eq.log.Warn("did not finish previous block building, starting new building now","prev_onto",eq.buildingOnto,"prev_payload_id",eq.buildingID,"new_onto",parent)
// TODO: maybe worth it to force-cancel the old payload ID here.
returnfmt.Errorf("cannot build new L2 block with L1 origin %s (parent L1 %s) on current L2 head %s with L1 origin %s",l1Origin,l1Origin.ParentHash,l2Head,l2Head.L1Origin)
}
d.log.Info("creating new block","parent",l2Head,"l1Origin",l1Origin)
ifd.buildingID!=(eth.PayloadID{}){// This may happen when we decide to build a different block in response to a reorg. Or when previous block building failed.
d.log.Warn("did not finish previous block building, starting new building now","prev_onto",d.buildingOnto,"prev_payload_id",d.buildingID,"new_onto",l2Head)
require.GreaterOrEqual(t,l2Head.Time,l1Times[l2Head.L1Origin],"the L2 time >= the L1 time")
require.Less(t,l2Head.Time-l1Times[l2Head.L1Origin],uint64(100),"The L1 origin time is close to the L2 time")
require.Less(t,clockTime.Sub(time.Unix(int64(l2Head.Time),0)).Abs(),2*time.Second,"L2 time is accurate, within 2 seconds of wallclock")
require.Greater(t,engControl.avgBuildingTime(),time.Second,"With 2 second block time and 1 second error backoff and healthy-on-average errors, building time should at least be a second")
require.Greater(t,engControl.avgTxsPerBlock(),3.0,"We expect at least 1 system tx per block, but with a mocked 0-10 txs we expect an higher avg")
s.log.Error("Sequenced payload cannot be transformed into valid L2 block reference","err",err)
returnfmt.Errorf("sequenced payload cannot be transformed into valid L2 block reference: %w",err)
}
// Update our L2 head block based on the new unsafe block we just generated.
s.derivation.SetUnsafeHead(newUnsafeL2Head)
s.log.Info("Sequenced new l2 block","l2_unsafe",newUnsafeL2Head,"l1_origin",newUnsafeL2Head.L1Origin,"txs",len(payload.Transactions),"time",newUnsafeL2Head.Time)
"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.15;\n\nimport { Semver } from \"@eth-optimism/contracts-bedrock/contracts/universal/Semver.sol\";\n\n/**\n * @title AttestationStation\n * @author Optimism Collective\n * @author Gitcoin\n * @notice Where attestations live.\n */\ncontract AttestationStation is Semver {\n /**\n * @notice Struct representing data that is being attested.\n *\n * @custom:field about Address for which the attestation is about.\n * @custom:field key A bytes32 key for the attestation.\n * @custom:field val The attestation as arbitrary bytes.\n */\n struct AttestationData {\n address about;\n bytes32 key;\n bytes val;\n }\n\n /**\n * @notice Maps addresses to attestations. Creator => About => Key => Value.\n */\n mapping(address => mapping(address => mapping(bytes32 => bytes))) public attestations;\n\n /**\n * @notice Emitted when Attestation is created.\n *\n * @param creator Address that made the attestation.\n * @param about Address attestation is about.\n * @param key Key of the attestation.\n * @param val Value of the attestation.\n */\n event AttestationCreated(\n address indexed creator,\n address indexed about,\n bytes32 indexed key,\n bytes val\n );\n\n /**\n * @custom:semver 1.1.0\n */\n constructor() Semver(1, 1, 0) {}\n\n /**\n * @notice Allows anyone to create an attestation.\n *\n * @param _about Address that the attestation is about.\n * @param _key A key used to namespace the attestation.\n * @param _val An arbitrary value stored as part of the attestation.\n */\n function attest(\n address _about,\n bytes32 _key,\n bytes memory _val\n ) public {\n attestations[msg.sender][_about][_key] = _val;\n\n emit AttestationCreated(msg.sender, _about, _key, _val);\n }\n\n /**\n * @notice Allows anyone to create attestations.\n *\n * @param _attestations An array of attestation data.\n */\n function attest(AttestationData[] calldata _attestations) external {\n uint256 length = _attestations.length;\n for (uint256 i = 0; i < length; ) {\n AttestationData memory attestation = _attestations[i];\n\n attest(attestation.about, attestation.key, attestation.val);\n\n unchecked {\n ++i;\n }\n }\n }\n}\n"
"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.15;\n\nimport { Strings } from \"@openzeppelin/contracts/utils/Strings.sol\";\n\n/**\n * @title Semver\n * @notice Semver is a simple contract for managing contract versions.\n */\ncontract Semver {\n /**\n * @notice Contract version number (major).\n */\n uint256 private immutable MAJOR_VERSION;\n\n /**\n * @notice Contract version number (minor).\n */\n uint256 private immutable MINOR_VERSION;\n\n /**\n * @notice Contract version number (patch).\n */\n uint256 private immutable PATCH_VERSION;\n\n /**\n * @param _major Version number (major).\n * @param _minor Version number (minor).\n * @param _patch Version number (patch).\n */\n constructor(\n uint256 _major,\n uint256 _minor,\n uint256 _patch\n ) {\n MAJOR_VERSION = _major;\n MINOR_VERSION = _minor;\n PATCH_VERSION = _patch;\n }\n\n /**\n * @notice Returns the full semver contract version.\n *\n * @return Semver contract version as a string.\n */\n function version() public view returns (string memory) {\n return\n string(\n abi.encodePacked(\n Strings.toString(MAJOR_VERSION),\n\".\",\n Strings.toString(MINOR_VERSION),\n\".\",\n Strings.toString(PATCH_VERSION)\n )\n );\n }\n}\n"
},
"@openzeppelin/contracts/utils/Strings.sol":{
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n bytes16 private constant _HEX_SYMBOLS = \"0123456789abcdef\";\n uint8 private constant _ADDRESS_LENGTH = 20;\n\n /**\n * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n */\n function toString(uint256 value) internal pure returns (string memory) {\n // Inspired by OraclizeAPI's implementation - MIT licence\n // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol\n\n if (value == 0) {\n return \"0\";\n }\n uint256 temp = value;\n uint256 digits;\n while (temp != 0) {\n digits++;\n temp /= 10;\n }\n bytes memory buffer = new bytes(digits);\n while (value != 0) {\n digits -= 1;\n buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));\n value /= 10;\n }\n return string(buffer);\n }\n\n /**\n * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n */\n function toHexString(uint256 value) internal pure returns (string memory) {\n if (value == 0) {\n return \"0x00\";\n }\n uint256 temp = value;\n uint256 length = 0;\n while (temp != 0) {\n length++;\n temp >>= 8;\n }\n return toHexString(value, length);\n }\n\n /**\n * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n */\n function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n bytes memory buffer = new bytes(2 * length + 2);\n buffer[0] = \"0\";\n buffer[1] = \"x\";\n for (uint256 i = 2 * length + 1; i > 1; --i) {\n buffer[i] = _HEX_SYMBOLS[value & 0xf];\n value >>= 4;\n }\n require(value == 0, \"Strings: hex length insufficient\");\n return string(buffer);\n }\n\n /**\n * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.\n */\n function toHexString(address addr) internal pure returns (string memory) {\n return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);\n }\n}\n"
},
"contracts/universal/op-nft/Optimist.sol":{
"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.15;\n\nimport { Semver } from \"@eth-optimism/contracts-bedrock/contracts/universal/Semver.sol\";\nimport {\n ERC721BurnableUpgradeable\n} from \"@openzeppelin/contracts-upgradeable/token/ERC721/extensions/ERC721BurnableUpgradeable.sol\";\nimport { AttestationStation } from \"./AttestationStation.sol\";\nimport { Strings } from \"@openzeppelin/contracts/utils/Strings.sol\";\n\n/**\n * @author Optimism Collective\n * @author Gitcoin\n * @title Optimist\n * @notice A Soul Bound Token for real humans only(tm).\n */\ncontract Optimist is ERC721BurnableUpgradeable, Semver {\n /**\n * @notice Address of the AttestationStation contract.\n */\n AttestationStation public immutable ATTESTATION_STATION;\n\n /**\n * @notice Attestor who attests to baseURI and allowlist.\n */\n address public immutable ATTESTOR;\n\n /**\n * @custom:semver 1.0.0\n * @param _name Token name.\n * @param _symbol Token symbol.\n * @param _attestor Address of the attestor.\n * @param _attestationStation Address of the AttestationStation contract.\n */\n constructor(\n string memory _name,\n string memory _symbol,\n address _attestor,\n AttestationStation _attestationStation\n ) Semver(1, 0, 0) {\n ATTESTOR = _attestor;\n ATTESTATION_STATION = _attestationStation;\n initialize(_name, _symbol);\n }\n\n /**\n * @notice Initializes the Optimist contract.\n *\n * @param _name Token name.\n * @param _symbol Token symbol.\n */\n function initialize(string memory _name, string memory _symbol) public initializer {\n __ERC721_init(_name, _symbol);\n __ERC721Burnable_init();\n }\n\n /**\n * @notice Allows an address to mint an Optimist NFT. Token ID is the uint256 representation\n * of the recipient's address. Recipients must be permitted to mint, eventually anyone\n * will be able to mint. One token per address.\n *\n * @param _recipient Address of the token recipient.\n */\n function mint(address _recipient) public {\n require(isOnAllowList(_recipient), \"Optimist: address is not on allowList\");\n _safeMint(_recipient, tokenIdOfAddress(_recipient));\n }\n\n /**\n * @notice Returns the baseURI for all tokens.\n *\n * @return BaseURI for all tokens.\n */\n function baseURI() public view returns (string memory) {\n return\n string(\n abi.encodePacked(\n ATTESTATION_STATION.attestations(\n ATTESTOR,\n address(this),\n bytes32(\"optimist.base-uri\")\n )\n )\n );\n }\n\n /**\n * @notice Returns the token URI for a given token by ID\n *\n * @param _tokenId Token ID to query.\n\n * @return Token URI for the given token by ID.\n */\n function tokenURI(uint256 _tokenId) public view virtual override returns (string memory) {\n return\n string(\n abi.encodePacked(\n baseURI(),\n\"/\",\n // Properly format the token ID as a 20 byte hex string (address).\n Strings.toHexString(_tokenId, 20),\n\".json\"\n )\n );\n }\n\n /**\n * @notice Checks whether a given address is allowed to mint the Optimist NFT yet. Since the\n * Optimist NFT will also be used as part of the Citizens House, mints are currently\n * restricted. Eventually anyone will be able to mint.\n *\n * @return Whether or not the address is allowed to mint yet.\n */\n function isOnAllowList(address _recipient) public view returns (bool) {\n return\n ATTESTATION_STATION\n .attestations(ATTESTOR, _recipient, bytes32(\"optimist.can-mint\"))\n .length > 0;\n }\n\n /**\n * @notice Returns the token ID for the token owned by a given address. This is the uint256\n * representation of the given address.\n *\n * @return Token ID for the token owned by the given address.\n */\n function tokenIdOfAddress(address _owner) public pure returns (uint256) {\n return uint256(uint160(_owner));\n }\n\n /**\n * @notice Disabled for the Optimist NFT (Soul Bound Token).\n */\n function approve(address, uint256) public pure override {\n revert(\"Optimist: soul bound token\");\n }\n\n /**\n * @notice Disabled for the Optimist NFT (Soul Bound Token).\n */\n function setApprovalForAll(address, bool) public virtual override {\n revert(\"Optimist: soul bound token\");\n }\n\n /**\n * @notice Prevents transfers of the Optimist NFT (Soul Bound Token).\n *\n * @param _from Address of the token sender.\n * @param _to Address of the token recipient.\n */\n function _beforeTokenTransfer(\n address _from,\n address _to,\n uint256\n ) internal virtual override {\n require(_from == address(0) || _to == address(0), \"Optimist: soul bound token\");\n }\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/extensions/ERC721Burnable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../ERC721Upgradeable.sol\";\nimport \"../../../utils/ContextUpgradeable.sol\";\nimport \"../../../proxy/utils/Initializable.sol\";\n\n/**\n * @title ERC721 Burnable Token\n * @dev ERC721 Token that can be burned (destroyed).\n */\nabstract contract ERC721BurnableUpgradeable is Initializable, ContextUpgradeable, ERC721Upgradeable {\n function __ERC721Burnable_init() internal onlyInitializing {\n }\n\n function __ERC721Burnable_init_unchained() internal onlyInitializing {\n }\n /**\n * @dev Burns `tokenId`. See {ERC721-_burn}.\n *\n * Requirements:\n *\n * - The caller must own `tokenId` or be an approved operator.\n */\n function burn(uint256 tokenId) public virtual {\n //solhint-disable-next-line max-line-length\n require(_isApprovedOrOwner(_msgSender(), tokenId), \"ERC721: caller is not token owner nor approved\");\n _burn(tokenId);\n }\n\n /**\n * @dev This empty reserved space is put in place to allow future versions to add new\n * variables without shifting down storage in the inheritance chain.\n * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n */\n uint256[50] private __gap;\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/ERC721.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./IERC721Upgradeable.sol\";\nimport \"./IERC721ReceiverUpgradeable.sol\";\nimport \"./extensions/IERC721MetadataUpgradeable.sol\";\nimport \"../../utils/AddressUpgradeable.sol\";\nimport \"../../utils/ContextUpgradeable.sol\";\nimport \"../../utils/StringsUpgradeable.sol\";\nimport \"../../utils/introspection/ERC165Upgradeable.sol\";\nimport \"../../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\ncontract ERC721Upgradeable is Initializable, ContextUpgradeable, ERC165Upgradeable, IERC721Upgradeable, IERC721MetadataUpgradeable {\n using AddressUpgradeable for address;\n using StringsUpgradeable for uint256;\n\n // Token name\n string private _name;\n\n // Token symbol\n string private _symbol;\n\n // Mapping from token ID to owner address\n mapping(uint256 => address) private _owners;\n\n // Mapping owner address to token count\n mapping(address => uint256) private _balances;\n\n // Mapping from token ID to approved address\n mapping(uint256 => address) private _tokenApprovals;\n\n // Mapping from owner to operator approvals\n mapping(address => mapping(address => bool)) private _operatorApprovals;\n\n /**\n * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n */\n function __ERC721_init(string memory name_, string memory symbol_) internal onlyInitializing {\n __ERC721_init_unchained(name_, symbol_);\n }\n\n function __ERC721_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {\n _name = name_;\n _symbol = symbol_;\n }\n\n /**\n * @dev See {IERC165-supportsInterface}.\n */\n function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable, IERC165Upgradeable) returns (bool) {\n return\n interfaceId == type(IERC721Upgradeable).interfaceId ||\n interfaceId == type(IERC721MetadataUpgradeable).interfaceId ||\n super.supportsInterface(interfaceId);\n }\n\n /**\n * @dev See {IERC721-balanceOf}.\n */\n function balanceOf(address owner) public view virtual override returns (uint256) {\n require(owner != address(0), \"ERC721: address zero is not a valid owner\");\n return _balances[owner];\n }\n\n /**\n * @dev See {IERC721-ownerOf}.\n */\n function ownerOf(uint256 tokenId) public view virtual override returns (address) {\n address owner = _owners[tokenId];\n require(owner != address(0), \"ERC721: invalid token ID\");\n return owner;\n }\n\n /**\n * @dev See {IERC721Metadata-name}.\n */\n function name() public view virtual override returns (string memory) {\n return _name;\n }\n\n /**\n * @dev See {IERC721Metadata-symbol}.\n */\n function symbol() public view virtual override returns (string memory) {\n return _symbol;\n }\n\n /**\n * @dev See {IERC721Metadata-tokenURI}.\n */\n function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {\n _requireMinted(tokenId);\n\n string memory baseURI = _baseURI();\n return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : \"\";\n }\n\n /**\n * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n * by default, can be overridden in child contracts.\n */\n function _baseURI() internal view virtual returns (string memory) {\n return \"\";\n }\n\n /**\n * @dev See {IERC721-approve}.\n */\n function approve(address to, uint256 tokenId) public virtual override {\n address owner = ERC721Upgradeable.ownerOf(tokenId);\n require(to != owner, \"ERC721: approval to current owner\");\n\n require(\n _msgSender() == owner || isApprovedForAll(owner, _msgSender()),\n\"ERC721: approve caller is not token owner nor approved for all\"\n );\n\n _approve(to, tokenId);\n }\n\n /**\n * @dev See {IERC721-getApproved}.\n */\n function getApproved(uint256 tokenId) public view virtual override returns (address) {\n _requireMinted(tokenId);\n\n return _tokenApprovals[tokenId];\n }\n\n /**\n * @dev See {IERC721-setApprovalForAll}.\n */\n function setApprovalForAll(address operator, bool approved) public virtual override {\n _setApprovalForAll(_msgSender(), operator, approved);\n }\n\n /**\n * @dev See {IERC721-isApprovedForAll}.\n */\n function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {\n return _operatorApprovals[owner][operator];\n }\n\n /**\n * @dev See {IERC721-transferFrom}.\n */\n function transferFrom(\n address from,\n address to,\n uint256 tokenId\n ) public virtual override {\n //solhint-disable-next-line max-line-length\n require(_isApprovedOrOwner(_msgSender(), tokenId), \"ERC721: caller is not token owner nor approved\");\n\n _transfer(from, to, tokenId);\n }\n\n /**\n * @dev See {IERC721-safeTransferFrom}.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId\n ) public virtual override {\n safeTransferFrom(from, to, tokenId, \"\");\n }\n\n /**\n * @dev See {IERC721-safeTransferFrom}.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId,\n bytes memory data\n ) public virtual override {\n require(_isApprovedOrOwner(_msgSender(), tokenId), \"ERC721: caller is not token owner nor approved\");\n _safeTransfer(from, to, tokenId, data);\n }\n\n /**\n * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n *\n * `data` is additional data, it has no specified format and it is sent in call to `to`.\n *\n * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.\n * implement alternative mechanisms to perform token transfer, such as signature-based.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must exist and be owned by `from`.\n * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function _safeTransfer(\n address from,\n address to,\n uint256 tokenId,\n bytes memory data\n ) internal virtual {\n _transfer(from, to, tokenId);\n require(_checkOnERC721Received(from, to, tokenId, data), \"ERC721: transfer to non ERC721Receiver implementer\");\n }\n\n /**\n * @dev Returns whether `tokenId` exists.\n *\n * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.\n *\n * Tokens start existing when they are minted (`_mint`),\n * and stop existing when they are burned (`_burn`).\n */\n function _exists(uint256 tokenId) internal view virtual returns (bool) {\n return _owners[tokenId] != address(0);\n }\n\n /**\n * @dev Returns whether `spender` is allowed to manage `tokenId`.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {\n address owner = ERC721Upgradeable.ownerOf(tokenId);\n return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);\n }\n\n /**\n * @dev Safely mints `tokenId` and transfers it to `to`.\n *\n * Requirements:\n *\n * - `tokenId` must not exist.\n * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function _safeMint(address to, uint256 tokenId) internal virtual {\n _safeMint(to, tokenId, \"\");\n }\n\n /**\n * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n */\n function _safeMint(\n address to,\n uint256 tokenId,\n bytes memory data\n ) internal virtual {\n _mint(to, tokenId);\n require(\n _checkOnERC721Received(address(0), to, tokenId, data),\n\"ERC721: transfer to non ERC721Receiver implementer\"\n );\n }\n\n /**\n * @dev Mints `tokenId` and transfers it to `to`.\n *\n * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n *\n * Requirements:\n *\n * - `tokenId` must not exist.\n * - `to` cannot be the zero address.\n *\n * Emits a {Transfer} event.\n */\n function _mint(address to, uint256 tokenId) internal virtual {\n require(to != address(0), \"ERC721: mint to the zero address\");\n require(!_exists(tokenId), \"ERC721: token already minted\");\n\n _beforeTokenTransfer(address(0), to, tokenId);\n\n _balances[to] += 1;\n _owners[tokenId] = to;\n\n emit Transfer(address(0), to, tokenId);\n\n _afterTokenTransfer(address(0), to, tokenId);\n }\n\n /**\n * @dev Destroys `tokenId`.\n * The approval is cleared when the token is burned.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n *\n * Emits a {Transfer} event.\n */\n function _burn(uint256 tokenId) internal virtual {\n address owner = ERC721Upgradeable.ownerOf(tokenId);\n\n _beforeTokenTransfer(owner, address(0), tokenId);\n\n // Clear approvals\n _approve(address(0), tokenId);\n\n _balances[owner] -= 1;\n delete _owners[tokenId];\n\n emit Transfer(owner, address(0), tokenId);\n\n _afterTokenTransfer(owner, address(0), tokenId);\n }\n\n /**\n * @dev Transfers `tokenId` from `from` to `to`.\n * As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n *\n * Requirements:\n *\n * - `to` cannot be the zero address.\n * - `tokenId` token must be owned by `from`.\n *\n * Emits a {Transfer} event.\n */\n function _transfer(\n address from,\n address to,\n uint256 tokenId\n ) internal virtual {\n require(ERC721Upgradeable.ownerOf(tokenId) == from, \"ERC721: transfer from incorrect owner\");\n require(to != address(0), \"ERC721: transfer to the zero address\");\n\n _beforeTokenTransfer(from, to, tokenId);\n\n // Clear approvals from the previous owner\n _approve(address(0), tokenId);\n\n _balances[from] -= 1;\n _balances[to] += 1;\n _owners[tokenId] = to;\n\n emit Transfer(from, to, tokenId);\n\n _afterTokenTransfer(from, to, tokenId);\n }\n\n /**\n * @dev Approve `to` to operate on `tokenId`\n *\n * Emits an {Approval} event.\n */\n function _approve(address to, uint256 tokenId) internal virtual {\n _tokenApprovals[tokenId] = to;\n emit Approval(ERC721Upgradeable.ownerOf(tokenId), to, tokenId);\n }\n\n /**\n * @dev Approve `operator` to operate on all of `owner` tokens\n *\n * Emits an {ApprovalForAll} event.\n */\n function _setApprovalForAll(\n address owner,\n address operator,\n bool approved\n ) internal virtual {\n require(owner != operator, \"ERC721: approve to caller\");\n _operatorApprovals[owner][operator] = approved;\n emit ApprovalForAll(owner, operator, approved);\n }\n\n /**\n * @dev Reverts if the `tokenId` has not been minted yet.\n */\n function _requireMinted(uint256 tokenId) internal view virtual {\n require(_exists(tokenId), \"ERC721: invalid token ID\");\n }\n\n /**\n * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.\n * The call is not executed if the target address is not a contract.\n *\n * @param from address representing the previous owner of the given token ID\n * @param to target address that will receive the tokens\n * @param tokenId uint256 ID of the token to be transferred\n * @param data bytes optional data to send along with the call\n * @return bool whether the call correctly returned the expected magic value\n */\n function _checkOnERC721Received(\n address from,\n address to,\n uint256 tokenId,\n bytes memory data\n ) private returns (bool) {\n if (to.isContract()) {\n try IERC721ReceiverUpgradeable(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n return retval == IERC721ReceiverUpgradeable.onERC721Received.selector;\n } catch (bytes memory reason) {\n if (reason.length == 0) {\n revert(\"ERC721: transfer to non ERC721Receiver implementer\");\n } else {\n /// @solidity memory-safe-assembly\n assembly {\n revert(add(32, reason), mload(reason))\n }\n }\n }\n } else {\n return true;\n }\n }\n\n /**\n * @dev Hook that is called before any token transfer. This includes minting\n * and burning.\n *\n * Calling conditions:\n *\n * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be\n * transferred to `to`.\n * - When `from` is zero, `tokenId` will be minted for `to`.\n * - When `to` is zero, ``from``'s `tokenId` will be burned.\n * - `from` and `to` are never both zero.\n *\n * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\n */\n function _beforeTokenTransfer(\n address from,\n address to,\n uint256 tokenId\n ) internal virtual {}\n\n /**\n * @dev Hook that is called after any transfer of tokens. This includes\n * minting and burning.\n *\n * Calling conditions:\n *\n * - when `from` and `to` are both non-zero.\n * - `from` and `to` are never both zero.\n *\n * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\n */\n function _afterTokenTransfer(\n address from,\n address to,\n uint256 tokenId\n ) internal virtual {}\n\n /**\n * @dev This empty reserved space is put in place to allow future versions to add new\n * variables without shifting down storage in the inheritance chain.\n * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n */\n uint256[44] private __gap;\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract ContextUpgradeable is Initializable {\n function __Context_init() internal onlyInitializing {\n }\n\n function __Context_init_unchained() internal onlyInitializing {\n }\n function _msgSender() internal view virtual returns (address) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes calldata) {\n return msg.data;\n }\n\n /**\n * @dev This empty reserved space is put in place to allow future versions to add new\n * variables without shifting down storage in the inheritance chain.\n * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n */\n uint256[50] private __gap;\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)\n\npragma solidity ^0.8.2;\n\nimport \"../../utils/AddressUpgradeable.sol\";\n\n/**\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be\n * reused. This mechanism prevents re-execution of each \"step\" but allows the creation of new initialization steps in\n * case an upgrade adds a module that needs to be initialized.\n *\n * For example:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * contract MyToken is ERC20Upgradeable {\n * function initialize() initializer public {\n * __ERC20_init(\"MyToken\", \"MTK\");\n * }\n * }\n * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {\n * function initializeV2() reinitializer(2) public {\n * __ERC20Permit_init(\"MyToken\");\n * }\n * }\n * ```\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n *\n * [CAUTION]\n * ====\n * Avoid leaving a contract uninitialized.\n *\n * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation\n * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke\n * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * /// @custom:oz-upgrades-unsafe-allow constructor\n * constructor() {\n * _disableInitializers();\n * }\n * ```\n * ====\n */\nabstract contract Initializable {\n /**\n * @dev Indicates that the contract has been initialized.\n * @custom:oz-retyped-from bool\n */\n uint8 private _initialized;\n\n /**\n * @dev Indicates that the contract is in the process of being initialized.\n */\n bool private _initializing;\n\n /**\n * @dev Triggered when the contract has been initialized or reinitialized.\n */\n event Initialized(uint8 version);\n\n /**\n * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,\n * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.\n */\n modifier initializer() {\n bool isTopLevelCall = !_initializing;\n require(\n (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),\n\"Initializable: contract is already initialized\"\n );\n _initialized = 1;\n if (isTopLevelCall) {\n _initializing = true;\n }\n _;\n if (isTopLevelCall) {\n _initializing = false;\n emit Initialized(1);\n }\n }\n\n /**\n * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the\n * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be\n * used to initialize parent contracts.\n *\n * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original\n * initialization step. This is essential to configure modules that are added through upgrades and that require\n * initialization.\n *\n * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in\n * a contract, executing them in the right order is up to the developer or operator.\n */\n modifier reinitializer(uint8 version) {\n require(!_initializing && _initialized < version, \"Initializable: contract is already initialized\");\n _initialized = version;\n _initializing = true;\n _;\n _initializing = false;\n emit Initialized(version);\n }\n\n /**\n * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n * {initializer} and {reinitializer} modifiers, directly or indirectly.\n */\n modifier onlyInitializing() {\n require(_initializing, \"Initializable: contract is not initializing\");\n _;\n }\n\n /**\n * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.\n * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized\n * to any version. It is recommended to use this to lock implementation contracts that are designed to be called\n * through proxies.\n */\n function _disableInitializers() internal virtual {\n require(!_initializing, \"Initializable: contract is initializing\");\n if (_initialized < type(uint8).max) {\n _initialized = type(uint8).max;\n emit Initialized(type(uint8).max);\n }\n }\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../../utils/introspection/IERC165Upgradeable.sol\";\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721Upgradeable is IERC165Upgradeable {\n /**\n * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n */\n event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n /**\n * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n */\n event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n /**\n * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n */\n event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n /**\n * @dev Returns the number of tokens in ``owner``'s account.\n */\n function balanceOf(address owner) external view returns (uint256 balance);\n\n /**\n * @dev Returns the owner of the `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function ownerOf(uint256 tokenId) external view returns (address owner);\n\n /**\n * @dev Safely transfers `tokenId` token from `from` to `to`.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must exist and be owned by `from`.\n * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId,\n bytes calldata data\n ) external;\n\n /**\n * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must exist and be owned by `from`.\n * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.\n * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId\n ) external;\n\n /**\n * @dev Transfers `tokenId` token from `from` to `to`.\n *\n * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must be owned by `from`.\n * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address from,\n address to,\n uint256 tokenId\n ) external;\n\n /**\n * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n * The approval is cleared when the token is transferred.\n *\n * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n *\n * Requirements:\n *\n * - The caller must own the token or be an approved operator.\n * - `tokenId` must exist.\n *\n * Emits an {Approval} event.\n */\n function approve(address to, uint256 tokenId) external;\n\n /**\n * @dev Approve or remove `operator` as an operator for the caller.\n * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n *\n * Requirements:\n *\n * - The `operator` cannot be the caller.\n *\n * Emits an {ApprovalForAll} event.\n */\n function setApprovalForAll(address operator, bool _approved) external;\n\n /**\n * @dev Returns the account approved for `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function getApproved(uint256 tokenId) external view returns (address operator);\n\n /**\n * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n *\n * See {setApprovalForAll}\n */\n function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721ReceiverUpgradeable {\n /**\n * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n * by `operator` from `from`, this function is called.\n *\n * It must return its Solidity selector to confirm the token transfer.\n * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.\n *\n * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n */\n function onERC721Received(\n address operator,\n address from,\n uint256 tokenId,\n bytes calldata data\n ) external returns (bytes4);\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary AddressUpgradeable {\n /**\n * @dev Returns true if `account` is a contract.\n *\n * [IMPORTANT]\n * ====\n * It is unsafe to assume that an address for which this function returns\n * false is an externally-owned account (EOA) and not a contract.\n *\n * Among others, `isContract` will return false for the following\n * types of addresses:\n *\n * - an externally-owned account\n * - a contract in construction\n * - an address where a contract will be created\n * - an address where a contract lived, but was destroyed\n * ====\n *\n * [IMPORTANT]\n * ====\n * You shouldn't rely on `isContract` to protect against flash loan attacks!\n *\n * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n * constructor.\n * ====\n */\n function isContract(address account) internal view returns (bool) {\n // This method relies on extcodesize/address.code.length, which returns 0\n // for contracts in construction, since the code is only stored at the end\n // of the constructor execution.\n\n return account.code.length > 0;\n }\n\n /**\n * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n * `recipient`, forwarding all available gas and reverting on errors.\n *\n * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n * of certain opcodes, possibly making contracts go over the 2300 gas limit\n * imposed by `transfer`, making them unable to receive funds via\n * `transfer`. {sendValue} removes this limitation.\n *\n * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n *\n * IMPORTANT: because control is transferred to `recipient`, care must be\n * taken to not create reentrancy vulnerabilities. Consider using\n * {ReentrancyGuard} or the\n * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n */\n function sendValue(address payable recipient, uint256 amount) internal {\n require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n (bool success, ) = recipient.call{value: amount}(\"\");\n require(success, \"Address: unable to send value, recipient may have reverted\");\n }\n\n /**\n * @dev Performs a Solidity function call using a low level `call`. A\n * plain `call` is an unsafe replacement for a function call: use this\n * function instead.\n *\n * If `target` reverts with a revert reason, it is bubbled up by this\n * function (like regular Solidity function calls).\n *\n * Returns the raw returned data. To convert to the expected return value,\n * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n *\n * Requirements:\n *\n * - `target` must be a contract.\n * - calling `target` with `data` must not revert.\n *\n * _Available since v3.1._\n */\n function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionCall(target, data, \"Address: low-level call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n * `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, 0, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but also transferring `value` wei to `target`.\n *\n * Requirements:\n *\n * - the calling contract must have an ETH balance of at least `value`.\n * - the called Solidity function must be `payable`.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n * with `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value,\n string memory errorMessage\n ) internal returns (bytes memory) {\n require(address(this).balance >= value, \"Address: insufficient balance for call\");\n require(isContract(target), \"Address: call to non-contract\");\n\n (bool success, bytes memory returndata) = target.call{value: value}(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n return functionStaticCall(target, data, \"Address: low-level static call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal view returns (bytes memory) {\n require(isContract(target), \"Address: static call to non-contract\");\n\n (bool success, bytes memory returndata) = target.staticcall(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the\n * revert reason using the provided one.\n *\n * _Available since v4.3._\n */\n function verifyCallResult(\n bool success,\n bytes memory returndata,\n string memory errorMessage\n ) internal pure returns (bytes memory) {\n if (success) {\n return returndata;\n } else {\n // Look for revert reason and bubble it up if present\n if (returndata.length > 0) {\n // The easiest way to bubble the revert reason is using memory via assembly\n /// @solidity memory-safe-assembly\n assembly {\n let returndata_size := mload(returndata)\n revert(add(32, returndata), returndata_size)\n }\n } else {\n revert(errorMessage);\n }\n }\n }\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./IERC165Upgradeable.sol\";\nimport \"../../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n * return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n *\n * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.\n */\nabstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {\n function __ERC165_init() internal onlyInitializing {\n }\n\n function __ERC165_init_unchained() internal onlyInitializing {\n }\n /**\n * @dev See {IERC165-supportsInterface}.\n */\n function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n return interfaceId == type(IERC165Upgradeable).interfaceId;\n }\n\n /**\n * @dev This empty reserved space is put in place to allow future versions to add new\n * variables without shifting down storage in the inheritance chain.\n * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n */\n uint256[50] private __gap;\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165Upgradeable {\n /**\n * @dev Returns true if this contract implements the interface defined by\n * `interfaceId`. See the corresponding\n * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n * to learn more about how these ids are created.\n *\n * This function call must use less than 30 000 gas.\n */\n function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n"
"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.15;\n\nimport { Semver } from \"@eth-optimism/contracts-bedrock/contracts/universal/Semver.sol\";\n\n/**\n * @title AttestationStation\n * @author Optimism Collective\n * @author Gitcoin\n * @notice Where attestations live.\n */\ncontract AttestationStation is Semver {\n /**\n * @notice Struct representing data that is being attested.\n *\n * @custom:field about Address for which the attestation is about.\n * @custom:field key A bytes32 key for the attestation.\n * @custom:field val The attestation as arbitrary bytes.\n */\n struct AttestationData {\n address about;\n bytes32 key;\n bytes val;\n }\n\n /**\n * @notice Maps addresses to attestations. Creator => About => Key => Value.\n */\n mapping(address => mapping(address => mapping(bytes32 => bytes))) public attestations;\n\n /**\n * @notice Emitted when Attestation is created.\n *\n * @param creator Address that made the attestation.\n * @param about Address attestation is about.\n * @param key Key of the attestation.\n * @param val Value of the attestation.\n */\n event AttestationCreated(\n address indexed creator,\n address indexed about,\n bytes32 indexed key,\n bytes val\n );\n\n /**\n * @custom:semver 1.1.0\n */\n constructor() Semver(1, 1, 0) {}\n\n /**\n * @notice Allows anyone to create an attestation.\n *\n * @param _about Address that the attestation is about.\n * @param _key A key used to namespace the attestation.\n * @param _val An arbitrary value stored as part of the attestation.\n */\n function attest(\n address _about,\n bytes32 _key,\n bytes memory _val\n ) public {\n attestations[msg.sender][_about][_key] = _val;\n\n emit AttestationCreated(msg.sender, _about, _key, _val);\n }\n\n /**\n * @notice Allows anyone to create attestations.\n *\n * @param _attestations An array of attestation data.\n */\n function attest(AttestationData[] calldata _attestations) external {\n uint256 length = _attestations.length;\n for (uint256 i = 0; i < length; ) {\n AttestationData memory attestation = _attestations[i];\n\n attest(attestation.about, attestation.key, attestation.val);\n\n unchecked {\n ++i;\n }\n }\n }\n}\n"
"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.15;\n\nimport { Strings } from \"@openzeppelin/contracts/utils/Strings.sol\";\n\n/**\n * @title Semver\n * @notice Semver is a simple contract for managing contract versions.\n */\ncontract Semver {\n /**\n * @notice Contract version number (major).\n */\n uint256 private immutable MAJOR_VERSION;\n\n /**\n * @notice Contract version number (minor).\n */\n uint256 private immutable MINOR_VERSION;\n\n /**\n * @notice Contract version number (patch).\n */\n uint256 private immutable PATCH_VERSION;\n\n /**\n * @param _major Version number (major).\n * @param _minor Version number (minor).\n * @param _patch Version number (patch).\n */\n constructor(\n uint256 _major,\n uint256 _minor,\n uint256 _patch\n ) {\n MAJOR_VERSION = _major;\n MINOR_VERSION = _minor;\n PATCH_VERSION = _patch;\n }\n\n /**\n * @notice Returns the full semver contract version.\n *\n * @return Semver contract version as a string.\n */\n function version() public view returns (string memory) {\n return\n string(\n abi.encodePacked(\n Strings.toString(MAJOR_VERSION),\n\".\",\n Strings.toString(MINOR_VERSION),\n\".\",\n Strings.toString(PATCH_VERSION)\n )\n );\n }\n}\n"
},
"@openzeppelin/contracts/utils/Strings.sol":{
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n bytes16 private constant _HEX_SYMBOLS = \"0123456789abcdef\";\n uint8 private constant _ADDRESS_LENGTH = 20;\n\n /**\n * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n */\n function toString(uint256 value) internal pure returns (string memory) {\n // Inspired by OraclizeAPI's implementation - MIT licence\n // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol\n\n if (value == 0) {\n return \"0\";\n }\n uint256 temp = value;\n uint256 digits;\n while (temp != 0) {\n digits++;\n temp /= 10;\n }\n bytes memory buffer = new bytes(digits);\n while (value != 0) {\n digits -= 1;\n buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));\n value /= 10;\n }\n return string(buffer);\n }\n\n /**\n * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n */\n function toHexString(uint256 value) internal pure returns (string memory) {\n if (value == 0) {\n return \"0x00\";\n }\n uint256 temp = value;\n uint256 length = 0;\n while (temp != 0) {\n length++;\n temp >>= 8;\n }\n return toHexString(value, length);\n }\n\n /**\n * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n */\n function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n bytes memory buffer = new bytes(2 * length + 2);\n buffer[0] = \"0\";\n buffer[1] = \"x\";\n for (uint256 i = 2 * length + 1; i > 1; --i) {\n buffer[i] = _HEX_SYMBOLS[value & 0xf];\n value >>= 4;\n }\n require(value == 0, \"Strings: hex length insufficient\");\n return string(buffer);\n }\n\n /**\n * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.\n */\n function toHexString(address addr) internal pure returns (string memory) {\n return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);\n }\n}\n"
},
"contracts/universal/op-nft/Optimist.sol":{
"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.15;\n\nimport { Semver } from \"@eth-optimism/contracts-bedrock/contracts/universal/Semver.sol\";\nimport {\n ERC721BurnableUpgradeable\n} from \"@openzeppelin/contracts-upgradeable/token/ERC721/extensions/ERC721BurnableUpgradeable.sol\";\nimport { AttestationStation } from \"./AttestationStation.sol\";\nimport { Strings } from \"@openzeppelin/contracts/utils/Strings.sol\";\n\n/**\n * @author Optimism Collective\n * @author Gitcoin\n * @title Optimist\n * @notice A Soul Bound Token for real humans only(tm).\n */\ncontract Optimist is ERC721BurnableUpgradeable, Semver {\n /**\n * @notice Address of the AttestationStation contract.\n */\n AttestationStation public immutable ATTESTATION_STATION;\n\n /**\n * @notice Attestor who attests to baseURI and allowlist.\n */\n address public immutable ATTESTOR;\n\n /**\n * @custom:semver 1.0.0\n * @param _name Token name.\n * @param _symbol Token symbol.\n * @param _attestor Address of the attestor.\n * @param _attestationStation Address of the AttestationStation contract.\n */\n constructor(\n string memory _name,\n string memory _symbol,\n address _attestor,\n AttestationStation _attestationStation\n ) Semver(1, 0, 0) {\n ATTESTOR = _attestor;\n ATTESTATION_STATION = _attestationStation;\n initialize(_name, _symbol);\n }\n\n /**\n * @notice Initializes the Optimist contract.\n *\n * @param _name Token name.\n * @param _symbol Token symbol.\n */\n function initialize(string memory _name, string memory _symbol) public initializer {\n __ERC721_init(_name, _symbol);\n __ERC721Burnable_init();\n }\n\n /**\n * @notice Allows an address to mint an Optimist NFT. Token ID is the uint256 representation\n * of the recipient's address. Recipients must be permitted to mint, eventually anyone\n * will be able to mint. One token per address.\n *\n * @param _recipient Address of the token recipient.\n */\n function mint(address _recipient) public {\n require(isOnAllowList(_recipient), \"Optimist: address is not on allowList\");\n _safeMint(_recipient, tokenIdOfAddress(_recipient));\n }\n\n /**\n * @notice Returns the baseURI for all tokens.\n *\n * @return BaseURI for all tokens.\n */\n function baseURI() public view returns (string memory) {\n return\n string(\n abi.encodePacked(\n ATTESTATION_STATION.attestations(\n ATTESTOR,\n address(this),\n bytes32(\"optimist.base-uri\")\n )\n )\n );\n }\n\n /**\n * @notice Returns the token URI for a given token by ID\n *\n * @param _tokenId Token ID to query.\n\n * @return Token URI for the given token by ID.\n */\n function tokenURI(uint256 _tokenId) public view virtual override returns (string memory) {\n return\n string(\n abi.encodePacked(\n baseURI(),\n\"/\",\n // Properly format the token ID as a 20 byte hex string (address).\n Strings.toHexString(_tokenId, 20),\n\".json\"\n )\n );\n }\n\n /**\n * @notice Checks whether a given address is allowed to mint the Optimist NFT yet. Since the\n * Optimist NFT will also be used as part of the Citizens House, mints are currently\n * restricted. Eventually anyone will be able to mint.\n *\n * @return Whether or not the address is allowed to mint yet.\n */\n function isOnAllowList(address _recipient) public view returns (bool) {\n return\n ATTESTATION_STATION\n .attestations(ATTESTOR, _recipient, bytes32(\"optimist.can-mint\"))\n .length > 0;\n }\n\n /**\n * @notice Returns the token ID for the token owned by a given address. This is the uint256\n * representation of the given address.\n *\n * @return Token ID for the token owned by the given address.\n */\n function tokenIdOfAddress(address _owner) public pure returns (uint256) {\n return uint256(uint160(_owner));\n }\n\n /**\n * @notice Disabled for the Optimist NFT (Soul Bound Token).\n */\n function approve(address, uint256) public pure override {\n revert(\"Optimist: soul bound token\");\n }\n\n /**\n * @notice Disabled for the Optimist NFT (Soul Bound Token).\n */\n function setApprovalForAll(address, bool) public virtual override {\n revert(\"Optimist: soul bound token\");\n }\n\n /**\n * @notice Prevents transfers of the Optimist NFT (Soul Bound Token).\n *\n * @param _from Address of the token sender.\n * @param _to Address of the token recipient.\n */\n function _beforeTokenTransfer(\n address _from,\n address _to,\n uint256\n ) internal virtual override {\n require(_from == address(0) || _to == address(0), \"Optimist: soul bound token\");\n }\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/extensions/ERC721Burnable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../ERC721Upgradeable.sol\";\nimport \"../../../utils/ContextUpgradeable.sol\";\nimport \"../../../proxy/utils/Initializable.sol\";\n\n/**\n * @title ERC721 Burnable Token\n * @dev ERC721 Token that can be burned (destroyed).\n */\nabstract contract ERC721BurnableUpgradeable is Initializable, ContextUpgradeable, ERC721Upgradeable {\n function __ERC721Burnable_init() internal onlyInitializing {\n }\n\n function __ERC721Burnable_init_unchained() internal onlyInitializing {\n }\n /**\n * @dev Burns `tokenId`. See {ERC721-_burn}.\n *\n * Requirements:\n *\n * - The caller must own `tokenId` or be an approved operator.\n */\n function burn(uint256 tokenId) public virtual {\n //solhint-disable-next-line max-line-length\n require(_isApprovedOrOwner(_msgSender(), tokenId), \"ERC721: caller is not token owner nor approved\");\n _burn(tokenId);\n }\n\n /**\n * @dev This empty reserved space is put in place to allow future versions to add new\n * variables without shifting down storage in the inheritance chain.\n * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n */\n uint256[50] private __gap;\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/ERC721.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./IERC721Upgradeable.sol\";\nimport \"./IERC721ReceiverUpgradeable.sol\";\nimport \"./extensions/IERC721MetadataUpgradeable.sol\";\nimport \"../../utils/AddressUpgradeable.sol\";\nimport \"../../utils/ContextUpgradeable.sol\";\nimport \"../../utils/StringsUpgradeable.sol\";\nimport \"../../utils/introspection/ERC165Upgradeable.sol\";\nimport \"../../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\ncontract ERC721Upgradeable is Initializable, ContextUpgradeable, ERC165Upgradeable, IERC721Upgradeable, IERC721MetadataUpgradeable {\n using AddressUpgradeable for address;\n using StringsUpgradeable for uint256;\n\n // Token name\n string private _name;\n\n // Token symbol\n string private _symbol;\n\n // Mapping from token ID to owner address\n mapping(uint256 => address) private _owners;\n\n // Mapping owner address to token count\n mapping(address => uint256) private _balances;\n\n // Mapping from token ID to approved address\n mapping(uint256 => address) private _tokenApprovals;\n\n // Mapping from owner to operator approvals\n mapping(address => mapping(address => bool)) private _operatorApprovals;\n\n /**\n * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n */\n function __ERC721_init(string memory name_, string memory symbol_) internal onlyInitializing {\n __ERC721_init_unchained(name_, symbol_);\n }\n\n function __ERC721_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {\n _name = name_;\n _symbol = symbol_;\n }\n\n /**\n * @dev See {IERC165-supportsInterface}.\n */\n function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable, IERC165Upgradeable) returns (bool) {\n return\n interfaceId == type(IERC721Upgradeable).interfaceId ||\n interfaceId == type(IERC721MetadataUpgradeable).interfaceId ||\n super.supportsInterface(interfaceId);\n }\n\n /**\n * @dev See {IERC721-balanceOf}.\n */\n function balanceOf(address owner) public view virtual override returns (uint256) {\n require(owner != address(0), \"ERC721: address zero is not a valid owner\");\n return _balances[owner];\n }\n\n /**\n * @dev See {IERC721-ownerOf}.\n */\n function ownerOf(uint256 tokenId) public view virtual override returns (address) {\n address owner = _owners[tokenId];\n require(owner != address(0), \"ERC721: invalid token ID\");\n return owner;\n }\n\n /**\n * @dev See {IERC721Metadata-name}.\n */\n function name() public view virtual override returns (string memory) {\n return _name;\n }\n\n /**\n * @dev See {IERC721Metadata-symbol}.\n */\n function symbol() public view virtual override returns (string memory) {\n return _symbol;\n }\n\n /**\n * @dev See {IERC721Metadata-tokenURI}.\n */\n function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {\n _requireMinted(tokenId);\n\n string memory baseURI = _baseURI();\n return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : \"\";\n }\n\n /**\n * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n * by default, can be overridden in child contracts.\n */\n function _baseURI() internal view virtual returns (string memory) {\n return \"\";\n }\n\n /**\n * @dev See {IERC721-approve}.\n */\n function approve(address to, uint256 tokenId) public virtual override {\n address owner = ERC721Upgradeable.ownerOf(tokenId);\n require(to != owner, \"ERC721: approval to current owner\");\n\n require(\n _msgSender() == owner || isApprovedForAll(owner, _msgSender()),\n\"ERC721: approve caller is not token owner nor approved for all\"\n );\n\n _approve(to, tokenId);\n }\n\n /**\n * @dev See {IERC721-getApproved}.\n */\n function getApproved(uint256 tokenId) public view virtual override returns (address) {\n _requireMinted(tokenId);\n\n return _tokenApprovals[tokenId];\n }\n\n /**\n * @dev See {IERC721-setApprovalForAll}.\n */\n function setApprovalForAll(address operator, bool approved) public virtual override {\n _setApprovalForAll(_msgSender(), operator, approved);\n }\n\n /**\n * @dev See {IERC721-isApprovedForAll}.\n */\n function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {\n return _operatorApprovals[owner][operator];\n }\n\n /**\n * @dev See {IERC721-transferFrom}.\n */\n function transferFrom(\n address from,\n address to,\n uint256 tokenId\n ) public virtual override {\n //solhint-disable-next-line max-line-length\n require(_isApprovedOrOwner(_msgSender(), tokenId), \"ERC721: caller is not token owner nor approved\");\n\n _transfer(from, to, tokenId);\n }\n\n /**\n * @dev See {IERC721-safeTransferFrom}.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId\n ) public virtual override {\n safeTransferFrom(from, to, tokenId, \"\");\n }\n\n /**\n * @dev See {IERC721-safeTransferFrom}.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId,\n bytes memory data\n ) public virtual override {\n require(_isApprovedOrOwner(_msgSender(), tokenId), \"ERC721: caller is not token owner nor approved\");\n _safeTransfer(from, to, tokenId, data);\n }\n\n /**\n * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n *\n * `data` is additional data, it has no specified format and it is sent in call to `to`.\n *\n * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.\n * implement alternative mechanisms to perform token transfer, such as signature-based.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must exist and be owned by `from`.\n * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function _safeTransfer(\n address from,\n address to,\n uint256 tokenId,\n bytes memory data\n ) internal virtual {\n _transfer(from, to, tokenId);\n require(_checkOnERC721Received(from, to, tokenId, data), \"ERC721: transfer to non ERC721Receiver implementer\");\n }\n\n /**\n * @dev Returns whether `tokenId` exists.\n *\n * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.\n *\n * Tokens start existing when they are minted (`_mint`),\n * and stop existing when they are burned (`_burn`).\n */\n function _exists(uint256 tokenId) internal view virtual returns (bool) {\n return _owners[tokenId] != address(0);\n }\n\n /**\n * @dev Returns whether `spender` is allowed to manage `tokenId`.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {\n address owner = ERC721Upgradeable.ownerOf(tokenId);\n return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);\n }\n\n /**\n * @dev Safely mints `tokenId` and transfers it to `to`.\n *\n * Requirements:\n *\n * - `tokenId` must not exist.\n * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function _safeMint(address to, uint256 tokenId) internal virtual {\n _safeMint(to, tokenId, \"\");\n }\n\n /**\n * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n */\n function _safeMint(\n address to,\n uint256 tokenId,\n bytes memory data\n ) internal virtual {\n _mint(to, tokenId);\n require(\n _checkOnERC721Received(address(0), to, tokenId, data),\n\"ERC721: transfer to non ERC721Receiver implementer\"\n );\n }\n\n /**\n * @dev Mints `tokenId` and transfers it to `to`.\n *\n * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n *\n * Requirements:\n *\n * - `tokenId` must not exist.\n * - `to` cannot be the zero address.\n *\n * Emits a {Transfer} event.\n */\n function _mint(address to, uint256 tokenId) internal virtual {\n require(to != address(0), \"ERC721: mint to the zero address\");\n require(!_exists(tokenId), \"ERC721: token already minted\");\n\n _beforeTokenTransfer(address(0), to, tokenId);\n\n _balances[to] += 1;\n _owners[tokenId] = to;\n\n emit Transfer(address(0), to, tokenId);\n\n _afterTokenTransfer(address(0), to, tokenId);\n }\n\n /**\n * @dev Destroys `tokenId`.\n * The approval is cleared when the token is burned.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n *\n * Emits a {Transfer} event.\n */\n function _burn(uint256 tokenId) internal virtual {\n address owner = ERC721Upgradeable.ownerOf(tokenId);\n\n _beforeTokenTransfer(owner, address(0), tokenId);\n\n // Clear approvals\n _approve(address(0), tokenId);\n\n _balances[owner] -= 1;\n delete _owners[tokenId];\n\n emit Transfer(owner, address(0), tokenId);\n\n _afterTokenTransfer(owner, address(0), tokenId);\n }\n\n /**\n * @dev Transfers `tokenId` from `from` to `to`.\n * As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n *\n * Requirements:\n *\n * - `to` cannot be the zero address.\n * - `tokenId` token must be owned by `from`.\n *\n * Emits a {Transfer} event.\n */\n function _transfer(\n address from,\n address to,\n uint256 tokenId\n ) internal virtual {\n require(ERC721Upgradeable.ownerOf(tokenId) == from, \"ERC721: transfer from incorrect owner\");\n require(to != address(0), \"ERC721: transfer to the zero address\");\n\n _beforeTokenTransfer(from, to, tokenId);\n\n // Clear approvals from the previous owner\n _approve(address(0), tokenId);\n\n _balances[from] -= 1;\n _balances[to] += 1;\n _owners[tokenId] = to;\n\n emit Transfer(from, to, tokenId);\n\n _afterTokenTransfer(from, to, tokenId);\n }\n\n /**\n * @dev Approve `to` to operate on `tokenId`\n *\n * Emits an {Approval} event.\n */\n function _approve(address to, uint256 tokenId) internal virtual {\n _tokenApprovals[tokenId] = to;\n emit Approval(ERC721Upgradeable.ownerOf(tokenId), to, tokenId);\n }\n\n /**\n * @dev Approve `operator` to operate on all of `owner` tokens\n *\n * Emits an {ApprovalForAll} event.\n */\n function _setApprovalForAll(\n address owner,\n address operator,\n bool approved\n ) internal virtual {\n require(owner != operator, \"ERC721: approve to caller\");\n _operatorApprovals[owner][operator] = approved;\n emit ApprovalForAll(owner, operator, approved);\n }\n\n /**\n * @dev Reverts if the `tokenId` has not been minted yet.\n */\n function _requireMinted(uint256 tokenId) internal view virtual {\n require(_exists(tokenId), \"ERC721: invalid token ID\");\n }\n\n /**\n * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.\n * The call is not executed if the target address is not a contract.\n *\n * @param from address representing the previous owner of the given token ID\n * @param to target address that will receive the tokens\n * @param tokenId uint256 ID of the token to be transferred\n * @param data bytes optional data to send along with the call\n * @return bool whether the call correctly returned the expected magic value\n */\n function _checkOnERC721Received(\n address from,\n address to,\n uint256 tokenId,\n bytes memory data\n ) private returns (bool) {\n if (to.isContract()) {\n try IERC721ReceiverUpgradeable(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n return retval == IERC721ReceiverUpgradeable.onERC721Received.selector;\n } catch (bytes memory reason) {\n if (reason.length == 0) {\n revert(\"ERC721: transfer to non ERC721Receiver implementer\");\n } else {\n /// @solidity memory-safe-assembly\n assembly {\n revert(add(32, reason), mload(reason))\n }\n }\n }\n } else {\n return true;\n }\n }\n\n /**\n * @dev Hook that is called before any token transfer. This includes minting\n * and burning.\n *\n * Calling conditions:\n *\n * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be\n * transferred to `to`.\n * - When `from` is zero, `tokenId` will be minted for `to`.\n * - When `to` is zero, ``from``'s `tokenId` will be burned.\n * - `from` and `to` are never both zero.\n *\n * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\n */\n function _beforeTokenTransfer(\n address from,\n address to,\n uint256 tokenId\n ) internal virtual {}\n\n /**\n * @dev Hook that is called after any transfer of tokens. This includes\n * minting and burning.\n *\n * Calling conditions:\n *\n * - when `from` and `to` are both non-zero.\n * - `from` and `to` are never both zero.\n *\n * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\n */\n function _afterTokenTransfer(\n address from,\n address to,\n uint256 tokenId\n ) internal virtual {}\n\n /**\n * @dev This empty reserved space is put in place to allow future versions to add new\n * variables without shifting down storage in the inheritance chain.\n * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n */\n uint256[44] private __gap;\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\nimport \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract ContextUpgradeable is Initializable {\n function __Context_init() internal onlyInitializing {\n }\n\n function __Context_init_unchained() internal onlyInitializing {\n }\n function _msgSender() internal view virtual returns (address) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes calldata) {\n return msg.data;\n }\n\n /**\n * @dev This empty reserved space is put in place to allow future versions to add new\n * variables without shifting down storage in the inheritance chain.\n * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n */\n uint256[50] private __gap;\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)\n\npragma solidity ^0.8.2;\n\nimport \"../../utils/AddressUpgradeable.sol\";\n\n/**\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be\n * reused. This mechanism prevents re-execution of each \"step\" but allows the creation of new initialization steps in\n * case an upgrade adds a module that needs to be initialized.\n *\n * For example:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * contract MyToken is ERC20Upgradeable {\n * function initialize() initializer public {\n * __ERC20_init(\"MyToken\", \"MTK\");\n * }\n * }\n * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {\n * function initializeV2() reinitializer(2) public {\n * __ERC20Permit_init(\"MyToken\");\n * }\n * }\n * ```\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n *\n * [CAUTION]\n * ====\n * Avoid leaving a contract uninitialized.\n *\n * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation\n * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke\n * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * /// @custom:oz-upgrades-unsafe-allow constructor\n * constructor() {\n * _disableInitializers();\n * }\n * ```\n * ====\n */\nabstract contract Initializable {\n /**\n * @dev Indicates that the contract has been initialized.\n * @custom:oz-retyped-from bool\n */\n uint8 private _initialized;\n\n /**\n * @dev Indicates that the contract is in the process of being initialized.\n */\n bool private _initializing;\n\n /**\n * @dev Triggered when the contract has been initialized or reinitialized.\n */\n event Initialized(uint8 version);\n\n /**\n * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,\n * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.\n */\n modifier initializer() {\n bool isTopLevelCall = !_initializing;\n require(\n (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),\n\"Initializable: contract is already initialized\"\n );\n _initialized = 1;\n if (isTopLevelCall) {\n _initializing = true;\n }\n _;\n if (isTopLevelCall) {\n _initializing = false;\n emit Initialized(1);\n }\n }\n\n /**\n * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the\n * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be\n * used to initialize parent contracts.\n *\n * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original\n * initialization step. This is essential to configure modules that are added through upgrades and that require\n * initialization.\n *\n * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in\n * a contract, executing them in the right order is up to the developer or operator.\n */\n modifier reinitializer(uint8 version) {\n require(!_initializing && _initialized < version, \"Initializable: contract is already initialized\");\n _initialized = version;\n _initializing = true;\n _;\n _initializing = false;\n emit Initialized(version);\n }\n\n /**\n * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n * {initializer} and {reinitializer} modifiers, directly or indirectly.\n */\n modifier onlyInitializing() {\n require(_initializing, \"Initializable: contract is not initializing\");\n _;\n }\n\n /**\n * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.\n * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized\n * to any version. It is recommended to use this to lock implementation contracts that are designed to be called\n * through proxies.\n */\n function _disableInitializers() internal virtual {\n require(!_initializing, \"Initializable: contract is initializing\");\n if (_initialized < type(uint8).max) {\n _initialized = type(uint8).max;\n emit Initialized(type(uint8).max);\n }\n }\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../../utils/introspection/IERC165Upgradeable.sol\";\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721Upgradeable is IERC165Upgradeable {\n /**\n * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n */\n event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n /**\n * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n */\n event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n /**\n * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n */\n event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n /**\n * @dev Returns the number of tokens in ``owner``'s account.\n */\n function balanceOf(address owner) external view returns (uint256 balance);\n\n /**\n * @dev Returns the owner of the `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function ownerOf(uint256 tokenId) external view returns (address owner);\n\n /**\n * @dev Safely transfers `tokenId` token from `from` to `to`.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must exist and be owned by `from`.\n * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId,\n bytes calldata data\n ) external;\n\n /**\n * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must exist and be owned by `from`.\n * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.\n * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n *\n * Emits a {Transfer} event.\n */\n function safeTransferFrom(\n address from,\n address to,\n uint256 tokenId\n ) external;\n\n /**\n * @dev Transfers `tokenId` token from `from` to `to`.\n *\n * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `tokenId` token must be owned by `from`.\n * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address from,\n address to,\n uint256 tokenId\n ) external;\n\n /**\n * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n * The approval is cleared when the token is transferred.\n *\n * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n *\n * Requirements:\n *\n * - The caller must own the token or be an approved operator.\n * - `tokenId` must exist.\n *\n * Emits an {Approval} event.\n */\n function approve(address to, uint256 tokenId) external;\n\n /**\n * @dev Approve or remove `operator` as an operator for the caller.\n * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n *\n * Requirements:\n *\n * - The `operator` cannot be the caller.\n *\n * Emits an {ApprovalForAll} event.\n */\n function setApprovalForAll(address operator, bool _approved) external;\n\n /**\n * @dev Returns the account approved for `tokenId` token.\n *\n * Requirements:\n *\n * - `tokenId` must exist.\n */\n function getApproved(uint256 tokenId) external view returns (address operator);\n\n /**\n * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n *\n * See {setApprovalForAll}\n */\n function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721ReceiverUpgradeable {\n /**\n * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n * by `operator` from `from`, this function is called.\n *\n * It must return its Solidity selector to confirm the token transfer.\n * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.\n *\n * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n */\n function onERC721Received(\n address operator,\n address from,\n uint256 tokenId,\n bytes calldata data\n ) external returns (bytes4);\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary AddressUpgradeable {\n /**\n * @dev Returns true if `account` is a contract.\n *\n * [IMPORTANT]\n * ====\n * It is unsafe to assume that an address for which this function returns\n * false is an externally-owned account (EOA) and not a contract.\n *\n * Among others, `isContract` will return false for the following\n * types of addresses:\n *\n * - an externally-owned account\n * - a contract in construction\n * - an address where a contract will be created\n * - an address where a contract lived, but was destroyed\n * ====\n *\n * [IMPORTANT]\n * ====\n * You shouldn't rely on `isContract` to protect against flash loan attacks!\n *\n * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n * constructor.\n * ====\n */\n function isContract(address account) internal view returns (bool) {\n // This method relies on extcodesize/address.code.length, which returns 0\n // for contracts in construction, since the code is only stored at the end\n // of the constructor execution.\n\n return account.code.length > 0;\n }\n\n /**\n * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n * `recipient`, forwarding all available gas and reverting on errors.\n *\n * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n * of certain opcodes, possibly making contracts go over the 2300 gas limit\n * imposed by `transfer`, making them unable to receive funds via\n * `transfer`. {sendValue} removes this limitation.\n *\n * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n *\n * IMPORTANT: because control is transferred to `recipient`, care must be\n * taken to not create reentrancy vulnerabilities. Consider using\n * {ReentrancyGuard} or the\n * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n */\n function sendValue(address payable recipient, uint256 amount) internal {\n require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n (bool success, ) = recipient.call{value: amount}(\"\");\n require(success, \"Address: unable to send value, recipient may have reverted\");\n }\n\n /**\n * @dev Performs a Solidity function call using a low level `call`. A\n * plain `call` is an unsafe replacement for a function call: use this\n * function instead.\n *\n * If `target` reverts with a revert reason, it is bubbled up by this\n * function (like regular Solidity function calls).\n *\n * Returns the raw returned data. To convert to the expected return value,\n * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n *\n * Requirements:\n *\n * - `target` must be a contract.\n * - calling `target` with `data` must not revert.\n *\n * _Available since v3.1._\n */\n function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionCall(target, data, \"Address: low-level call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n * `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, 0, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but also transferring `value` wei to `target`.\n *\n * Requirements:\n *\n * - the calling contract must have an ETH balance of at least `value`.\n * - the called Solidity function must be `payable`.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n * with `errorMessage` as a fallback revert reason when `target` reverts.\n *\n * _Available since v3.1._\n */\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value,\n string memory errorMessage\n ) internal returns (bytes memory) {\n require(address(this).balance >= value, \"Address: insufficient balance for call\");\n require(isContract(target), \"Address: call to non-contract\");\n\n (bool success, bytes memory returndata) = target.call{value: value}(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n return functionStaticCall(target, data, \"Address: low-level static call failed\");\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a static call.\n *\n * _Available since v3.3._\n */\n function functionStaticCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal view returns (bytes memory) {\n require(isContract(target), \"Address: static call to non-contract\");\n\n (bool success, bytes memory returndata) = target.staticcall(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /**\n * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the\n * revert reason using the provided one.\n *\n * _Available since v4.3._\n */\n function verifyCallResult(\n bool success,\n bytes memory returndata,\n string memory errorMessage\n ) internal pure returns (bytes memory) {\n if (success) {\n return returndata;\n } else {\n // Look for revert reason and bubble it up if present\n if (returndata.length > 0) {\n // The easiest way to bubble the revert reason is using memory via assembly\n /// @solidity memory-safe-assembly\n assembly {\n let returndata_size := mload(returndata)\n revert(add(32, returndata), returndata_size)\n }\n } else {\n revert(errorMessage);\n }\n }\n }\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./IERC165Upgradeable.sol\";\nimport \"../../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n * return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n *\n * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.\n */\nabstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {\n function __ERC165_init() internal onlyInitializing {\n }\n\n function __ERC165_init_unchained() internal onlyInitializing {\n }\n /**\n * @dev See {IERC165-supportsInterface}.\n */\n function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n return interfaceId == type(IERC165Upgradeable).interfaceId;\n }\n\n /**\n * @dev This empty reserved space is put in place to allow future versions to add new\n * variables without shifting down storage in the inheritance chain.\n * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n */\n uint256[50] private __gap;\n}\n"
"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165Upgradeable {\n /**\n * @dev Returns true if this contract implements the interface defined by\n * `interfaceId`. See the corresponding\n * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n * to learn more about how these ids are created.\n *\n * This function call must use less than 30 000 gas.\n */\n function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n"
![mergify[bot]'s avatar](https://secure.gravatar.com/avatar/e3df20cd7a67969c41a65f03bea54961?s=48&d=identicon "mergify[bot]")