ops: delete legacy ops package

The `ops-bedrock` package will likely be migrated to the `ops` package. Keep around the dockerfile because the builds of the `fault-detector` and the `chain-mon` depend on this dockerfile. We should eventually refactor away this dockerfile and follow the pattern that the other packages use where the dockerfile is in the particular package instead of being outside in its own package.

ops: delete legacy ops package
The `ops-bedrock` package will likely be migrated to the `ops` package. Keep around the dockerfile because the builds of the `fault-detector` and the `chain-mon` depend on this dockerfile. We should eventually refactor away this dockerfile and follow the pattern that the other packages use where the dockerfile is in the particular package instead of being outside in its own package.
34540373 · Mark Tyneway · 233ede59 · 233ede59 · 34540373 · 233ede59
Commit 34540373 authored Jun 09, 2023 by Mark Tyneway
38 changed files
--- a/ops/Makefile
+++ b/ops/Makefile
-DOCKER_COMPOSE_CMD := docker-compose \
-	-f docker-compose.yml
-build:
-	DOCKER_BUILDKIT=1 \
-	$(DOCKER_COMPOSE_CMD) \
-		build
-.PHONY: build
-up: down
-	DOCKER_BUILDKIT=1 \
-	$(DOCKER_COMPOSE_CMD) \
-		up --build --detach
-.PHONY: up
-down:
-	$(DOCKER_COMPOSE_CMD) \
-		down
-.PHONY: down
-ps:
-	$(DOCKER_COMPOSE_CMD) \
-		ps
-.PHONY: ps
-up-metrics: down-metrics
-	DOCKER_BUILDKIT=1 \
-	$(DOCKER_COMPOSE_CMD) \
-		-f docker-compose-metrics.yml \
-		up --build --detach
-.PHONY: up-metrics
-down-metrics:
-	$(DOCKER_COMPOSE_CMD) \
-		-f docker-compose-metrics.yml \
-		down
-.PHONY: down-metrics
-ps-metrics:
-	$(DOCKER_COMPOSE_CMD) \
-		-f docker-compose-metrics.yml \
-		ps
-.PHONY: ps
--- a/ops/README.md
+++ b/ops/README.md
-# docker-compose
+# ops
-The docker-compose project runs a local optimism stack.
+Various operational packages
-## prerequisites
- docker
- docker-compose
- make
-## Building the services
-```bash
-make build
-```
-## Starting and stopping the project
-The base `docker-compose.yml` file will start the required components for a full stack.
-Supplementing the base configuration is an additional metric enabling file, `docker-compose-metrics.yml`. Adding this configuration to the stack will enable metric emission for l2geth and start grafana (for metrics visualisation) and influxdb (for metric collection) instances.
-Also available for testing is the `rpc-proxy` service in the `docker-compose-rpc-proxy.yml` file. It can be used to restrict what RPC methods are allowed to the Sequencer.
-The base stack can be started and stopped with a command like this:
-```
-docker-compose \
-    -f docker-compose.yml \
-    up --build --detach
-```
-*Note*: This generates a large amount of log data which docker stores by default. See [Disk Usage](#disk-usage).
-Also note that Docker Desktop only allocates 2GB of memory by default, which isn't enough to run the docker-compose services reliably.
-To allocate more memory, go to Settings > Resources in the Docker UI and use the slider to change the value (_8GB recommended_). Make sure to click Apply & Restart for the changes to take effect.
-To start the stack with monitoring enabled, just add the metric composition file.
-```
-docker-compose \
-    -f docker-compose.yml \
-    -f docker-compose-metrics.yml \
-    up --build --detach
-```
-Optionally, run a verifier along the rest of the stack. Run a replica with the same command by switching the service name!
-```
-docker-compose
-    -f docker-compose.yml \
-    up --scale \
-    verifier=1 \
-    --build --detach
-```
-A Makefile has been provided for convience. The following targets are available.
- make up
- make down
- make up-metrics
- make down-metrics
-## Turning off L2 Fee Enforcement
-Fees can be turned off at runtime by setting the environment variable
-`ROLLUP_ENFORCE_FEES` to `false`.
-```bash
-ROLLUP_ENFORCE_FEES=false docker-compose up
-```
-## Cross domain communication
-By default, the `message-relayer` service is turned off. This means that
-any tests must manually submit withdrawals. The `message-relayer` will
-automatically look for withdrawals and submit the proofs. To run with the
-`message-relayer` on, use the command:
-```bash
-$ docker-compose up --scale relayer=1
-```
-## Authentication
-Influxdb has authentication disabled.
-Grafana requires a login. The defaults are:
-```
-user: admin
-password: optimism
-```
-## Data persistance
-Grafana data is not currently saved. Any modifications or additions will be lost on container restart.
-InfluxDB is persisting data to a Docker volume.
-**Stopping the project removing the containers will not clear this volume**
-To remove the influxdb and grafana data, run a commands like
-```
-docker volume rm ops_influxdb_data
-docker volume rm ops_grafana_data
-```
-## Accessing Grafana dashboards
-After starting up the project Grafana should be listening on http://localhost:3000.
-Access this link and authenticate as `admin` (see #Authentication)
-From the Dashboard list, select "Geth dashboard".
-## Disk Usage
-The logs generated are in the gigabytes per day range, so you need to be wary of disk exhaustion when running for long periods.
-One way to solve this is to configure `/etc/docker/daemon.json` like this:
-```json
-{
-  "log-driver": "json-file",
-  "log-opts": {
-    "max-size": "10m",
-    "max-file": "3"
-  }
-}
-```
-This configures log rotation with a limit of 10MB per file and storing a maximum of three files (per container). [More details on docker logging configuration](https://docs.docker.com/config/containers/logging/configure/).
-You can also decrease logging by increasing polling intervals:
-```env
-DATA_TRANSPORT_LAYER__POLLING_INTERVAL=100
-```
- [./envs/dtl.env#L7](./envs/dtl.env#L7)
-```env
-ROLLUP_POLL_INTERVAL_FLAG=500ms
-```
- [./envs/geth.env#L8](./envs/geth.env#L8)
--- a/ops/docker-compose-metrics.yml
+++ b/ops/docker-compose-metrics.yml
-version: "3.4"
-services:
-  l2geth:
-    command: ["--metrics", "--metrics.influxdb", "--metrics.influxdb.endpoint", "http://influxdb:8086", "--metrics.influxdb.database", "l2geth"]
-  batch_submitter:
-    environment:
-      BATCH_SUBMITTER_RUN_METRICS_SERVER: "true"
-      BATCH_SUBMITTER_METRICS_PORT: 7300
-      BATCH_SUBMITTER_METRICS_HOSTNAME: 0.0.0.0
-  grafana:
-    image: grafana/grafana:7.5.5
-    env_file:
-      -  ./envs/metrics.env
-    ports:
-      - ${GRAFANA_HTTP_PORT:-3000}:3000
-    volumes:
-      - ./docker/grafana/provisioning/:/etc/grafana/provisioning/:ro
-      - grafana_data:/var/lib/grafana/
-      - grafana_dashboards:/grafana-dashboards:ro
-  influxdb:
-    image: quay.io/influxdb/influxdb:1.6
-    env_file:
-      -  ./envs/metrics.env
-    volumes:
-      - influxdb_data:/var/lib/influxdb
-  prometheus:
-    image: prom/prometheus
-    env_file:
-      -  ./envs/metrics.env
-    volumes:
-      - ./docker/prometheus:/etc/prometheus
-      - prometheus_data:/prometheus
-  dashboard-sync:
-    image: python:3
-    env_file:
-      -  ./envs/metrics.env
-    command:
-      - python
-      - /scripts/dashboard-sync.py
-    volumes:
-      - ./docker/scripts/:/scripts
-      - grafana_dashboards:/grafana-dashboards
-volumes:
-  influxdb_data:
-  grafana_data:
-  grafana_dashboards:
-  prometheus_data:
--- a/ops/docker-compose.yml
+++ b/ops/docker-compose.yml
-version: '3.4'
-x-system-addr-env: &system-addr-env
-  # private key: a6aecc98b63bafb0de3b29ae9964b14acb4086057808be29f90150214ebd4a0f
-  # OK to publish this since it will only ever be used in itests
-  SYSTEM_ADDRESS_0_DEPLOYER: '0xa961b0d6dce82db098cf70a42a14add3ee3db2d5'
-  # private key: 3b8d2345102cce2443acb240db6e87c8edd4bb3f821b17fab8ea2c9da08ea132
-  # OK to publish this since it will only ever be used in itests
-  SYSTEM_ADDRESS_1_DEPLOYER: '0xdfc82d475833a50de90c642770f34a9db7deb725'
-services:
-  # this is a helper service used because there's no official hardhat image
-  l1_chain:
-    image: ethereumoptimism/hardhat-node:${DOCKER_TAG_HARDHAT:-latest}
-    build:
-      context: ./docker/hardhat
-      dockerfile: Dockerfile
-    env_file:
-      - ./envs/l1_chain.env
-    ports:
-      # expose the service to the host for integration testing
-      - ${L1CHAIN_HTTP_PORT:-9545}:8545
-  deployer:
-    depends_on:
-      - l1_chain
-    build:
-      context: ..
-      dockerfile: ./ops/docker/Dockerfile.packages
-      target: deployer
-    image: ethereumoptimism/deployer:${DOCKER_TAG_DEPLOYER:-latest}
-    entrypoint: ./deployer.sh
-    environment:
-      # Env vars for the deployment script.
-      CONTRACTS_RPC_URL: http://l1_chain:8545
-      CONTRACTS_DEPLOYER_KEY: 'ac0974bec39a17e36ba4a6b4d238ff944bacb478cbed5efcae784d7bf4f2ff80'
-      CONTRACTS_TARGET_NETWORK: 'local'
-    ports:
-      # expose the service to the host for getting the contract addrs
-      - ${DEPLOYER_PORT:-8080}:8081
-  dtl:
-    depends_on:
-      - l1_chain
-      - deployer
-      - l2geth
-    build:
-      context: ..
-      dockerfile: ./ops/docker/Dockerfile.packages
-      target: data-transport-layer
-    image: ethereumoptimism/data-transport-layer:${DOCKER_TAG_DATA_TRANSPORT_LAYER:-latest}
-    # override with the dtl script and the env vars required for it
-    entrypoint: ./dtl.sh
-    env_file:
-      - ./envs/dtl.env
-    # set the rest of the env vars for the network whcih do not
-    # depend on the docker-compose setup
-    environment:
-      # used for setting the address manager address
-      URL: http://deployer:8081/addresses.json
-      # connect to the 2 layers
-      DATA_TRANSPORT_LAYER__L1_RPC_ENDPOINT: http://l1_chain:8545
-      DATA_TRANSPORT_LAYER__L2_RPC_ENDPOINT: http://l2geth:8545
-      DATA_TRANSPORT_LAYER__SYNC_FROM_L2: 'true'
-      DATA_TRANSPORT_LAYER__L2_CHAIN_ID: 17
-    ports:
-      - ${DTL_PORT:-7878}:7878
-  l2geth:
-    depends_on:
-      - l1_chain
-      - deployer
-    build:
-      context: ..
-      dockerfile: ./l2geth/Dockerfile
-    image: ethereumoptimism/l2geth:${DOCKER_TAG_L2GETH:-latest}
-    # override with the geth script and the env vars required for it
-    entrypoint: sh ./geth.sh
-    env_file:
-      - ./envs/geth.env
-    environment:
-      <<: *system-addr-env
-      ETH1_HTTP: http://l1_chain:8545
-      ROLLUP_TIMESTAMP_REFRESH: 5s
-      ROLLUP_STATE_DUMP_PATH: http://deployer:8081/state-dump.latest.json
-      # connecting to the DTL
-      ROLLUP_CLIENT_HTTP: http://dtl:7878
-      ETH1_CTC_DEPLOYMENT_HEIGHT: 8
-      RETRIES: 60
-      # no need to keep this secret, only used internally to sign blocks
-      BLOCK_SIGNER_KEY: '6587ae678cf4fc9a33000cdbf9f35226b71dcc6a4684a31203241f9bcfd55d27'
-      BLOCK_SIGNER_ADDRESS: '0x00000398232E2064F896018496b4b44b3D62751F'
-      ROLLUP_ENFORCE_FEES: ${ROLLUP_ENFORCE_FEES:-true}
-      ROLLUP_FEE_THRESHOLD_DOWN: 0.9
-      ROLLUP_FEE_THRESHOLD_UP: 1.1
-    ports:
-      - ${L2GETH_HTTP_PORT:-8545}:8545
-      - ${L2GETH_WS_PORT:-8546}:8546
-  relayer:
-    depends_on:
-      - l1_chain
-      - l2geth
-    deploy:
-      replicas: 0
-    build:
-      context: ..
-      dockerfile: ./ops/docker/Dockerfile.packages
-      target: message-relayer
-    image: ethereumoptimism/message-relayer:${DOCKER_TAG_MESSAGE_RELAYER:-latest}
-    entrypoint: ./relayer.sh
-    environment:
-      MESSAGE_RELAYER__L1_RPC_PROVIDER: http://l1_chain:8545
-      MESSAGE_RELAYER__L2_RPC_PROVIDER: http://l2geth:8545
-      MESSAGE_RELAYER__L1_WALLET: '0xdbda1821b80551c9d65939329250298aa3472ba22feea921c0cf5d620ea67b97'
-      RETRIES: 60
-  fault_detector:
-    depends_on:
-      - l1_chain
-      - l2geth
-    deploy:
-      replicas: 0
-    build:
-      context: ..
-      dockerfile: ./ops/docker/Dockerfile.packages
-      target: fault-detector
-    image: ethereumoptimism/fault-detector:${DOCKER_TAG_FAULT_DETECTOR:-latest}
-    entrypoint: ./detector.sh
-    environment:
-      FAULT_DETECTOR__L1_RPC_PROVIDER: http://l1_chain:8545
-      FAULT_DETECTOR__L2_RPC_PROVIDER: http://l2geth:8545
-      RETRIES: 60
-  verifier:
-    depends_on:
-      - l1_chain
-      - deployer
-      - dtl
-      - l2geth
-    deploy:
-      replicas: 1
-    build:
-      context: ..
-      dockerfile: ./l2geth/Dockerfile
-    image: ethereumoptimism/l2geth:${DOCKER_TAG_L2GETH:-latest}
-    entrypoint: sh ./geth.sh
-    env_file:
-      - ./envs/geth.env
-    environment:
-      <<: *system-addr-env
-      ETH1_HTTP: http://l1_chain:8545
-      SEQUENCER_CLIENT_HTTP: http://l2geth:8545
-      ROLLUP_STATE_DUMP_PATH: http://deployer:8081/state-dump.latest.json
-      ROLLUP_CLIENT_HTTP: http://dtl:7878
-      ROLLUP_BACKEND: 'l1'
-      ETH1_CTC_DEPLOYMENT_HEIGHT: 8
-      RETRIES: 60
-      ROLLUP_VERIFIER_ENABLE: 'true'
-    ports:
-      - ${VERIFIER_HTTP_PORT:-8547}:8545
-      - ${VERIFIER_WS_PORT:-8548}:8546
-  replica:
-    depends_on:
-      - dtl
-      - l2geth
-    deploy:
-      replicas: 1
-    build:
-      context: ..
-      dockerfile: ./l2geth/Dockerfile
-    image: ethereumoptimism/l2geth:${DOCKER_TAG_L2GETH:-latest}
-    entrypoint: sh ./geth.sh
-    env_file:
-      - ./envs/geth.env
-    environment:
-      <<: *system-addr-env
-      ETH1_HTTP: http://l1_chain:8545
-      SEQUENCER_CLIENT_HTTP: http://l2geth:8545
-      ROLLUP_STATE_DUMP_PATH: http://deployer:8081/state-dump.latest.json
-      ROLLUP_CLIENT_HTTP: http://dtl:7878
-      ROLLUP_BACKEND: 'l2'
-      ROLLUP_VERIFIER_ENABLE: 'true'
-      ETH1_CTC_DEPLOYMENT_HEIGHT: 8
-      RETRIES: 60
-    ports:
-      - ${REPLICA_HTTP_PORT:-8549}:8545
-      - ${REPLICA_WS_PORT:-8550}:8546
-  replica_healthcheck:
-    depends_on:
-      - l2geth
-      - replica
-    deploy:
-      replicas: 0
-    build:
-      context: ..
-      dockerfile: ./ops/docker/Dockerfile.packages
-      target: replica-healthcheck
-    image: ethereumoptimism/replica-healthcheck:${DOCKER_TAG_REPLICA_HEALTHCHECK:-latest}
-    environment:
-      HEALTHCHECK__REFERENCE_RPC_PROVIDER: http://l2geth:8545
-      HEALTHCHECK__TARGET_RPC_PROVIDER: http://replica:8545
-    ports:
-      - ${HEALTHCHECK_HTTP_PORT:-7300}:7300
-  gas_oracle:
-    deploy:
-      replicas: 0
-    build:
-      context: ..
-      dockerfile: ./gas-oracle/Dockerfile
-    image: ethereumoptimism/gas-oracle:${DOCKER_TAG_GAS_ORACLE:-latest}
-    environment:
-      GAS_PRICE_ORACLE_ETHEREUM_HTTP_URL: http://l1_chain:8545
-      GAS_PRICE_ORACLE_LAYER_TWO_HTTP_URL: http://l2geth:8545
-      # Default hardhat account 5
-      GAS_PRICE_ORACLE_PRIVATE_KEY: '0x8b3a350cf5c34c9194ca85829a2df0ec3153be0318b5e2d3348e872092edffba'
--- a/ops/docker/ci-builder/CHANGELOG.md
+++ b/ops/docker/ci-builder/CHANGELOG.md
-# @eth-optimism/ci-builder
-## 0.5.0
-### Minor Changes
- 80f2271f5: Update foundry
-### Patch Changes
- 035391a1f: Bump foundry to edf15abd648bb96e2bcee342c1d72ec7d1066cd1
-## 0.4.0
-### Minor Changes
- 05cc935b2: Bump foundry to 2ff99025abade470a795724c10648c800a41025e
-## 0.3.8
-### Patch Changes
- 85dfa9fe2: Add echidna tests for encoding
- ea0540e51: Update the slither version to fix echidna tests
- 0f8fc58ad: Add echidna tests for Burn
-## 0.3.7
-### Patch Changes
- 18d1ce3f4: Require rebuild on null ref
- 1594678e0: Add echidna test for AliasHelper
- 74fd040ce: Pin echidna version
-## 0.3.6
-### Patch Changes
- 011acf411: Add echidna to ci-builder
-## 0.3.5
-### Patch Changes
- c44ff357f: Update foundry in ci-builder
-## 0.3.4
-### Patch Changes
- 8e22c28f: Update geth to 1.10.25
-## 0.3.3
-### Patch Changes
- 3f485627: Pin slither version to 0.9.0
-## 0.3.2
-### Patch Changes
- fcfcf6e7: Remove ugly shell hack
- 009939e0: Fix codecov download step
-## 0.3.1
-### Patch Changes
- 7375a949: Download and verify codecov uploader binary in the ci-builder image
-## 0.3.0
-### Minor Changes
- 25c564bc: Automate foundry build
-## 0.2.4
-### Patch Changes
- c6fab69f: Update foundry to fix a bug in coverage generation
- f7323e0b: Upgrade foundry to support consistent storage layouts
-## 0.2.3
-### Patch Changes
- 9ac88806: Update golang, geth and golangci-lint
-## 0.2.2
-### Patch Changes
- c666fedc: Upgrade to Debian 11
-## 0.2.1
-### Patch Changes
- 9bb6a152: Trigger release to update foundry version
-## 0.2.0
-### Minor Changes
- e8909be0: Fix unbound variable in check_changed script
-  This now uses -z to check if a variable is unbound instead of -n.
-  This should fix the error when the script is being ran on develop.
-## 0.1.2
-### Patch Changes
- 184f13b6: Retrigger release of ci-builder
-## 0.1.1
-### Patch Changes
- 7bf30513: Fix publishing
- a60502f9: Install new version of bash
-## 0.1.0
-### Minor Changes
- 8c121ece: Update foundry in ci builder
-### Patch Changes
- 445efe9d: Use ethereumoptimism/foundry:latest
--- a/ops/docker/ci-builder/Dockerfile
+++ b/ops/docker/ci-builder/Dockerfile
-FROM debian:bullseye-20220822-slim as foundry-build
-SHELL ["/bin/bash", "-c"]
-WORKDIR /opt
-ENV DEBIAN_FRONTEND=noninteractive
-RUN apt-get update && \
-    apt-get install -y curl build-essential git && \
-    curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs > rustup.sh && \
-    chmod +x ./rustup.sh && \
-    ./rustup.sh -y
-WORKDIR /opt/foundry
-# Only diff from upstream docker image is this clone instead
-# of COPY. We select a specific commit to use.
-RUN git clone https://github.com/foundry-rs/foundry.git . \
-    && git checkout da2392e58bb8a7fefeba46b40c4df1afad8ccd22
-RUN source $HOME/.profile && \
-    cargo build --release && \
-    strip /opt/foundry/target/release/forge && \
-    strip /opt/foundry/target/release/cast && \
-    strip /opt/foundry/target/release/anvil
-FROM ethereum/client-go:alltools-v1.10.25 as geth
-FROM ghcr.io/crytic/echidna/echidna:v2.0.4 as echidna-test
-FROM python:3.8.13-slim-bullseye
-ENV GOPATH=/go
-ENV PATH=/usr/local/go/bin:$GOPATH/bin:$PATH
-ENV DEBIAN_FRONTEND=noninteractive
-COPY --from=foundry-build /opt/foundry/target/release/forge /usr/local/bin/forge
-COPY --from=foundry-build /opt/foundry/target/release/cast /usr/local/bin/cast
-COPY --from=foundry-build /opt/foundry/target/release/anvil /usr/local/bin/anvil
-COPY --from=geth /usr/local/bin/abigen /usr/local/bin/abigen
-COPY --from=echidna-test /usr/local/bin/echidna-test /usr/local/bin/echidna-test
-COPY check-changed.sh /usr/local/bin/check-changed
-RUN apt-get update && \
-  apt-get install -y bash curl openssh-client git build-essential ca-certificates jq musl gnupg coreutils && \
-  curl -sL https://deb.nodesource.com/setup_16.x -o nodesource_setup.sh && \
-  curl -sL https://go.dev/dl/go1.19.linux-amd64.tar.gz -o go1.19.linux-amd64.tar.gz && \
-  tar -C /usr/local/ -xzvf go1.19.linux-amd64.tar.gz && \
-  ln -s /usr/local/go/bin/gofmt /usr/local/bin/gofmt && \
-  bash nodesource_setup.sh && \
-  apt-get install -y nodejs && \
-  npm i -g npm@8.11.0 \
-  npm i -g yarn && \
-  npm i -g depcheck && \
-  pip install slither-analyzer==0.9.1 && \
-  go install gotest.tools/gotestsum@latest && \
-  curl -sSfL https://raw.githubusercontent.com/golangci/golangci-lint/master/install.sh | sh -s -- -b $(go env GOPATH)/bin v1.48.0 && \
-  curl -fLSs https://raw.githubusercontent.com/CircleCI-Public/circleci-cli/master/install.sh | bash && \
-  chmod +x /usr/local/bin/check-changed
-RUN echo "downloading solidity compilers" && \
-  curl -o solc-linux-amd64-v0.5.17+commit.d19bba13 -sL https://binaries.soliditylang.org/linux-amd64/solc-linux-amd64-v0.5.17+commit.d19bba13 && \
-  curl -o solc-linux-amd64-v0.8.9+commit.e5eed63a -sL https://binaries.soliditylang.org/linux-amd64/solc-linux-amd64-v0.8.9+commit.e5eed63a  && \
-  curl -o solc-linux-amd64-v0.8.10+commit.fc410830 -sL https://binaries.soliditylang.org/linux-amd64/solc-linux-amd64-v0.8.10+commit.fc410830 && \
-  curl -o solc-linux-amd64-v0.8.12+commit.f00d7308 -sL https://binaries.soliditylang.org/linux-amd64/solc-linux-amd64-v0.8.12+commit.f00d7308 && \
-  echo "verifying checksums" && \
-  (echo "c35ce7a4d3ffa5747c178b1e24c8541b2e5d8a82c1db3719eb4433a1f19e16f3 solc-linux-amd64-v0.5.17+commit.d19bba13" | sha256sum --check --status - || exit 1) && \
-  (echo "f851f11fad37496baabaf8d6cb5c057ca0d9754fddb7a351ab580d7fd728cb94 solc-linux-amd64-v0.8.9+commit.e5eed63a"  | sha256sum --check --status - || exit 1) && \
-  (echo "c7effacf28b9d64495f81b75228fbf4266ac0ec87e8f1adc489ddd8a4dd06d89 solc-linux-amd64-v0.8.10+commit.fc410830" | sha256sum --check --status - || exit 1) && \
-  (echo "556c3ec44faf8ff6b67933fa8a8a403abe82c978d6e581dbfec4bd07360bfbf3 solc-linux-amd64-v0.8.12+commit.f00d7308" | sha256sum --check --status - || exit 1) && \
-  echo "caching compilers" && \
-  mkdir -p ~/.cache/hardhat-nodejs/compilers/linux-amd64 && \
-  cp solc-linux-amd64-v0.5.17+commit.d19bba13 ~/.cache/hardhat-nodejs/compilers/linux-amd64/ && \
-  cp solc-linux-amd64-v0.8.9+commit.e5eed63a  ~/.cache/hardhat-nodejs/compilers/linux-amd64/ && \
-  cp solc-linux-amd64-v0.8.10+commit.fc410830 ~/.cache/hardhat-nodejs/compilers/linux-amd64/ && \
-  cp solc-linux-amd64-v0.8.12+commit.f00d7308 ~/.cache/hardhat-nodejs/compilers/linux-amd64/ && \
-  mkdir -p ~/.svm/0.5.17 && \
-  cp solc-linux-amd64-v0.5.17+commit.d19bba13 ~/.svm/0.5.17/solc-0.5.17 && \
-  mkdir -p ~/.svm/0.8.9  && \
-  cp solc-linux-amd64-v0.8.9+commit.e5eed63a  ~/.svm/0.8.9/solc-0.8.9   && \
-  mkdir -p ~/.svm/0.8.10 && \
-  cp solc-linux-amd64-v0.8.10+commit.fc410830 ~/.svm/0.8.10/solc-0.8.10 && \
-  mkdir -p ~/.svm/0.8.12 && \
-  cp solc-linux-amd64-v0.8.12+commit.f00d7308 ~/.svm/0.8.12/solc-0.8.12 && \
-  rm solc-linux-amd64-v0.5.17+commit.d19bba13 && \
-  rm solc-linux-amd64-v0.8.9+commit.e5eed63a && \
-  rm solc-linux-amd64-v0.8.10+commit.fc410830 && \
-  rm solc-linux-amd64-v0.8.12+commit.f00d7308
-RUN echo "downloading and verifying Codecov uploader" && \
-  curl https://keybase.io/codecovsecurity/pgp_keys.asc | gpg --no-default-keyring --keyring trustedkeys.gpg --import && \
-  curl -Os "https://uploader.codecov.io/latest/linux/codecov" && \
-  curl -Os "https://uploader.codecov.io/latest/linux/codecov.SHA256SUM" && \
-  curl -Os "https://uploader.codecov.io/latest/linux/codecov.SHA256SUM.sig" && \
-  gpgv codecov.SHA256SUM.sig codecov.SHA256SUM && \
-  shasum -a 256 -c codecov.SHA256SUM || sha256sum -c codecov.SHA256SUM && \
-  cp codecov /usr/local/bin/codecov && \
-  chmod +x /usr/local/bin/codecov  && \
-  rm codecov
-RUN echo "downloading mockery tool" && \
-  mkdir -p mockery-tmp-dir && \
-  curl -o mockery-tmp-dir/mockery.tar.gz -sL https://github.com/vektra/mockery/releases/download/v2.28.1/mockery_2.28.1_Linux_x86_64.tar.gz && \
-  tar -xzvf mockery-tmp-dir/mockery.tar.gz -C mockery-tmp-dir && \
-  cp mockery-tmp-dir/mockery /usr/local/bin/mockery && \
-  chmod +x /usr/local/bin/mockery && \
-  rm -rf mockery-tmp-dir
--- a/ops/docker/ci-builder/check-changed.sh
+++ b/ops/docker/ci-builder/check-changed.sh
-#!/usr/bin/env -S bash -euET -o pipefail -O inherit_errexit
-# Usage: check-changed.sh <diff-pattern>.
-#
-# This script compares the files changed in the <diff-pattern> to the git diff,
-# and writes TRUE or FALSE to stdout if the diff matches/does not match. It is
-# used by CircleCI jobs to determine if they need to run.
-echoerr() { echo "$@" 1>&2; }
-# Check if this is a CircleCI PR.
-if [[ -z ${CIRCLE_PULL_REQUEST+x} ]]; then
-	# CIRCLE_PULL_REQUEST is unbound here
-	# Non-PR builds always require a rebuild.
-	echoerr "Not a PR build, requiring a total rebuild."
-	echo "TRUE"
-else
-	# CIRCLE_PULL_REQUEST is bound here
-	PACKAGE=$1
-	# Craft the URL to the GitHub API. The access token is optional for the monorepo since it's an open-source repo.
-	GITHUB_API_URL="https://api.github.com/repos/ethereum-optimism/optimism/pulls/${CIRCLE_PULL_REQUEST/https:\/\/github.com\/ethereum-optimism\/optimism\/pull\//}"
-	echoerr "GitHub URL:"
-	echoerr "$GITHUB_API_URL"
-	# Grab the PR's base ref using the GitHub API.
-	PR=$(curl -H "Authorization: token $GITHUB_ACCESS_TOKEN" -H "Accept: application/vnd.github.v3+json" --retry 3 --retry-delay 1 -s "$GITHUB_API_URL")
-	echoerr "PR data:"
-	echoerr "$PR"
-	REF=$(echo "$PR" | jq -r ".base.ref")
-	if [ "$REF" = "master" ]; then
-		echoerr "Base ref is master, requiring a total rebuild."
-		echo "TRUE"
-		exit 0
-	fi
-	if [ "$REF" = "null" ]; then
-		echoerr "Bad ref, requiring a total rebuild."
-		echo "TRUE"
-		exit 1
-	fi
-	echoerr "Base Ref:     $REF"
-	echoerr "Base Ref SHA: $(git show-branch --sha1-name "$REF")"
- 	echoerr "Curr Ref:     $(git rev-parse --short HEAD)"
- 	DIFF=$(git diff --dirstat=files,0 "$REF...HEAD")
- 	# Compare HEAD to the PR's base ref, stripping out the change percentages that come with git diff --dirstat.
- 	# Pass in the diff pattern to grep, and echo TRUE if there's a match. False otherwise.
- 	(echo "$DIFF" | sed 's/^[ 0-9.]\+% //g' | grep -q -E "$PACKAGE" && echo "TRUE") || echo "FALSE"
-fi
--- a/ops/docker/foundry/CHANGELOG.md
+++ b/ops/docker/foundry/CHANGELOG.md
-# @eth-optimism/foundry
-## 0.2.0
-### Minor Changes
- 05cc935b2: Bump foundry to 2ff99025abade470a795724c10648c800a41025e
-## 0.1.3
-### Patch Changes
- c6fab69f: Update foundry to fix a bug in coverage generation
- f7323e0b: Upgrade foundry to support consistent storage layouts
-## 0.1.2
-### Patch Changes
- e736a4d0: Update to 64fe4acc97e6d76551cea7598c201f05ecd65639
-## 0.1.1
-### Patch Changes
- 921653f8: Bump foundry to 3c49efe58ca4bdeec4729490501da06914446405
-## 0.1.0
-### Minor Changes
- 5ae9c133: Initial release, pin to b7b1ec471bdd38221773e1a569dc4f20297bd7db
-### Patch Changes
- d4de18ea: Use alpine:3.14
--- a/ops/docker/foundry/Dockerfile
+++ b/ops/docker/foundry/Dockerfile
-from alpine:3.14 as build-environment
-WORKDIR /opt
-RUN apk add clang lld curl build-base linux-headers git \
-    && curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs > rustup.sh \
-    && chmod +x ./rustup.sh \
-    && ./rustup.sh -y
-WORKDIR /opt/foundry
-# Only diff from upstream docker image is this clone instead
-# of COPY. We select a specific commit to use.
-RUN git clone https://github.com/foundry-rs/foundry.git . \
-    && git checkout 2ff99025abade470a795724c10648c800a41025e
-RUN source $HOME/.profile && cargo build --release \
-    && strip /opt/foundry/target/release/forge \
-    && strip /opt/foundry/target/release/cast \
-    && strip /opt/foundry/target/release/anvil
-from alpine:3.14 as foundry-client
-ENV GLIBC_KEY=https://alpine-pkgs.sgerrand.com/sgerrand.rsa.pub
-ENV GLIBC_KEY_FILE=/etc/apk/keys/sgerrand.rsa.pub
-ENV GLIBC_RELEASE=https://github.com/sgerrand/alpine-pkg-glibc/releases/download/2.35-r0/glibc-2.35-r0.apk
-RUN apk add linux-headers gcompat
-RUN wget -q -O ${GLIBC_KEY_FILE} ${GLIBC_KEY} \
-    && wget -O glibc.apk ${GLIBC_RELEASE} \
-    && apk add glibc.apk --force
-COPY --from=build-environment /opt/foundry/target/release/forge /usr/local/bin/forge
-COPY --from=build-environment /opt/foundry/target/release/cast /usr/local/bin/cast
-COPY --from=build-environment /opt/foundry/target/release/anvil /usr/local/bin/anvil
-ENTRYPOINT ["/bin/sh", "-c"]
--- a/ops/docker/foundry/package.json
+++ b/ops/docker/foundry/package.json
-{
-  "name": "@eth-optimism/foundry",
-  "version": "0.2.0",
-  "scripts": {},
-  "license": "MIT",
-  "dependencies": {}
-}
--- a/ops/docker/grafana/provisioning/dashboards/config.yml
+++ b/ops/docker/grafana/provisioning/dashboards/config.yml
-apiVersion: 1
-providers:
-  - name: dashboards
-    type: file
-    updateIntervalSeconds: 30
-    options:
-      path: /grafana-dashboards
-      foldersFromFilesStructure: true
\ No newline at end of file
--- a/ops/docker/grafana/provisioning/datasources/influxdb.yml
+++ b/ops/docker/grafana/provisioning/datasources/influxdb.yml
-apiVersion: 1
-datasources:
-  - name: InfluxDB
-    type: influxdb
-    access: proxy
-    orgId: 1
-    database: l2geth
-    url: http://influxdb:8086
-    version: 1
-    editable: false
--- a/ops/docker/grafana/provisioning/datasources/prometheus.yml
+++ b/ops/docker/grafana/provisioning/datasources/prometheus.yml
-apiVersion: 1
-datasources:
-  - name: Prometheus
-    type: prometheus
-    access: proxy
-    orgId: 1
-    url: http://prometheus:9090
-    version: 1
-    editable: false
\ No newline at end of file
--- a/ops/docker/hardhat/.dockerenv
+++ b/ops/docker/hardhat/.dockerenv
--- a/ops/docker/hardhat/CHANGELOG.md
+++ b/ops/docker/hardhat/CHANGELOG.md
-# @eth-optimism/hardhat-node
-## 0.2.4
-### Patch Changes
- 805acded4: Bump hardhat to 2.12.2
-## 0.2.3
-### Patch Changes
- 6c238212d: Trigger a release of the hardhat-node
-## 0.2.2
-### Patch Changes
- 8333f0f2c: Upgrade dependencies, add fork chain ID support
-## 0.2.1
-### Patch Changes
- 839f784f: Fixes CI to properly release the hardhat-node
-## 0.2.0
-### Minor Changes
- 587a7d0d: Correct configuration file behavior
-## 0.1.5
-### Patch Changes
- 29ff7462: Revert es target back to 2017
-## 0.1.4
-### Patch Changes
- 847a6338: Bump to hardhat@2.9.1
-## 0.1.3
-### Patch Changes
- 88601cb7: Refactored Dockerfiles
-## 0.1.2
-### Patch Changes
- 72a325f6: Add fork mode config to ethereumoptimism/hardhat docker image
- 50e2f6ff: Update to hardhat@2.7.0
-## 0.1.1
-### Patch Changes
- 57d5b8f9: Build docker images with node.js version 16
-## 0.1.0
-### Minor Changes
- 81ccd6e4: `regenesis/0.5.0` release
-### Patch Changes
- eba5f50c: Create `ethereumoptimism/hardhat-node` docker image
--- a/ops/docker/hardhat/Dockerfile
+++ b/ops/docker/hardhat/Dockerfile
-FROM node:16-alpine
-# bring in the config files for installing deps
-COPY [ \
-    "package.json", \
-    "/hardhat/" \
-]
-# install deps
-WORKDIR /hardhat
-RUN yarn install && yarn cache clean
-# bring in dockerenv so that hardhat launches with host = 0.0.0.0 instead of 127.0.0.1
-# so that it's accessible from other boxes as well
-# https://github.com/nomiclabs/hardhat/blob/bd7f4b93ed3724f3473052bebe4f8b5587e8bfa8/packages/hardhat-core/src/builtin-tasks/node.ts#L275-L287
-COPY [ ".dockerenv" , "/hardhat/" ]
-# bring in the scripts we'll be using
-COPY [ "hardhat.config.js" , "/hardhat/" ]
-EXPOSE 8545
-# runs the script (assumes that the `CONTRACT` and `ARGS` are passed as args to `--env`)
-CMD ["yarn", "start"]
--- a/ops/docker/hardhat/hardhat.config.js
+++ b/ops/docker/hardhat/hardhat.config.js
-require('dotenv').config()
-const isForkModeEnabled = !!process.env.FORK_URL
-const forkUrl = process.env.FORK_URL
-const forkStartingBlock =
-  parseInt(process.env.FORK_STARTING_BLOCK, 10) || undefined
-const gasPrice = parseInt(process.env.GAS_PRICE, 10) || 0
-const config = {
-  networks: {
-    hardhat: {
-      gasPrice,
-      initialBaseFeePerGas: 0,
-      chainId: process.env.FORK_CHAIN_ID ? Number(process.env.FORK_CHAIN_ID) : 31337
-    },
-  },
-  analytics: { enabled: false },
-}
-if (isForkModeEnabled) {
-  console.log(`Running hardhat in a fork mode! URL: ${forkUrl}`)
-  if (forkStartingBlock) {
-    console.log(`Starting block: ${forkStartingBlock}`)
-  }
-  config.networks.hardhat.forking = {
-    url: forkUrl,
-    blockNumber: forkStartingBlock,
-  }
-} else {
-  console.log('Running with a fresh state...')
-}
-module.exports = config
--- a/ops/docker/hardhat/package.json
+++ b/ops/docker/hardhat/package.json
-{
-  "name": "@eth-optimism/hardhat-node",
-  "version": "0.2.4",
-  "scripts": {
-    "start": "hardhat node --network hardhat"
-  },
-  "license": "MIT",
-  "dependencies": {
-    "dotenv": "^10.0.0",
-    "hardhat": "^2.9.6"
-  }
-}
--- a/ops/docker/prometheus/prometheus.yml
+++ b/ops/docker/prometheus/prometheus.yml
-# my global config
-global:
-  scrape_interval:     15s # Set the scrape interval to every 15 seconds. Default is every 1 minute.
-  evaluation_interval: 15s # Evaluate rules every 15 seconds. The default is every 1 minute.
-  # scrape_timeout is set to the global default (10s).
-# Alertmanager configuration
-alerting:
-  alertmanagers:
-  - static_configs:
-    - targets:
-      # - alertmanager:9093
-# Load rules once and periodically evaluate them according to the global 'evaluation_interval'.
-rule_files:
-  # - "first_rules.yml"
-  # - "second_rules.yml"
-# A scrape configuration containing exactly one endpoint to scrape:
-# Here it's Prometheus itself.
-scrape_configs:
-  - job_name: 'data-transport-layer'
-    static_configs:
-    - targets: ['dtl:7878']
-  - job_name: 'batch-submitter'
-    static_configs:
-    - targets: ['batch_submitter:7300']
--- a/ops/docker/scripts/dashboard-sync.py
+++ b/ops/docker/scripts/dashboard-sync.py
-import os
-import urllib.request
-dashboard_list=[
-  {
-   'name': 'Single Geth',
-   'filename': 'single_geth.json',
-   'url': 'https://grafana.com/api/dashboards/13877/revisions/1/download'
-  }
-]
-dashboard_path="/grafana-dashboards"
-GF_SECURITY_ADMIN_PASSWORD = os.environ.get('GF_SECURITY_ADMIN_PASSWORD')
-if GF_SECURITY_ADMIN_PASSWORD is None:
-  print('GF_SECURITY_ADMIN_PASSWORD env value is missing, exiting.')
-  sys.exit(1)
-if (not os.path.exists(dashboard_path)) or (not os.path.isdir(dashboard_path)) or (not os.access(dashboard_path, os.W_OK)):
-  print('Dashboard path %s is not writable, exiting'.format(dashboard_path))
-  sys.exit(1)
-for dashboard in dashboard_list:
-  with urllib.request.urlopen(dashboard['url']) as f:
-    response = f.read()
-    decoded_html = response.decode('utf-8')
-    data = decoded_html.replace('${DS_INFLUXDB}', 'InfluxDB')
-    d_file = open(os.path.join(dashboard_path, dashboard['filename']),'w')
-    d_file.write(data)
-    d_file.close()
--- a/ops/envs/dtl.env
+++ b/ops/envs/dtl.env
-DATA_TRANSPORT_LAYER__SYNC_FROM_L1=true
-DATA_TRANSPORT_LAYER__SYNC_FROM_L2=false
-DATA_TRANSPORT_LAYER__DB_PATH=/db
-DATA_TRANSPORT_LAYER__SERVER_PORT=7878
-DATA_TRANSPORT_LAYER__TRANSACTIONS_PER_POLLING_INTERVAL=1000
-DATA_TRANSPORT_LAYER__CONFIRMATIONS=0
-DATA_TRANSPORT_LAYER__POLLING_INTERVAL=100
-DATA_TRANSPORT_LAYER__LOGS_PER_POLLING_INTERVAL=2000
-DATA_TRANSPORT_LAYER__DANGEROUSLY_CATCH_ALL_ERRORS=true
-DATA_TRANSPORT_LAYER__SERVER_HOSTNAME=0.0.0.0
-DATA_TRANSPORT_LAYER__L1_START_HEIGHT=1
-DATA_TRANSPORT_LAYER__ADDRESS_MANAGER=
-DATA_TRANSPORT_LAYER__L1_RPC_ENDPOINT=
-DATA_TRANSPORT_LAYER__L2_RPC_ENDPOINT=
-DATA_TRANSPORT_LAYER__L2_CHAIN_ID=
--- a/ops/envs/geth.env
+++ b/ops/envs/geth.env
-ETH1_HTTP=
-ETH1_CTC_DEPLOYMENT_HEIGHT=
-ETH1_SYNC_SERVICE_ENABLE=true
-ETH1_CONFIRMATION_DEPTH=0
-ROLLUP_CLIENT_HTTP=
-ROLLUP_POLL_INTERVAL_FLAG=500ms
-ROLLUP_ENABLE_L2_GAS_POLLING=true
-RPC_ENABLE=true
-RPC_ADDR=0.0.0.0
-RPC_PORT=8545
-RPC_API=eth,net,rollup,web3,debug
-RPC_CORS_DOMAIN=*
-RPC_VHOSTS=*
-WS=true
-WS_ADDR=0.0.0.0
-WS_PORT=8546
-WS_API=eth,net,rollup,web3
-WS_ORIGINS=*
-CHAIN_ID=17
-DATADIR=/root/.ethereum
-GASPRICE=0
-GCMODE=archive
-IPC_DISABLE=true
-NETWORK_ID=17
-NO_USB=true
-NO_DISCOVER=true
-TARGET_GAS_LIMIT=15000000
-USING_OVM=true
-BLOCK_SIGNER_KEY=6587ae678cf4fc9a33000cdbf9f35226b71dcc6a4684a31203241f9bcfd55d27
-BLOCK_SIGNER_ADDRESS=0x00000398232E2064F896018496b4b44b3D62751F
-L2_BLOCK_GAS_LIMIT=15000000
--- a/ops/envs/indexer.env
+++ b/ops/envs/indexer.env
-BUILD_ENV=development
-ETH_NETWORK_NAME=clique
-LOG_LEVEL=debug
-L1_ETH_RPC=http://127.0.0.1:7545
-L2_ETH_RPC=http://127.0.0.1:4545
-L1_STANDARD_BRIDGE_ADDRESS=
-L2_STANDARD_BRIDGE_ADDRESS=
-L2_GENESIS_BLOCK_HASH=
-INDEXER_START_BLOCK_NUMBER=
-INDEXER_START_BLOCK_HASH=
-INDEXER_DB_HOST=localhost
-INDEXER_DB_PORT=5432
-INDEXER_DB_USER=postgres
-INDEXER_DB_PASSWORD=
-INDEXER_DB_NAME=indexer
--- a/ops/envs/l1_chain.env
+++ b/ops/envs/l1_chain.env
-FORK_URL=
-FORK_STARTING_BLOCK=
--- a/ops/envs/metrics.env
+++ b/ops/envs/metrics.env
-GF_SECURITY_ADMIN_PASSWORD=optimism
-INFLUXDB_HTTP_AUTH_ENABLED=false
-INFLUXDB_DB=l2geth
--- a/ops/scripts/build-ci.sh
+++ b/ops/scripts/build-ci.sh
-# Builds an image using Buildx. Usage:
-# build <name> <tag> <dockerfile> <context>
-function build() {
-    echo "Building $1."
-    echo "Tag: $2"
-    echo "Dockerfile: $3"
-    echo "Context: $4"
-    docker buildx build \
-        --tag "$2" \
-        --cache-from "type=local,src=/tmp/.buildx-cache/$1" \
-        --cache-to="type=local,dest=/tmp/.buildx-cache-new/$1" \
-        --file "$3" \
-        --load "$4" \
-        &
-}
-mkdir -p /tmp/.buildx-cache-new
-build l2geth "ethereumoptimism/l2geth:latest" "./l2geth/Dockerfile" .
-build l1chain "ethereumoptimism/hardhat-node:latest" "./ops/docker/hardhat/Dockerfile" ./ops/docker/hardhat
-wait
-build deployer "ethereumoptimism/deployer:latest" "./ops/docker/Dockerfile.deployer" .
-build dtl "ethereumoptimism/data-transport-layer:latest" "./ops/docker/Dockerfile.data-transport-layer" .
-build relayer "ethereumoptimism/message-relayer:latest" "./ops/docker/Dockerfile.message-relayer" .
-build relayer "ethereumoptimism/fault-detector:latest" "./ops/docker/Dockerfile.fault-detector" .
-wait
--- a/ops/scripts/ci-docker-tag-op-stack-release.sh
+++ b/ops/scripts/ci-docker-tag-op-stack-release.sh
-#!/usr/bin/env bash
-set -euo pipefail
-DOCKER_REPO=$1
-GIT_TAG=$2
-GIT_SHA=$3
-IMAGE_NAME=$(echo "$GIT_TAG" | grep -Eow '^(fault-detector|proxyd|indexer|op-[a-z0-9\-]*)' || true)
-if [ -z "$IMAGE_NAME" ]; then
-  echo "image name could not be parsed from git tag '$GIT_TAG'"
-  exit 1
-fi
-IMAGE_TAG=$(echo "$GIT_TAG" | grep -Eow 'v.*' || true)
-if [ -z "$IMAGE_TAG" ]; then
-  echo "image tag could not be parsed from git tag '$GIT_TAG'"
-  exit 1
-fi
-SOURCE_IMAGE_TAG="$DOCKER_REPO/$IMAGE_NAME:$GIT_SHA"
-TARGET_IMAGE_TAG="$DOCKER_REPO/$IMAGE_NAME:$IMAGE_TAG"
-TARGET_IMAGE_TAG_LATEST="$DOCKER_REPO/$IMAGE_NAME:latest"
-echo "Checking if docker images exist for '$IMAGE_NAME'"
-echo ""
-tags=$(gcloud container images list-tags "$DOCKER_REPO/$IMAGE_NAME" --limit 1 --format json)
-if [ "$tags" = "[]" ]; then
-  echo "No existing docker images were found for '$IMAGE_NAME'. The code tagged with '$GIT_TAG' may not have an associated dockerfile or docker build job."
-  echo "If this service has a dockerfile, add a docker-publish job for it in the circleci config."
-  echo ""
-  echo "Exiting"
-  exit 0
-fi
-echo "Tagging $SOURCE_IMAGE_TAG with '$IMAGE_TAG'"
-gcloud container images add-tag -q "$SOURCE_IMAGE_TAG" "$TARGET_IMAGE_TAG"
-# Do not tag with latest if the release is a release candidate.
-if [[ "$IMAGE_TAG" == *"rc"* ]]; then
-  echo "Not tagging with 'latest' because the release is a release candidate."
-  exit 0
-fi
-echo "Tagging $SOURCE_IMAGE_TAG with 'latest'"
-gcloud container images add-tag -q "$SOURCE_IMAGE_TAG" "$TARGET_IMAGE_TAG_LATEST"
--- a/ops/scripts/ci-versions.js
+++ b/ops/scripts/ci-versions.js
-const os = require('os')
-// this script unbundles the published packages output
-// from changesets action to a key-value pair to be used
-// with our publishing CI workflow
-data = process.argv[2]
-data = JSON.parse(data)
-for (const i of data) {
-  const name = i.name.replace("@eth-optimism/", "")
-  const version = i.version
-  process.stdout.write(`::set-output name=${name}::${version}` + os.EOL)
-}
--- a/ops/scripts/deployer.sh
+++ b/ops/scripts/deployer.sh
-#!/bin/bash
-set -euo
-RETRIES=${RETRIES:-20}
-JSON='{"jsonrpc":"2.0","id":0,"method":"net_version","params":[]}'
-if [ -z "$CONTRACTS_RPC_URL" ]; then
-    echo "Must specify \$CONTRACTS_RPC_URL."
-    exit 1
-fi
-# wait for the base layer to be up
-curl \
-    --fail \
-    --show-error \
-    --silent \
-    -H "Content-Type: application/json" \
-    --retry-connrefused \
-    --retry $RETRIES \
-    --retry-delay 1 \
-    -d $JSON \
-    $CONTRACTS_RPC_URL > /dev/null
-echo "Connected to L1."
-echo "Building deployment command."
-DEPLOY_CMD="npx hardhat deploy --network $CONTRACTS_TARGET_NETWORK"
-echo "Deploying contracts. Deployment command:"
-echo "$DEPLOY_CMD"
-eval "$DEPLOY_CMD"
-echo "Building addresses.json."
-export ADDRESS_MANAGER_ADDRESS=$(cat "./deployments/$CONTRACTS_TARGET_NETWORK/Lib_AddressManager.json" | jq -r .address)
-# First, create two files. One of them contains a list of addresses, the other contains a list of contract names.
-find "./deployments/$CONTRACTS_TARGET_NETWORK" -maxdepth 1 -name '*.json' | xargs cat | jq -r '.address' > addresses.txt
-find "./deployments/$CONTRACTS_TARGET_NETWORK" -maxdepth 1 -name '*.json' | sed -e "s/.\/deployments\/$CONTRACTS_TARGET_NETWORK\///g" | sed -e 's/.json//g' > filenames.txt
-# Start building addresses.json.
-echo "{" >> addresses.json
-# Zip the two files describe above together, then, switch their order and format as JSON.
-paste addresses.txt filenames.txt | sed -e "s/^\([^ ]\+\)\s\+\([^ ]\+\)/\"\2\": \"\1\",/" >> addresses.json
-# Add the address manager alias.
-echo "\"AddressManager\": \"$ADDRESS_MANAGER_ADDRESS\"" >> addresses.json
-# End addresses.json
-echo "}" >> addresses.json
-echo "Built addresses.json. Content:"
-jq . addresses.json
-echo "Building dump file."
-npx hardhat take-dump --network $CONTRACTS_TARGET_NETWORK
-mv addresses.json ./genesis
-cp ./genesis/$CONTRACTS_TARGET_NETWORK.json ./genesis/state-dump.latest.json
-# expose the deployments
-cp -rf ./deployments ./genesis/deployments
-# service the addresses and dumps
-echo "Starting server."
-python3 -m http.server \
-    --bind "0.0.0.0" 8081 \
-    --directory ./genesis
--- a/ops/scripts/detector.sh
+++ b/ops/scripts/detector.sh
-#!/bin/bash
-set -e
-RETRIES=${RETRIES:-60}
-# waits for l2geth to be up
-curl \
-    --fail \
-    --show-error \
-    --silent \
-    --output /dev/null \
-    --retry-connrefused \
-    --retry $RETRIES \
-    --retry-delay 1 \
-    $FAULT_DETECTOR__L2_RPC_PROVIDER
-# go
-exec yarn start
--- a/ops/scripts/dtl.sh
+++ b/ops/scripts/dtl.sh
-#!/bin/bash
-set -e
-RETRIES=${RETRIES:-60}
-if [[ ! -z "$URL" ]]; then
-    # get the addrs from the URL provided
-    ADDRESSES=$(curl --fail --show-error --silent --retry-connrefused --retry $RETRIES --retry-delay 5 $URL)
-    # set the env
-    export DATA_TRANSPORT_LAYER__ADDRESS_MANAGER=$(echo $ADDRESSES | jq -r '.AddressManager')
-fi
-# go
-exec node dist/src/services/run.js
--- a/ops/scripts/geth.sh
+++ b/ops/scripts/geth.sh
-#!/bin/sh
-# FIXME: Cannot use set -e since bash is not installed in Dockerfile
-# set -e
-RETRIES=${RETRIES:-40}
-VERBOSITY=${VERBOSITY:-6}
-# get the genesis file from the deployer
-curl \
-    --fail \
-    --show-error \
-    --silent \
-    --retry-connrefused \
-    --retry-all-errors \
-    --retry $RETRIES \
-    --retry-delay 5 \
-    $ROLLUP_STATE_DUMP_PATH \
-    -o genesis.json
-# wait for the dtl to be up, else geth will crash if it cannot connect
-curl \
-    --fail \
-    --show-error \
-    --silent \
-    --output /dev/null \
-    --retry-connrefused \
-    --retry $RETRIES \
-    --retry-delay 1 \
-    $ROLLUP_CLIENT_HTTP
-# import the key that will be used to locally sign blocks
-# this key does not have to be kept secret in order to be secure
-# we use an insecure password ("pwd") to lock/unlock the password
-echo "Importing private key"
-echo $BLOCK_SIGNER_KEY > key.prv
-echo "pwd" > password
-geth account import --password ./password ./key.prv
-# initialize the geth node with the genesis file
-echo "Initializing Geth node"
-geth --verbosity="$VERBOSITY" "$@" init genesis.json
-# start the geth node
-echo "Starting Geth node"
-exec geth \
-  --verbosity="$VERBOSITY" \
-  --password ./password \
-  --allow-insecure-unlock \
-  --unlock $BLOCK_SIGNER_ADDRESS \
-  --mine \
-  --miner.etherbase $BLOCK_SIGNER_ADDRESS \
-  "$@"
--- a/ops/scripts/integration-tests.sh
+++ b/ops/scripts/integration-tests.sh
-#!/bin/bash
-set -e
-RETRIES=${RETRIES:-60}
-JSON='{"jsonrpc":"2.0","id":0,"method":"rollup_getInfo","params":[]}'
-if [[ ! -z "$URL" ]]; then
-    # get the addrs from the URL provided
-    ADDRESSES=$(curl --fail --show-error --silent --retry-connrefused --retry $RETRIES --retry-delay 5 $URL)
-    export ADDRESS_MANAGER=$(echo $ADDRESSES | jq -r '.AddressManager')
-fi
-# wait for the sequencer to be up
-curl \
-    --silent \
-    --fail \
-    --show-error \
-    -H "Content-Type: application/json" \
-    --retry-connrefused \
-    --retry $RETRIES \
-    --retry-delay 3 \
-    -d $JSON \
-    --output /dev/null \
-    $L2_URL
-npx hardhat test --network optimism --no-compile "$@"
--- a/ops/scripts/relayer.sh
+++ b/ops/scripts/relayer.sh
-#!/bin/bash
-set -e
-RETRIES=${RETRIES:-60}
-# waits for l2geth to be up
-curl \
-    --fail \
-    --show-error \
-    --silent \
-    --output /dev/null \
-    --retry-connrefused \
-    --retry $RETRIES \
-    --retry-delay 1 \
-    $MESSAGE_RELAYER__L2_RPC_PROVIDER
-# go
-exec yarn start
--- a/ops/scripts/stats.sh
+++ b/ops/scripts/stats.sh
-#!/bin/bash
-# set up the stats file
-mkdir ~/logs
-touch ~/logs/stats.txt
-while true; do
-  {
-    echo "$(date) ----------------";
-    echo "total memory usage --------------------------";
-    free -m;
-    echo "docker stats --------------------------------";
-    docker stats --no-stream;
-    echo "memory munchers -----------------------------";
-    ps aux --sort=-%mem | head;
-  } >> ~/logs/stats.txt
-  sleep 1;
-done
--- a/ops/scripts/tag-bedrock-go-modules.sh
+++ b/ops/scripts/tag-bedrock-go-modules.sh
-#!/usr/bin/env bash
-BEDROCK_TAGS_REMOTE="$1"
-VERSION="$2"
-if [ -z "$VERSION" ]; then
-	echo "You must specify a version."
-	exit 0
-fi
-FIRST_CHAR=$(printf '%s' "$VERSION" | cut -c1)
-if [ "$FIRST_CHAR" != "v" ]; then
-	echo "Tag must start with v."
-	exit 0
-fi
-git tag "op-bindings/$VERSION"
-git tag "op-service/$VERSION"
-git push $BEDROCK_TAGS_REMOTE "op-bindings/$VERSION"
-git push $BEDROCK_TAGS_REMOTE "op-service/$VERSION"
-cd op-chain-ops
-go get github.com/ethereum-optimism/optimism/op-bindings@$VERSION
-go get github.com/ethereum-optimism/optimism/op-service@$VERSION
-go mod tidy
-git add .
-git commit -am 'chore: Upgrade op-chain-ops dependencies'
-git tag "op-chain-ops/$VERSION"
-git push $BEDROCK_TAGS_REMOTE "op-chain-ops/$VERSION"
-cd ../op-node
-go get github.com/ethereum-optimism/optimism/op-bindings@$VERSION
-go get github.com/ethereum-optimism/optimism/op-service@$VERSION
-go get github.com/ethereum-optimism/optimism/op-chain-ops@$VERSION
-go mod tidy
-echo Please update the version to ${VERSION} in op-node/version/version.go
-read -p "Press [Enter] key to continue"
-git add .
-git commit -am 'chore: Upgrade op-node dependencies'
-git push $BEDROCK_TAGS_REMOTE
-git tag "op-node/$VERSION"
-git push $BEDROCK_TAGS_REMOTE "op-node/$VERSION"
-cd ../op-proposer
-go get github.com/ethereum-optimism/optimism/op-bindings@$VERSION
-go get github.com/ethereum-optimism/optimism/op-service@$VERSION
-go get github.com/ethereum-optimism/optimism/op-node@$VERSION
-go mod tidy
-echo Please update the version to ${VERSION} in op-proposer/cmd/main.go
-read -p "Press [Enter] key to continue"
-git add .
-git commit -am 'chore: Upgrade op-proposer dependencies'
-git push $BEDROCK_TAGS_REMOTE
-git tag "op-proposer/$VERSION"
-git push $BEDROCK_TAGS_REMOTE "op-proposer/$VERSION"
-cd ../op-batcher
-go get github.com/ethereum-optimism/optimism/op-bindings@$VERSION
-go get github.com/ethereum-optimism/optimism/op-service@$VERSION
-go get github.com/ethereum-optimism/optimism/op-node@$VERSION
-go get github.com/ethereum-optimism/optimism/op-proposer@$VERSION
-go mod tidy
-echo Please update the version to ${VERSION} in op-batcher/cmd/main.go
-read -p "Press [Enter] key to continue"
-git add .
-git commit -am 'chore: Upgrade op-batcher dependencies'
-git push $BEDROCK_TAGS_REMOTE
-git tag "op-batcher/$VERSION"
-git push $BEDROCK_TAGS_REMOTE "op-batcher/$VERSION"
-cd ../op-e2e
-go get github.com/ethereum-optimism/optimism/op-bindings@$VERSION
-go get github.com/ethereum-optimism/optimism/op-service@$VERSION
-go get github.com/ethereum-optimism/optimism/op-node@$VERSION
-go get github.com/ethereum-optimism/optimism/op-proposer@$VERSION
-go get github.com/ethereum-optimism/optimism/op-batcher@$VERSION
-go mod tidy
-git add .
-git commit -am 'chore: Upgrade op-e2e dependencies'
-git push $BEDROCK_TAGS_REMOTE
-git tag "op-e2e/$VERSION"
-git push $BEDROCK_TAGS_REMOTE "op-e2e/$VERSION"
\ No newline at end of file
--- a/ops/scripts/update-op-geth.py
+++ b/ops/scripts/update-op-geth.py
-#!/usr/bin/env python3
-import json
-import subprocess
-import os
-GETH_VERSION='v1.11.2'
-def main():
-	for project in ('.', 'indexer'):
-		print(f'Updating {project}...')
-		update_mod(project)
-def update_mod(project):
-	print('Replacing...')
-	subprocess.run([
-		'go',
-		'mod',
-		'edit',
-		'-replace',
-		f'github.com/ethereum/go-ethereum@{GETH_VERSION}=github.com/ethereum-optimism/op-geth@optimism'
-	], cwd=os.path.join(project), check=True)
-	print('Tidying...')
-	subprocess.run([
-		'go',
-		'mod',
-		'tidy'
-	], cwd=os.path.join(project), check=True)
-if __name__ == '__main__':
-	main()
--- a/ops/scripts/wait-for-sequencer.sh
+++ b/ops/scripts/wait-for-sequencer.sh
-#!/bin/bash
-CONTAINER=l2geth
-RETRIES=90
-i=0
-until docker-compose logs l2geth | grep -q "Starting Sequencer Loop";
-do
-    sleep 1
-    if [ $i -eq $RETRIES ]; then
-        echo 'Timed out waiting for sequencer'
-        exit 1
-    fi
-    echo 'Waiting for sequencer...'
-    ((i=i+1))
-done