	}
-	if uint64(t.buf.Len()) > t.config.TargetFrameSize*uint64(t.config.TargetNumFrames) {
+	if uint64(t.buf.Len()) > t.config.TargetOutputSize {
 		t.fullErr = derive.CompressorFullErr
 	}
 	return n, nil

op-batcher/compressor/non_compressor_test.go

@@ -10,8 +10,7 @@ import (
 func TestNonCompressor(t *testing.T) {
 	require := require.New(t)
 	c, err := NewNonCompressor(Config{
-		TargetFrameSize: 1000,
-		TargetNumFrames: 100,
+		TargetOutputSize: 100000,
 	})
 	require.NoError(err)
 

op-batcher/compressor/ratio_compressor.go

@@ -74,7 +74,7 @@ func (t *RatioCompressor) FullErr() error {
 // InputThreshold calculates the input data threshold in bytes from the given
 // parameters.
 func (t *RatioCompressor) InputThreshold() uint64 {
-	return uint64(float64(t.config.TargetNumFrames) * float64(t.config.TargetFrameSize) / t.config.ApproxComprRatio)
+	return uint64(float64(t.config.TargetOutputSize) / t.config.ApproxComprRatio)
 }
 
 // inputTargetReached says whether the target amount of input data has been

op-batcher/compressor/ratio_compressor_test.go

 package compressor_test
 
 import (
+	"fmt"
 	"math"
 	"testing"
 
@@ -8,106 +9,46 @@ import (
 	"github.com/stretchr/testify/require"
 )
 
-// TestInputThreshold tests the [ChannelConfig.InputThreshold]
-// function using a table-driven testing approach.
-func TestInputThreshold(t *testing.T) {
-	type testInput struct {
-		TargetFrameSize  uint64
-		TargetNumFrames  int
-		ApproxComprRatio float64
-	}
-
-	// Construct test cases that test the boundary conditions
+func TestChannelConfig_InputThreshold(t *testing.T) {
 	tests := []struct {
-		input     testInput
-		assertion func(uint64)
+		targetOutputSize  uint64
+		approxComprRatio  float64
+		expInputThreshold uint64
+		assertion         func(uint64) // optional, for more complex assertion
 	}{
 		{
-			input: testInput{
-				TargetFrameSize:  1,
-				TargetNumFrames:  1,
-				ApproxComprRatio: 0.4,
-			},
-			assertion: func(output uint64) {
-				require.Equal(t, uint64(2), output)
-			},
+			targetOutputSize:  1,
+			approxComprRatio:  0.4,
+			expInputThreshold: 2,
 		},
 		{
-			input: testInput{
-				TargetFrameSize:  1,
-				TargetNumFrames:  100000,
-				ApproxComprRatio: 0.4,
-			},
-			assertion: func(output uint64) {
-				require.Equal(t, uint64(250_000), output)
-			},
+			targetOutputSize:  1,
+			approxComprRatio:  1,
+			expInputThreshold: 1,
 		},
 		{
-			input: testInput{
-				TargetFrameSize:  1,
-				TargetNumFrames:  1,
-				ApproxComprRatio: 1,
-			},
-			assertion: func(output uint64) {
-				require.Equal(t, uint64(1), output)
-			},
+			targetOutputSize:  100_000,
+			approxComprRatio:  0.4,
+			expInputThreshold: 250_000,
 		},
 		{
-			input: testInput{
-				TargetFrameSize:  1,
-				TargetNumFrames:  1,
-				ApproxComprRatio: 2,
-			},
-			assertion: func(output uint64) {
-				require.Equal(t, uint64(0), output)
-			},
+			targetOutputSize:  1,
+			approxComprRatio:  0.4,
+			expInputThreshold: 2,
 		},
 		{
-			input: testInput{
-				TargetFrameSize:  100000,
-				TargetNumFrames:  1,
-				ApproxComprRatio: 0.4,
-			},
-			assertion: func(output uint64) {
-				require.Equal(t, uint64(250_000), output)
-			},
+			targetOutputSize:  100_000,
+			approxComprRatio:  0.4,
+			expInputThreshold: 250_000,
 		},
 		{
-			input: testInput{
-				TargetFrameSize:  1,
-				TargetNumFrames:  100000,
-				ApproxComprRatio: 0.4,
-			},
-			assertion: func(output uint64) {
-				require.Equal(t, uint64(250_000), output)
-			},
-		},
-		{
-			input: testInput{
-				TargetFrameSize:  100000,
-				TargetNumFrames:  100000,
-				ApproxComprRatio: 0.4,
-			},
-			assertion: func(output uint64) {
-				require.Equal(t, uint64(25_000_000_000), output)
-			},
+			targetOutputSize:  1,
+			approxComprRatio:  0.000001,
+			expInputThreshold: 1_000_000,
 		},
 		{
-			input: testInput{
-				TargetFrameSize:  1,
-				TargetNumFrames:  1,
-				ApproxComprRatio: 0.000001,
-			},
-			assertion: func(output uint64) {
-				require.Equal(t, uint64(1_000_000), output)
-			},
-		},
-		{
-			input: testInput{
-				TargetFrameSize:  0,
-				TargetNumFrames:  0,
-				ApproxComprRatio: 0,
-			},
+			targetOutputSize: 0,
+			approxComprRatio: 0,
 			assertion: func(output uint64) {
 				// Need to allow for NaN depending on the machine architecture
 				require.True(t, output == uint64(0) || output == uint64(math.NaN()))
@@ -116,14 +57,19 @@ func TestInputThreshold(t *testing.T) {
 	}
 
 	// Validate each test case
-	for _, tt := range tests {
+	for i, tt := range tests {
+		t.Run(fmt.Sprintf("test-%d", i), func(t *testing.T) {
 			comp, err := compressor.NewRatioCompressor(compressor.Config{
-			TargetFrameSize:  tt.input.TargetFrameSize,
-			TargetNumFrames:  tt.input.TargetNumFrames,
-			ApproxComprRatio: tt.input.ApproxComprRatio,
+				TargetOutputSize: tt.targetOutputSize,
+				ApproxComprRatio: tt.approxComprRatio,
 			})
 			require.NoError(t, err)
 			got := comp.(*compressor.RatioCompressor).InputThreshold()
+			if tt.assertion != nil {
 				tt.assertion(got)
+			} else {
+				require.Equal(t, tt.expInputThreshold, got)
+			}
+		})
 	}
 }

op-batcher/compressor/shadow_compressor.go

@@ -67,21 +67,19 @@ func (t *ShadowCompressor) Write(p []byte) (int, error) {
 		return 0, err
 	}
 	newBound := t.bound + uint64(len(p))
-	cap := t.config.TargetFrameSize * uint64(t.config.TargetNumFrames)
-	if newBound > cap {
+	if newBound > t.config.TargetOutputSize {
 		// Do not flush the buffer unless there's some chance we will be over the size limit.
 		// This reduces CPU but more importantly it makes the shadow compression ratio more
 		// closely reflect the ultimate compression ratio.
-		err = t.shadowCompress.Flush()
-		if err != nil {
+		if err = t.shadowCompress.Flush(); err != nil {
 			return 0, err
 		}
-		newBound = uint64(t.shadowBuf.Len()) + 4 // + 4 is to account for the digest written on close()
-		if newBound > cap {
+		newBound = uint64(t.shadowBuf.Len()) + CloseOverheadZlib
+		if newBound > t.config.TargetOutputSize {
 			t.fullErr = derive.CompressorFullErr
 			if t.Len() > 0 {
 				// only return an error if we've already written data to this compressor before
-				// (otherwise individual blocks over the target would never be written)
+				// (otherwise single blocks over the target would never be written)
 				return 0, t.fullErr
 			}
 		}

op-batcher/compressor/shadow_compressor_test.go

@@ -11,53 +11,47 @@ import (
 	"github.com/stretchr/testify/require"
 )
 
-var r *rand.Rand
+var r = rand.New(rand.NewSource(99))
 
-func init() {
-	r = rand.New(rand.NewSource(99))
-}
-
-func randomBytes(t *testing.T, length int) []byte {
+func randomBytes(length int) []byte {
 	b := make([]byte, length)
 	_, err := r.Read(b)
-	require.NoError(t, err)
+	// Rand.Read always returns nil error
+	if err != nil {
+		panic(err)
+	}
 	return b
 }
 
 func TestShadowCompressor(t *testing.T) {
 	tests := []struct {
 		name             string
-		targetFrameSize uint64
-		targetNumFrames int
+		targetOutputSize uint64
 		data             [][]byte
 		errs             []error
 		fullErr          error
 	}{{
 		name:             "no data",
-		targetFrameSize: 1,
-		targetNumFrames: 1,
+		targetOutputSize: 1 + derive.FrameV0OverHeadSize,
 		data:             [][]byte{},
 		errs:             []error{},
 		fullErr:          nil,
 	}, {
 		name:             "large first block",
-		targetFrameSize: 1,
-		targetNumFrames: 1,
+		targetOutputSize: 1 + derive.FrameV0OverHeadSize,
 		data:             [][]byte{bytes.Repeat([]byte{0}, 1024)},
 		errs:             []error{nil},
 		fullErr:          derive.CompressorFullErr,
 	}, {
 		name:             "large second block",
-		targetFrameSize: 1,
-		targetNumFrames: 1,
+		targetOutputSize: 1 + derive.FrameV0OverHeadSize,
 		data:             [][]byte{bytes.Repeat([]byte{0}, 512), bytes.Repeat([]byte{0}, 1024)},
 		errs:             []error{nil, derive.CompressorFullErr},
 		fullErr:          derive.CompressorFullErr,
 	}, {
 		name:             "random data",
-		targetFrameSize: 1 << 17,
-		targetNumFrames: 1,
-		data:            [][]byte{randomBytes(t, (1<<17)-1000), randomBytes(t, 512), randomBytes(t, 512)},
+		targetOutputSize: 1 << 17,
+		data:             [][]byte{randomBytes((1 << 17) - 1000), randomBytes(512), randomBytes(512)},
 		errs:             []error{nil, nil, derive.CompressorFullErr},
 		fullErr:          derive.CompressorFullErr,
 	}}
@@ -68,8 +62,7 @@ func TestShadowCompressor(t *testing.T) {
 			require.Equal(t, len(test.errs), len(test.data), "invalid test case: len(data) != len(errs)")
 
 			sc, err := NewShadowCompressor(Config{
-				TargetFrameSize: test.targetFrameSize,
-				TargetNumFrames: test.targetNumFrames,
+				TargetOutputSize: test.targetOutputSize,
 			})
 			require.NoError(t, err)
 
@@ -118,22 +111,21 @@ func TestShadowCompressor(t *testing.T) {
 // TestBoundInaccruateForLargeRandomData documents where our bounding heuristic starts to fail
 // (writing at least 128k of random data)
 func TestBoundInaccurateForLargeRandomData(t *testing.T) {
-	var sizeLimit int = 1 << 17
+	const sizeLimit = 1 << 17
 
 	sc, err := NewShadowCompressor(Config{
-		TargetFrameSize: uint64(sizeLimit + 100),
-		TargetNumFrames: 1,
+		TargetOutputSize: sizeLimit + 100,
 	})
 	require.NoError(t, err)
 
-	_, err = sc.Write(randomBytes(t, sizeLimit+1))
+	_, err = sc.Write(randomBytes(sizeLimit + 1))
 	require.NoError(t, err)
 	err = sc.Close()
 	require.NoError(t, err)
 	require.Greater(t, uint64(sc.Len()), sc.(*ShadowCompressor).bound)
 
 	sc.Reset()
-	_, err = sc.Write(randomBytes(t, sizeLimit))
+	_, err = sc.Write(randomBytes(sizeLimit))
 	require.NoError(t, err)
 	err = sc.Close()
 	require.NoError(t, err)

op-batcher/flags/flags.go

@@ -2,9 +2,11 @@ package flags
 
 import (
 	"fmt"
+	"strings"
 	"time"
 
 	"github.com/urfave/cli/v2"
+	"golang.org/x/exp/slices"
 
 	"github.com/ethereum-optimism/optimism/op-batcher/compressor"
 	plasma "github.com/ethereum-optimism/optimism/op-plasma"
@@ -69,10 +71,34 @@ var (
 	}
 	MaxL1TxSizeBytesFlag = &cli.Uint64Flag{
 		Name:    "max-l1-tx-size-bytes",
-		Usage:   "The maximum size of a batch tx submitted to L1.",
-		Value:   120_000,
+		Usage:   "The maximum size of a batch tx submitted to L1. Ignored for blobs, where max blob size will be used.",
+		Value:   120_000, // will be overwritten to max for blob da-type
 		EnvVars: prefixEnvVars("MAX_L1_TX_SIZE_BYTES"),
 	}
+	TargetNumFramesFlag = &cli.IntFlag{
+		Name:    "target-num-frames",
+		Usage:   "The target number of frames to create per channel. Controls number of blobs per blob tx, if using Blob DA.",
+		Value:   1,
+		EnvVars: prefixEnvVars("TARGET_NUM_FRAMES"),
+	}
+	ApproxComprRatioFlag = &cli.Float64Flag{
+		Name:    "approx-compr-ratio",
+		Usage:   "The approximate compression ratio (<= 1.0). Only relevant for ratio compressor.",
+		Value:   0.6,
+		EnvVars: prefixEnvVars("APPROX_COMPR_RATIO"),
+	}
+	CompressorFlag = &cli.StringFlag{
+		Name:    "compressor",
+		Usage:   "The type of compressor. Valid options: " + strings.Join(compressor.KindKeys, ", "),
+		EnvVars: prefixEnvVars("COMPRESSOR"),
+		Value:   compressor.ShadowKind,
+		Action: func(_ *cli.Context, s string) error {
+			if !slices.Contains(compressor.KindKeys, s) {
+				return fmt.Errorf("unsupported compressor: %s", s)
+			}
+			return nil
+		},
+	}
 	StoppedFlag = &cli.BoolFlag{
 		Name:    "stopped",
 		Usage:   "Initialize the batcher in a stopped state. The batcher can be started using the admin_startBatcher RPC",
@@ -83,6 +109,7 @@ var (
 		Usage:       "The batch type. 0 for SingularBatch and 1 for SpanBatch.",
 		Value:       0,
 		EnvVars:     prefixEnvVars("BATCH_TYPE"),
+		DefaultText: "singular",
 	}
 	DataAvailabilityTypeFlag = &cli.GenericFlag{
 		Name: "data-availability-type",
@@ -116,6 +143,9 @@ var optionalFlags = []cli.Flag{
 	MaxPendingTransactionsFlag,
 	MaxChannelDurationFlag,
 	MaxL1TxSizeBytesFlag,
+	TargetNumFramesFlag,
+	ApproxComprRatioFlag,
+	CompressorFlag,
 	StoppedFlag,
 	SequencerHDPathFlag,
 	BatchTypeFlag,
@@ -129,7 +159,6 @@ func init() {
 	optionalFlags = append(optionalFlags, opmetrics.CLIFlags(EnvVarPrefix)...)
 	optionalFlags = append(optionalFlags, oppprof.CLIFlags(EnvVarPrefix)...)
 	optionalFlags = append(optionalFlags, txmgr.CLIFlags(EnvVarPrefix)...)
-	optionalFlags = append(optionalFlags, compressor.CLIFlags(EnvVarPrefix)...)
 	optionalFlags = append(optionalFlags, plasma.CLIFlags(EnvVarPrefix, "")...)
 
 	Flags = append(requiredFlags, optionalFlags...)

op-e2e/actions/l2_batcher.go

@@ -19,6 +19,7 @@ import (
 	"github.com/ethereum/go-ethereum/log"
 	"github.com/ethereum/go-ethereum/params"
 
+	"github.com/ethereum-optimism/optimism/op-batcher/batcher"
 	"github.com/ethereum-optimism/optimism/op-batcher/compressor"
 	batcherFlags "github.com/ethereum-optimism/optimism/op-batcher/flags"
 	"github.com/ethereum-optimism/optimism/op-e2e/e2eutils"
@@ -189,8 +190,7 @@ func (s *L2Batcher) Buffer(t Testing) error {
 			ch, err = NewGarbageChannelOut(s.l2BatcherCfg.GarbageCfg)
 		} else {
 			c, e := compressor.NewRatioCompressor(compressor.Config{
-				TargetFrameSize:  s.l2BatcherCfg.MaxL1TxSize,
-				TargetNumFrames:  1,
+				TargetOutputSize: batcher.MaxDataSize(1, s.l2BatcherCfg.MaxL1TxSize),
 				ApproxComprRatio: 1,
 			})
 			require.NoError(t, e, "failed to create compressor")

op-e2e/actions/sync_test.go

@@ -212,8 +212,7 @@ func TestBackupUnsafe(gt *testing.T) {
 	require.Equal(t, verifier.L2Safe().Number, uint64(0))
 
 	c, e := compressor.NewRatioCompressor(compressor.Config{
-		TargetFrameSize:  128_000,
-		TargetNumFrames:  1,
+		TargetOutputSize: 128_000,
 		ApproxComprRatio: 1,
 	})
 	require.NoError(t, e)
@@ -384,8 +383,7 @@ func TestBackupUnsafeReorgForkChoiceInputError(gt *testing.T) {
 	require.Equal(t, verifier.L2Safe().Number, uint64(0))
 
 	c, e := compressor.NewRatioCompressor(compressor.Config{
-		TargetFrameSize:  128_000,
-		TargetNumFrames:  1,
+		TargetOutputSize: 128_000,
 		ApproxComprRatio: 1,
 	})
 	require.NoError(t, e)
@@ -532,8 +530,7 @@ func TestBackupUnsafeReorgForkChoiceNotInputError(gt *testing.T) {
 	require.Equal(t, verifier.L2Safe().Number, uint64(0))
 
 	c, e := compressor.NewRatioCompressor(compressor.Config{
-		TargetFrameSize:  128_000,
-		TargetNumFrames:  1,
+		TargetOutputSize: 128_000,
 		ApproxComprRatio: 1,
 	})
 	require.NoError(t, e)
@@ -870,8 +867,7 @@ func TestInvalidPayloadInSpanBatch(gt *testing.T) {
 	verifier.ActL2PipelineFull(t)
 
 	c, e := compressor.NewRatioCompressor(compressor.Config{
-		TargetFrameSize:  128_000,
-		TargetNumFrames:  1,
+		TargetOutputSize: 128_000,
 		ApproxComprRatio: 1,
 	})
 	require.NoError(t, e)
@@ -919,8 +915,7 @@ func TestInvalidPayloadInSpanBatch(gt *testing.T) {
 
 	// Create new span batch channel
 	c, e = compressor.NewRatioCompressor(compressor.Config{
-		TargetFrameSize:  128_000,
-		TargetNumFrames:  1,
+		TargetOutputSize: 128_000,
 		ApproxComprRatio: 1,
 	})
 	require.NoError(t, e)

op-e2e/sequencer_failover_setup.go

@@ -15,7 +15,6 @@ import (
 	"github.com/stretchr/testify/require"
 
 	bss "github.com/ethereum-optimism/optimism/op-batcher/batcher"
-	"github.com/ethereum-optimism/optimism/op-batcher/compressor"
 	batcherFlags "github.com/ethereum-optimism/optimism/op-batcher/flags"
 	con "github.com/ethereum-optimism/optimism/op-conductor/conductor"
 	conrpc "github.com/ethereum-optimism/optimism/op-conductor/rpc"
@@ -226,12 +225,9 @@ func setupBatcher(t *testing.T, sys *System, conductors map[string]*conductor) {
 		RollupRpc:              rollupRpc,
 		MaxPendingTransactions: 0,
 		MaxChannelDuration:     1,
-		MaxL1TxSize:            240_000,
-		CompressorConfig: compressor.CLIConfig{
-			TargetL1TxSizeBytes: sys.Cfg.BatcherTargetL1TxSizeBytes,
+		MaxL1TxSize:            120_000,
 		TargetNumFrames:        1,
 		ApproxComprRatio:       0.4,
-		},
 		SubSafetyMargin:        4,
 		PollInterval:           1 * time.Second,
 		TxMgrConfig:            newTxMgrConfig(sys.EthInstances["l1"].WSEndpoint(), sys.Cfg.Secrets.Batcher),

op-e2e/setup.go

@@ -39,7 +39,6 @@ import (
 	"github.com/ethereum/go-ethereum/rpc"
 
 	bss "github.com/ethereum-optimism/optimism/op-batcher/batcher"
-	"github.com/ethereum-optimism/optimism/op-batcher/compressor"
 	batcherFlags "github.com/ethereum-optimism/optimism/op-batcher/flags"
 	"github.com/ethereum-optimism/optimism/op-bindings/predeploys"
 	"github.com/ethereum-optimism/optimism/op-chain-ops/genesis"
@@ -155,9 +154,9 @@ func DefaultSystemConfig(t *testing.T) SystemConfig {
 		P2PTopology:            nil, // no P2P connectivity by default
 		NonFinalizedProposals:  false,
 		ExternalL2Shim:         config.ExternalL2Shim,
-		BatcherTargetL1TxSizeBytes: 100_000,
 		DataAvailabilityType:   batcherFlags.CalldataType,
 		MaxPendingTransactions: 1,
+		BatcherTargetNumFrames: 1,
 	}
 }
 
@@ -213,16 +212,13 @@ type SystemConfig struct {
 	// Configure data-availability type that is used by the batcher.
 	DataAvailabilityType batcherFlags.DataAvailabilityType
 
-	// Target L1 tx size for the batcher transactions
-	BatcherTargetL1TxSizeBytes uint64
-
 	// Max L1 tx size for the batcher transactions
 	BatcherMaxL1TxSizeBytes uint64
 
 	// Target number of frames to create per channel. Can be used to create
 	// multi-blob transactions.
 	// Default is 1 if unset.
-	BatcherTargetNumFrames uint64
+	BatcherTargetNumFrames int
 
 	// whether to actually use BatcherMaxL1TxSizeBytes for blobs, insteaf of max blob size
 	BatcherUseMaxTxSizeForBlobs bool
@@ -815,7 +811,7 @@ func (cfg SystemConfig) Start(t *testing.T, _opts ...SystemConfigOption) (*Syste
 	// batcher defaults if unset
 	batcherMaxL1TxSizeBytes := cfg.BatcherMaxL1TxSizeBytes
 	if batcherMaxL1TxSizeBytes == 0 {
-		batcherMaxL1TxSizeBytes = 240_000
+		batcherMaxL1TxSizeBytes = 120_000
 	}
 	batcherTargetNumFrames := cfg.BatcherTargetNumFrames
 	if batcherTargetNumFrames == 0 {
@@ -829,11 +825,8 @@ func (cfg SystemConfig) Start(t *testing.T, _opts ...SystemConfigOption) (*Syste
 		MaxChannelDuration:       1,
 		MaxL1TxSize:              batcherMaxL1TxSizeBytes,
 		TestUseMaxTxSizeForBlobs: cfg.BatcherUseMaxTxSizeForBlobs,
-		CompressorConfig: compressor.CLIConfig{
-			TargetL1TxSizeBytes: cfg.BatcherTargetL1TxSizeBytes,
 		TargetNumFrames:          int(batcherTargetNumFrames),
 		ApproxComprRatio:         0.4,
-		},
 		SubSafetyMargin:          4,
 		PollInterval:             50 * time.Millisecond,
 		TxMgrConfig:              newTxMgrConfig(sys.EthInstances["l1"].WSEndpoint(), cfg.Secrets.Batcher),

op-e2e/system_test.go

@@ -243,7 +243,7 @@ func TestSystemE2EDencunAtGenesisWithBlobs(t *testing.T) {
 	InitParallel(t)
 
 	cfg := DefaultSystemConfig(t)
-	//cancun is on from genesis:
+	// cancun is on from genesis:
 	genesisActivation := hexutil.Uint64(0)
 	cfg.DeployConfig.L1CancunTimeOffset = &genesisActivation // i.e. turn cancun on at genesis time + 0
 
@@ -1469,26 +1469,27 @@ func TestBatcherMultiTx(t *testing.T) {
 
 	cfg := DefaultSystemConfig(t)
 	cfg.MaxPendingTransactions = 0 // no limit on parallel txs
-	cfg.BatcherTargetL1TxSizeBytes = 2 // ensures that batcher txs are as small as possible
+	// ensures that batcher txs are as small as possible
+	cfg.BatcherMaxL1TxSizeBytes = derive.FrameV0OverHeadSize + 1 /*version bytes*/ + 1
 	cfg.DisableBatcher = true
 	sys, err := cfg.Start(t)
-	require.Nil(t, err, "Error starting up system")
+	require.NoError(t, err, "Error starting up system")
 	defer sys.Close()
 
 	l1Client := sys.Clients["l1"]
 	l2Seq := sys.Clients["sequencer"]
 
 	_, err = geth.WaitForBlock(big.NewInt(10), l2Seq, time.Duration(cfg.DeployConfig.L2BlockTime*15)*time.Second)
-	require.Nil(t, err, "Waiting for L2 blocks")
+	require.NoError(t, err, "Waiting for L2 blocks")
 
 	ctx, cancel := context.WithTimeout(context.Background(), 30*time.Second)
 	defer cancel()
 	l1Number, err := l1Client.BlockNumber(ctx)
-	require.Nil(t, err)
+	require.NoError(t, err)
 
 	// start batch submission
 	err = sys.BatchSubmitter.Driver().StartBatchSubmitting()
-	require.Nil(t, err)
+	require.NoError(t, err)
 
 	totalTxCount := 0
 	// wait for up to 10 L1 blocks, usually only 3 is required, but it's
@@ -1496,7 +1497,7 @@ func TestBatcherMultiTx(t *testing.T) {
 	// so we wait additional blocks.
 	for i := int64(0); i < 10; i++ {
 		block, err := geth.WaitForBlock(big.NewInt(int64(l1Number)+i), l1Client, time.Duration(cfg.DeployConfig.L1BlockTime*5)*time.Second)
-		require.Nil(t, err, "Waiting for l1 blocks")
+		require.NoError(t, err, "Waiting for l1 blocks")
 		totalTxCount += len(block.Transactions())
 
 		if totalTxCount >= 10 {